Strobe Controller Unit - Make any Light Constant Strobe!

A control unit that converts additional light with a maximum power of 35W into a continuously flashing warning light. Operating voltage 12/24V.

The Purelux Strobe Controller CS is a control unit that allows you to convert additional light with a maximum power of 35W into a flashing warning light. The control unit is connected between the power source and the light, whereupon the unit adjusts the power supply from the power source from constant to instantaneous. With the Strobe Controller, you don't have to look for additional lights that already have a flash function, but you can choose the additional light that suits your vehicle best in terms of size or shape, for example. In this way, you can easily get the desired light that fits your vehicle with the functions you want. The controller has a flash pattern of three quick flashes, followed by a pause of about one second. The Purelux Strobe Controller CS is suitable for both 12V and 24V.

The control unit can be connected to either one lamp with an output of less than 35W or several lamps with a total output of less than 35W.

Note! If you want a control unit that can switch between steady and flashing light, we recommend the Purelux 12/24V Strobe Controller.

Technical specification

Make and model: Flash light adapter Purelux 12/24V Strobe Controller CS
Area of use: Converts steady light into flashing
Operating voltage: 12/24 V
Max. load: 35W
Dimensions: 48 x 27 x 13 mm (Length x Width x Depth)
Warranty: 12 months
Quick guide
The control unit is connected between the power source, e.g. the battery, and the lamp to be connected so that the control unit stops between the switch and the lamp. The control unit has a total of four wires, one red and one black wire from each end. The black wire at one end is connected to the negative pole of the power source and the red wire to the switch. At the corresponding end, the red and black wires are connected to the lamp's power cable and to the earth cable.