Epix14+ LED Lightbar with Strobe - 14" 120Watt 9800Lumen Powerboost Driving Beam - Amber or White DRL - LEDSON
✓ Exclusive design will make you visible with style
✓ Integrated position light, R65 approved strobe light
✓ Epix14+ Prime Strobe reaches 530 m at 1 lux with Powerboost
Epix+ Prime stands out from the crowd with a self-developed sporty design, created with today’s modern cars in mind. Approved R65 warning lights ensure your visibility and the world-unique position light is fully integrated into the reflector.
Epix14+ Prime is also available without strobe lights.
The dynamic ignition of the position lights gives the bar an effective start-up. Everything you need and want in a LED bar, you’ll find with Epix+ Prime. We have maximized performance in an E-approved mode, with the option for Powerboost when you choose to go ”off-road". Approved R65 strobe lights ensure your visibility when working on the road and keep you safe in all weather and times of the day. Self-developed smart mounts ensure easy installation almost anywhere on the vehicle, however you prefer.
Epix+ Prime is for you who want a futuristic experience
The design of the bar is uniquely developed by Ledson and is in harmony with today's most modern cars, taking your vehicle to the next level. Its dynamic position light turns on with a powerful movement that neatly guides the light from one side of the bar to the next before fully lighting up. The position light is integrated into the reflector, a completely unique feature that makes you stand out a little extra.
Powerboost: how much light do you want?
As if this wasn’t enough to look forward to, you also have the option to use Powerboost. Simply tighten or loosen the screw in the back of the LED bar to switch between E-approved mode or ”off road” Powerboost mode, for occasions when you need maximum brightness on the road ahead.
Driving Beam light pattern
Driving Beams reflectors are all computer generated and manufactured to provide a similar light image as combo. It mimics and enhances the car's existing headlight and light pattern.
Features and technical data:
R65 approved strobe lights with 10 different strobe patterns
Position light with unique dynamic ignition, integrated in the reflector
Selectable position light in xenon white or yellow/orange
Driving Beam light pattern (wide and oblong)
E-marked R112 (ref. no 25), R7, R65, R10 (EMC rated) - Read more about UNECE regulations here
Range in E-approved mode: 328 m (1 lux),
Range in powerboost mode: 459 m (1 lux)
E-approved mode: 4 560 lumens (theoretical), 3 650 lumens (actual)
Powerboost mode: 9 800 lumens (theoretical), 7 300 lumens (actual)
Color temperature 5000K (Neutral White)
120 W (8 x 15 W LEDs)
Voltage: 9-36V
IP69K (water/dustproof)
Aluminum housing and polycarbonate lens
Side reflective optics
Pressure equalization membrane
Electronic heat management
DT connector (supplied)
Supplied:
Epix14+ Strobe 14" LED bar with Powerboost
Bolts and screws to attach the bar to appropriate surface
Smart mounting details
DT cable 6-pin (you will also need a DT harness found here)
Installation instructions
Dimensions & weight (excl mounting):
Width: 357 mm
Height: 43 mm
Depth: 61 mm
Weight: 1,2 kg
Flash patterns:
Single flash synchronization: 2.2HZ
Single flash asynchronous: 2.2HZ
Triple flash synchronization: 1.1HZ
Triple flash asynchronous: 1.1HZ
Quadruple flash synchronization: 1.25HZ
Quadruple flash asynchronous: 1.25HZ
Combination of one long and five short synchronization: 0.83HZ
Combination of one long and five short asynchronous: 0.83HZ
Burst flash synchronization: 10HZ
Burst flash asynchronous: 10HZ
NOTE: The DT connector must not be cut as it entails an increased risk of moisture damage and the warranty then ceases to apply.