Bullet Style Reversing Camera

TECHNICAL PARAMETERS:
• Video: colour
• System: PAL/NTSC
• Resolution: 480 ppi
• Camera colour: black
IDEAL FUNCTIONING PARAMETERS:
• Voltage: 12V
• Temperature: -20°C to +70°C
• Min. illumination: 0.1 lux
CONTENTS OF THE PACKAGE
• camera
• RCA cable
• signal and power cable
• Mounting screws
MOUNTING THE REVERSING CAMERA
Select a suitable location for mounting the reversing camera to the rear of the vehicle.
Ensure that the mounting surface is clean and dry.
Use the supplied mounting accessories (brackets / screws
/ wires) to secure the camera in the selected location.
Ensure that the mounting is stable and secure.
CONNECTING THE CAMERA TO THE SYSTEM
Locate the input for the reversing camera on the multimedia system or display in the car.
Connect the cables from the reversing camera to the appropriate ports on your multimedia system or display.
These are usually the video (yellow) and power (red) ports.
Make sure that the connections are stable and properly
secured.
SYSTEM SETTINGS
Turn the car on and start the multimedia system or display
to which the reversing camera is connected.
Enter the system settings, usually via the main menu or
the function buttons.
Find the ‚Reversing camera settings’ section or a similar
name and enter it.
Adjust preferences such as brightness, contrast, image
inversion (if necessary) and other settings related to the
reversing camera.
USING THE REVERSING CAMERA
Switch to reverse mode by engaging reverse gear.
Observe the display of the multimedia system or the display of the car.
2
The reversing camera should display an image of the rear
of the vehicle in real time.
Use the camera image to monitor your vehicle’s surroundings and perform reversing manoeuvres safely.
Remember that the reversing camera is one tool to assist,
but does not replace the need to check with mirrors and
use other methods of observing your surroundings.