5ft Purelux Flash 1600 Gen2 Roof Warning Beacon Bar with Controller
A modern beacon panel designed for demanding professional use, equipped with, among other things, 12 flashing functions, a warning light approved for road use, a shock-, water- and dust-resistant construction, and the best possible radio interference protection. Suitable for both 12V and 24V systems.
R65 approved warning light
Separate day and night spaces (R65 Class 2)
12 different flashing functions
Separate Cruise mode
360° lighting
Highest possible tightness rating
The best radio interference protection on the market
Gorgeous dark profile
Purelux Flash 1600 Gen2 is a new generation warning light panel with an extremely low and aerodynamic profile that meets the quality standards of demanding work in every area. The panel is equipped with, among other things, 12 different flashing functions, a warning light approved for road use according to the R65 standard, an impact, water and dust resistant structure, the best possible radio interference protection (CISPR25 Class 5) and a modern dark appearance. In addition, the panel also has a Cruise mode, which is often needed in mines, for example, where the light can be lit evenly without flashing. The panel spreads the light 360° around it, so it increases the safety of everyone moving around the vehicle. In addition, it has both day and night operating modes in accordance with the ECE R65 Class 2 classification (the light is brighter in day mode and dimmer in night mode), which means that the light does not dazzle anyone at night, but still attracts attention during daylight hours.
In terms of size, power and functions, the Flash 1600 Gen2 is an excellent warning light for trucks, trailers and larger machinery. If desired, several Flash Gen2 beacon panels can also be synchronized to work with each other, which provides uniform lighting even on larger vehicles where several lights are installed.
The panel's significantly lower profile than a normal beacon and short skids ensure an aerodynamic and stylish installation that can withstand both speed and gaze. The panel's thin structure reduces air resistance and reduces wind noise, and the mounting skids allow the panel to rise slightly above the installation surface, allowing airflow to pass under the panel. The smoke-gray and impact-resistant polycarbonate lens wraps around the sides of the beacon as well as the top, giving the light a stunning visual appearance even when turned off.
Delivery content
Beacon panel Purelux Flash 1600 Gen2
Mounting rails
Mounting bolts
Power cable without connector, 5000 mm
Installation instructions (FI/EN/SE/NO/DK)
Specifications
Brand and model: Purelux Flash 1600 Gen2
Intended use: As a warning and safety light in cars / work machines, etc.
Operating voltage: 10-36V
Manufacturer's stated current consumption: 13.5A @ 12V / 6.79A @ 24V
Manufacturer's declared power: 163 W
Mounting: Mounting foot set, mounting bolts
Connector: No connector, straight wires
Cable length: 500 cm
Dimensions: 1584 x 35 x 240 mm (Width/Height/Depth)
Height with skids: 77 mm
IP rating: IP69K
Approvals: EMC: ECE R10, R65 Class 2, CISPR25 Class 5, CE, RoHS
Operating temperature: -40°C - +50°C
Warranty: 24 months
Other: 12 different operating modes, orange light, very low profile, 360° illumination
Importer: Handshake.fi
Operating modes
Single flash (R65 Class 2 )
Fast double flash (R65 Class 2)
Slow double flash
Multi-flash
Combo single/double flash output
Combo single/multiple flash
Breathe
Turn signal left
Right turn signal
Arrow from the center
Cruise (connected with a separate wire, see quick guide)
R65 night mode (connected with a separate wire, see quick guide)
Quick guide
Coupling
Red: Power (+)
Black: Ground (-)
Yellow: Warning light functions and synchronization
Blue: Warning light #1 (R65 Night Mode)
White: Cruise (Steady light)
Brown: Traffic control, left/right
Hazard light functions: Touch the red wire with the yellow wire for less than 1 second to switch the flashing functions.
Synchronization: Connect the yellow wire of each luminaire to be synchronized.
Flashing function #1 (R65): Touch the red wire with the blue wire for less than 1 second.
Night mode: Touch the red wire with the blue wire for 5 seconds. The light brightness will decrease by 50% in all flashing modes (does not apply to steady light). To disable night mode, disconnect the wire.
Steady light: Connect the white wire to the red wire. To disable steady light, disconnect the wire. The warning panel will return to the last flashing function used.
Traffic control: Touch the red wire with the brown wire for 1 second. The light activates the left turn signal. Touch the red wire with the brown wire for 5 seconds to activate the right turn signal.