15" Purelux Flash 400 Gen2 Magnetic Roof Warning Beacon Bar (Lighter Plug)
A modern beacon panel designed for demanding professional use, equipped with, among other things, 9 flashing functions, a warning light approved for road use, a shock-, water- and dust-resistant construction, and the best possible radio interference protection. Works directly from the cigarette lighter socket!
Works from the cigarette lighter socket
Magnetic mounting
R65 approved warning light
9 different flashing functions
360° lighting
Highest possible IP rating
The best radio interference protection on the market
Stylish dark profile
The Purelux Flash 400 Gen2 is a new generation warning light panel with a very low and aerodynamic profile that meets the quality standards of demanding work in every area. The panel is equipped with, among other things, 9 different flashing functions, a warning light approved for road use according to the R65 standard, a shock-, water- and dust-resistant structure, the best possible radio interference protection (CISPR25 Class 5) and a modern dark appearance. Unlike many other beacon panels, the Flash 400 Gen2 is also very easy to install, as it is powered directly from the vehicle's cigarette lighter socket and is attached using magnetic feet. This means that the light does not require any connections to be put into operation, and there is no need to drill holes in the vehicle for mounting bolts! The Purelux Flash 400 Gen2 is the perfect choice for, for example, maintenance and control vehicles and all applications where the beacon is not needed constantly, but you want to remove it whenever you are not using it. The Flash 400 Gen2 spreads light 360° around it, increasing the safety of everyone around the vehicle.
The panel's significantly lower profile than a normal beacon and short skids ensure an aerodynamic and stylish installation that can withstand both speed and gaze. The panel's thin structure reduces air resistance and reduces wind noise, and the mounting skids allow the panel to be slightly raised from the mounting surface, allowing airflow to pass under the panel. The smoke-gray and impact-resistant polycarbonate lens wraps around the sides of the beacon as well as the top, giving the light a stunning visual appearance even when turned off.
Delivery content
Beacon panel Purelux Flash 400 Gen2
Magnetic skates
Power cord with cigarette lighter plug, 4000 mm
Installation instructions (FI/EN/SE/NO/DK)
Specifications
Brand and model: Purelux Flash 400 Gen2
Intended use: As a warning and safety light in cars / work machines, etc.
Operating voltage: 10-36V
Manufacturer's stated current consumption: 6.5A @ 12V / 2.85A @ 24V
Manufacturer's declared power: 78 W
Mounting: Magnetic mounts
Connector: Cigarette lighter plug
Cable length: 400 cm
Dimensions: 384 x 35 x 240 mm (Width/Height/Depth)
Height with skids: 77 mm
Weight (with legs): 3000 g
IP rating: IP69K
Approvals: EMC: ECE R10, R65 Class 1, CISPR25 Class 5, CE, RoHS
Operating temperature: -40°C - +50°C
Warranty: 24 months
Other: 9 different operating modes, orange light, Ultra low profile, 360° illumination
Importer: Handshake.fi
Operating modes
Single flash (R65 Class 1)
Fast double flash (R65 Class 1)
Slow double flash
Multi-flash
Combo single/double flash output
Combo single/multiple flash
Breathe
Left arrow
Right arrow
Quick guide
Operation: The lamp is connected to the vehicle's cigarette lighter socket. The socket has an On/Off switch and a separate Mode switch for changing operating modes. The operating modes change with each press when the lamp is on.