2ft Purelux Flash 600 Gen2 Roof Warning Beacon Bar with Controller
A modern beacon panel designed for demanding professional use, equipped with, among other things, 12 flashing functions, a warning light approved for road use, a shock-, water- and dust-resistant construction, and the best possible radio interference protection. Suitable for both 12V and 24V systems.
R65 approved warning light
Separate day and night modes (R65 Class 2)
12 different flashing functions
Separate Cruise mode
360° lighting
Highest possible IP rating
The best radio interference protection on the market
Stylish dark profile
The Purelux Flash 600 Gen2 is a new generation warning light panel with an ultra-low and aerodynamic profile that meets the quality standards of demanding work environments in every aspect. The panel is equipped with 12 different flashing functions, a warning light approved for road use according to the R65 standard, an impact, water and dust resistant construction, the best possible radio interference protection (CISPR25 Class 5) and a modern dark appearance. In addition, the panel also features the much-needed Cruise mode, which allows the light to burn steadily without flashing, for example in mines. The panel spreads the light 360° around the vehicle, increasing the safety of everyone around the vehicle. In addition, it has both day and night modes (brighter in daytime and dimmer at night), in accordance with ECE R65 Class 2, so that the light does not dazzle at night, but still attracts attention in bright light.
In terms of size, power and functionality, the Flash 600 Gen2 is an excellent warning light for cars, vans and SUVs, as well as part of a lighting solution for smaller machinery. In addition, multiple Flash Gen2 beacon panels can also be synchronised to work together to provide uniform lighting even in larger vehicles where multiple lights are required.
The panel's significantly lower profile than a normal beacon and short skids ensure an aerodynamic and stylish installation that can withstand both speed and gaze. The panel's thin structure reduces air resistance and reduces wind noise, and the mounting skids allow the panel to be slightly raised from the installation surface, allowing airflow to pass under the panel. The smoke-gray and impact-resistant polycarbonate lens wraps around the sides of the beacon as well as the top, giving the light a stunning visual appearance even when turned off. Two-year (24 months) warranty!
Delivery content
Beacon panel Purelux Flash 600 Gen2 & Controller
Mounting rails
Mounting bolts
Power cord, 5000 mm
Installation instructions (FI/EN/SE/NO/DK)
Specifications
Brand and model: Purelux Flash 600 Gen2
Intended use: As a warning and safety light in cars / work machines, etc.
Operating voltage: 10-36V
Manufacturer's stated current consumption: 7A @ 12V / 3.22A @ 24V
Manufacturer's declared power: 84 W
Mounting: Mounting foot set, mounting bolts
Connector: No connector, straight wires
Cable length: 500 cm
Dimensions: 584 x 35 x 240 mm (Width/Height/Depth)
Height with skids: 77 mm
Weight (with legs): 4500 g
IP rating: IP69K
Approvals: EMC: ECE R10, R65 Class 2, CISPR25 Class 5, CE, RoHS
Operating temperature: -40°C - +50°C
Warranty: 24 months
Other: 12 different operating modes, orange light, Ultra low profile, 360° illumination
Importer: Handshake.fi
Operating modes
Single flash (R65 Class 2 )
Fast double flash (R65 Class 2)
Slow double flash
Multi-flash
Combo single/double flash output
Combo single/multiple flash
Breathe
Left arrow
Right arrow
Arrow from the middle
Cruise (connected with a separate wire, check quick guide)
R65 Night mode (connected with a separate wire, check quick guide)
Quick guide
Coupling
Red: Power (+)
Black: Ground (-)
Yellow: Warning light functions and synchronization
Blue: Warning light #1 (R65 Night Mode)
White: Cruise light
Brown: Traffic control, left/right
Hazard light functions: Touch the red wire with the yellow wire for less than 1 second to switch the flashing functions.
Synchronization: Connect the yellow wire of each luminaire to be synchronized.
Flashing function #1 (R65): Touch the red wire with the blue wire for less than 1 second.
Night mode: Touch the red wire with the blue wire for 5 seconds. The light brightness will decrease by 50% in all flashing modes (does not apply to steady light). To disable night mode, disconnect the wire.
Steady light: Connect the white wire to the red wire. To disable steady light, disconnect the wire. The warning panel will return to the last flashing function used.
Traffic control: Touch the red wire with the brown wire for 1 second. The light activates the left turn signal. Touch the red wire with the brown wire for 5 seconds to activate the right turn signal.