{"title":"Pureluk","description":"","products":[{"product_id":"super-slim-reversing-light-purelux-phantom","title":"Super Slim Reversing Light - Purelux Phantom - 1395Lumens (Credit Card Size!!) **BEST SELLER**","description":"\u003cp\u003eA very small and slim e-approved reversing light \/ work light with a wide beam pattern, 1395 lumens and a colour temperature of 5000 K. Only slightly larger than a credit card, it is suitable for tight and discreet installations. Suitable for 12V and 24V systems.\u003c\/p\u003e\n\u003cp\u003eThe Purelux Phantom is a very slim and small, yet powerful reversing \/ work light, which is intended primarily for tight spaces and inconspicuous installations, e.g. at the bottom of the bumper. It is e-approved to be as a reversing light (R148). The Phantom produces a measured light output of almost 1,400 lumens, and the light beam, which opens evenly and very wide in the lateral direction to the surrounding environment, has a measured distance of 35 m (@ 1 lux). The cone is vertically flattened for low installation heights. The Phantom's light color tone is a neutral 5000 kelvin that reduces eye strain, which makes it easy to observe the environment in the dark. Measuring 90 x 40mm and 15mm thick, the light can be installed literally anywhere, and unlike most work lights, the Phantom is actually easy to hide in vehicle structures thanks to its flat and sleek design.\u003c\/p\u003e\n\u003cp\u003eThe light's small size and relatively excellent light output enable versatile use in various vehicles, from ATVs and passenger cars to work machines. The Phantom is easy to hide in the mask, skirts, under the bumpers and even on the roof, and the wide light pattern makes it an excellent choice for lighting the vehicle's surroundings and, for example, as a reversing light. Thanks to its water-, dust- and corrosion-resistant construction, the lamp can also be installed in places where it is exposed to road salt, UV radiation, water and other environmental stresses. In addition, the light's exceptionally good temperature resistance (-40°C to +60°C) guarantees operational reliability even in extreme conditions. The lamp is protected against radio interference according to the ECE R10 standard, and it can be installed in both 12V and 24V systems. Two-year (24 months) warranty!\u003c\/p\u003e\n\u003cp\u003eDelivery content\u003cbr\u003eX1 Purelux Phantom Light\u003cbr\u003eMounting foot\u003cbr\u003eRubber installation background for Legs\u003cbr\u003eInstallation and connection instructions (EN\/FI\/SE\/NO\/DK)\u003c\/p\u003e\n\u003cp\u003eSpecifications\u003cbr\u003eBrand and model: Purelux Phantom\u003cbr\u003ePurpose: As a work light in vehicles \/ machinery\u003cbr\u003eOperating voltage: 9-32V\u003cbr\u003ePower consumption measured by Valostore: 1.75A @ 12V \/ 0.875A @ 24V\u003cbr\u003ePower declared by the manufacturer: 20.8 W\u003cbr\u003eLight output declared by the manufacturer: 1384 lm\u003cbr\u003eColor temperature stated by the manufacturer: 5000 K\u003cbr\u003eMounting: Mounting foot\u003cbr\u003eConnector: No connector, straight wires\u003cbr\u003eCable length: approx. 50 cm\u003cbr\u003eDimensions: 90 x 15 x 40 mm (Width x Height x Depth)\u003cbr\u003eHeight with mounting foot: 22.4 mm\u003cbr\u003eWeight: 90 g\u003cbr\u003eIP rating: IP67\u003cbr\u003eOperating temperature: -40°C to +60°C\u003cbr\u003eApprovals: EMC ECE R10, R148, CE, RoHS\u003cbr\u003eWarranty: 24 months\u003c\/p\u003e","brand":"Purelux","offers":[{"title":"Default Title","offer_id":50633314369874,"sku":"19306","price":29.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/2833\/9608\/files\/IMG_3934.jpg?v=1745363068"},{"product_id":"very-compact-led-work-light-purelux-terrain-black-mini-1200lumen","title":"Very Compact LED Work Light - Purelux Terrain Black Mini - 1200Lumen","description":"\u003cp\u003eVery compact (53 x 53 mm) work lighting with a wide light pattern. Perfect for installation in tight spaces. The wide operating voltage 9-32 V makes it suitable for several systems.\u003c\/p\u003e\n\u003cp\u003eThe Purelux Terrain Black Mini is a really stylish work light that provides a wide light pattern. Purelux Black Mini is suitable for situations where you want a discreet installation, for example as a reversing light, on the roof of the vehicle or in the front. Despite its compact size of only 53 x 53 mm (width x height), the Purelux Black Mini has a high performance combined with a high-quality ribbed polycarbonate lens with a measured range of 39 m @ 1 lux! Thanks to its compact size, the lighting can also be easily installed in really tight spaces.\u003c\/p\u003e\n\u003cp\u003eThe shock and vibration resistant aluminum structure combined with a virtually unbreakable polycarbonate lens and an advanced heat management system ensure durability even under heavy use. Durability is also increased with the robust stainless steel mounting base, which ensures that the work light stays in place. In addition, the Purelux Terrain Black Mini is dust and waterproof according to class IP67. The wide operating voltage (10-30 V) enables installation in both 12V and 24V systems\u003c\/p\u003e\n\u003cp\u003eContent\u003cbr\u003ePurelux Terrain Black Mini\u003cbr\u003eMounting foot\u003cbr\u003eFastening bolt\u003cbr\u003eInstallation and operating instructions (EN, FI, SE, NO)\u003cbr\u003eTechnical specification\u003c\/p\u003e\n\u003cp\u003eLED: 4 x 3W Osram\u003cbr\u003eOperating voltage: 10-30 V (DC)\u003cbr\u003eManufacturer's reported current consumption: 0.75 A @ 12 V \/ 0.43 A @ 24 V\u003cbr\u003eMeasured current consumption: 0.75 A @ 12 V \/ 0.43 A @ 24 V\u003cbr\u003eEstimated power: 12 W\u003cbr\u003eManufacturer's reported power: 11.2 W\u003cbr\u003eMeasured power: 10.4 W\u003cbr\u003eTheoretical luminous flux: 1200 lm\u003cbr\u003eMeasured luminous flux: 920 lm\u003cbr\u003eMeasured range: 77 m @ 0.25 lux \/ 39 m @ 1 lux\u003cbr\u003eManufacturer's reported color temperature: 6000 K\u003cbr\u003eMeasured color temperature: 5853 K\u003cbr\u003eIllumination angle: 90°\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMounting: Mounting foot\u003cbr\u003eContact: Direct wire, no contact\u003cbr\u003eCable length: approx. 50 cm\u003cbr\u003eDimensions: 53 x 53 x 32 mm (Width x Height x Depth)\u003cbr\u003eHeight with mounting foot: 75 mm\u003cbr\u003eWeight: 180 g\u003cbr\u003eProtection class: IP67\u003cbr\u003eApprovals: CE, RoHS\u003cbr\u003e\u003c\/p\u003e","brand":"Purelux","offers":[{"title":"Default Title","offer_id":50633357197650,"sku":"12187","price":29.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/2833\/9608\/files\/IMG_3953.jpg?v=1745363169"},{"product_id":"h4-smart-adapter-gives-signal-wire-for-relay-for-spots-lightbar","title":"H4 Smart Adapter (Gives Signal Wire for Relay for Spots\/Lightbar)","description":"\u003cp\u003eSmart adapter that takes control current from the car's own wiring to the auxiliary light's lamp with an H4 socket.\u003c\/p\u003e\n\u003cp\u003eUsed to capture the control current. With the adapter, the control current for the auxiliary light's relay cable set can be taken from the car's own lamp. The adapter is connected between the socket of the lamp and the plug coming from the car (connected to the socket of the lamp), so the \"extra\" wire coming from the adapter is used to take the control current. The control current of the relay cable set is therefore connected to this extra wire. The adapter makes it possible to capture the control current from the car's lamp without having to make any changes to the car's original wiring.\u003c\/p\u003e\n\u003cp\u003eTechnical specification\u003c\/p\u003e\n\u003cp\u003eBrand and model: Adapter cable Purelux, H4\u003cbr\u003eArea of use: Takes control current from the car's own wiring to the auxiliary light\u003cbr\u003eConnects between the H4 lamp and the connector from the car\u003c\/p\u003e","brand":"Purelux","offers":[{"title":"Default Title","offer_id":50633369616722,"sku":"","price":8.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/2833\/9608\/files\/IMG_39432.jpg?v=1745363862"},{"product_id":"h7-smart-adapter-gives-signal-wire-for-relay-for-spots-lightbar","title":"H7 Smart Adapter (Gives Signal Wire for Relay for Spots\/Lightbar)","description":"\u003cp\u003eSuper smart adapter to take ignition current from an H7 lamp. Mounted between the lamp and the base, the ignition current is taken with its own cable.\u003c\/p\u003e\n\u003cp\u003eSmart adapter used to take ignition current from lamps with H7 sockets. Makes it possible to get ignition current for additional lights from the car's own lights. The adapter is mounted between the lamp and the socket on the car, whereupon the adapter's \"excess\" red cable is used to take ignition current. The ignition cable of the relay cable set is thus connected to this cable. The adapter makes it possible to take ignition current from the car without having to affect the original cables.\u003c\/p\u003e\n\u003cp\u003eTechnical specification\u003cbr\u003eProduct: Adapter for ignition current, H7\u003cbr\u003eAttached between an H7 bulb and the base of the car\u003cbr\u003eMakes it possible to take ignition current from the car's high beam without affecting the original cables\u003c\/p\u003e","brand":"Purelux","offers":[{"title":"Default Title","offer_id":50633369944402,"sku":null,"price":8.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/2833\/9608\/files\/IMG_3954.jpg?v=1745364387"},{"product_id":"magnetic-cable-clip-mount-cable-clamp","title":"Magnetic Cable Clip Mount (cable clamp)","description":"\u003cp\u003eA cable clamp that attaches to metal surfaces with a strong magnet, which allows for example the wiring harnesses of work and additional lights to be installed neatly and in a controlled manner. Can also be used, for example, for cable runs in halls. The diameter of the stand is 22 mm\u003c\/p\u003e\n\u003cp\u003eThe Purelux Magnetic Cable Clip Mount is a magnetic cable clip that allows, for example, the wiring harnesses of additional or work lights to be installed neatly and unobtrusively. There is a very strong magnet at the bottom of the bracket, with which it firmly sticks to any metal surface. This way, for example, the wires of the lights installed on the roof of the vehicle can be easily and above all controlled inside, and there is no need to tape them to the side of the car or make any other adjustments to complete the finished installation. In addition to the installation of additional and work lights, Magnetic Cable Clip Mounts can be used for many other purposes, such as the installation of warning lights or emergency lights. They can also be used, for example, to pull cables into the wall or ceiling structures of halls. There are practically unlimited uses for fasteners!   The wires can be bundled into a tight package with the clip provided in the bracket, so you don't need additional cable ties!\u003c\/p\u003e\n\u003cp\u003eDue to the strong magnets, the brackets are not recommended to be installed too close to critical electrical parts of vehicles, such as control units or sensors. Max. can be installed on the bracket. 15 mm wide wire\/wire bundle.\u003c\/p\u003e\n\u003cp\u003eTechnical information\u003c\/p\u003e\n\u003cp\u003eProduct: Purelux Magnetic Cable Clip Mount, 22 mm\u003cbr\u003ePurpose: Neat attachment of cables\u003cbr\u003eA powerful magnet\u003cbr\u003eInner diameter of the bracket: 15 mm\u003cbr\u003eBase diameter: 22 m\u003cbr\u003e1 piece \/ box\u003c\/p\u003e","brand":"Purelux","offers":[{"title":"Default Title","offer_id":50643834175826,"sku":"","price":3.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/2833\/9608\/files\/IMG_39442.jpg?v=1745531042"},{"product_id":"strobe-controller-unit-make-any-light-constant-strobe","title":"Strobe Controller Unit - Make any Light Constant Strobe!","description":"\u003cp\u003eA control unit that converts additional light with a maximum power of 35W into a continuously flashing warning light. Operating voltage 12\/24V.\u003c\/p\u003e\n\u003cp\u003eThe Purelux Strobe Controller CS is a control unit that allows you to convert additional light with a maximum power of 35W into a flashing warning light. The control unit is connected between the power source and the light, whereupon the unit adjusts the power supply from the power source from constant to instantaneous. With the Strobe Controller, you don't have to look for additional lights that already have a flash function, but you can choose the additional light that suits your vehicle best in terms of size or shape, for example. In this way, you can easily get the desired light that fits your vehicle with the functions you want. The controller has a flash pattern of three quick flashes, followed by a pause of about one second. The Purelux Strobe Controller CS is suitable for both 12V and 24V.\u003c\/p\u003e\n\u003cp\u003eThe control unit can be connected to either one lamp with an output of less than 35W or several lamps with a total output of less than 35W.\u003c\/p\u003e\n\u003cp\u003eNote! If you want a control unit that can switch between steady and flashing light, we recommend the Purelux 12\/24V Strobe Controller.\u003c\/p\u003e\n\u003cp\u003eTechnical specification\u003c\/p\u003e\n\u003cp\u003eMake and model: Flash light adapter Purelux 12\/24V Strobe Controller CS\u003cbr\u003eArea of use: Converts steady light into flashing\u003cbr\u003eOperating voltage: 12\/24 V\u003cbr\u003eMax. load: 35W\u003cbr\u003eDimensions: 48 x 27 x 13 mm (Length x Width x Depth)\u003cbr\u003eWarranty: 12 months\u003cbr\u003eQuick guide\u003cbr\u003eThe control unit is connected between the power source, e.g. the battery, and the lamp to be connected so that the control unit stops between the switch and the lamp. The control unit has a total of four wires, one red and one black wire from each end. The black wire at one end is connected to the negative pole of the power source and the red wire to the switch. At the corresponding end, the red and black wires are connected to the lamp's power cable and to the earth cable.\u003c\/p\u003e","brand":"Purelux","offers":[{"title":"Default Title","offer_id":50653457940818,"sku":"","price":14.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/2833\/9608\/files\/IMG_3964.jpg?v=1745708028"},{"product_id":"strobe-controller-unit-make-any-light-strobe-switchable-normal-light-to-strobe","title":"Strobe Controller Unit - Make any Light Strobe! (Switchable, Normal Light to Strobe)","description":"\u003cp\u003eA control unit designed to convert a constant shining light into one with a flashing function. Max 35W. Operating voltage 12\/24 V.\u003c\/p\u003e\n\u003cp\u003eThe Purelux Strobe Controller is a controller that can control basically any 35W luminaire and turns it into a flashing warning light. The control unit is connected between the power supply and the light source and adapts and changes the power supply from constant to instantaneous. When the lamp is on, it normally shines evenly. When the power is turned off and then on again, the control box changes the current from steady to momentary, which causes the light to flash, ie the controller does not limit the normal use of the light, but the flash function can be turned on or off if desired. This means that both a stable and constant light image and a flashing light image can be used as needed. With the flash function, the light flashes quickly three times, followed by a pause of about one second, then flashes again three times quickly. (1-1-1-0-1.. etc) The Purelux Strobe Controller is suitable for both 12V and 24V systems.\u003c\/p\u003e\n\u003cp\u003eLuminaires and lights with an output below 35W, or several lamps with a total lower output of 35 W can be connected to the control unit.\u003c\/p\u003e\n\u003cp\u003eTechnical specification\u003c\/p\u003e\n\u003cp\u003eMake and model: Strobe Controller Purelux 12\/24V\u003cbr\u003eArea of application: Convert constant light to momentary\u003cbr\u003eOperating voltage: 12\/24 V\u003cbr\u003eMax load: 35W\u003cbr\u003eDimensions: 48 x 27 x 13 mm (Length x Width x Depth)\u003cbr\u003eWarranty: 12 months\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eQuick guide\u003cbr\u003eThe control unit is connected between the power source, e.g. the battery, and the lamp. Four wires come from the controller, one red and one black wire from both ends. The black wire at one end is connected to the minus of the power source and the red wire to the switch. Correspondingly, the red and black wires coming from the other end are connected to the lamp's power cable and to the ground cable.\u003c\/p\u003e","brand":"Purelux","offers":[{"title":"Default Title","offer_id":50653459775826,"sku":"","price":24.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/2833\/9608\/files\/IMG_3963.jpg?v=1745708639"},{"product_id":"mini-switch-panel-4-way-12v-24v","title":"Mini Switch Panel - 4 Way - 12v \/24v","description":"\u003cp\u003eAn easy-to-use and practical switch panel that can be used to control up to four different electrical devices from the same location. Suitable for, for example, managing work lighting or warning lights on a small work machine or SUV.\u003c\/p\u003e\n\u003cp\u003eThe Purelux Mini Dashboard Controller is a very convenient and user-friendly switch panel that can control up to four different electrical devices from the same location. It is ideal for managing work and auxiliary lights, warning and attention lights or warning lights on, for example, a small work machine, van or SUV. The lights connected to the switch panel can be turned on and off individually, and the power switch in the middle can be used to turn off all devices installed behind the panel at the same time. The lighting can be turned on either continuously (by pressing the power switch) or momentarily (by pressing the power switch at the bottom). Thanks to this, it can also be used to, for example, control warning lights with several different operating modes, so that one switch is used as the lamp's power button and the other to change the operating mode. In this way, all functions of the lighting can be used without further adjustment and operation is simple. The operating mode of the power switch can be changed by pressing down the main power switch in the middle of the panel, after which the desired button is held down for a moment (the panel clicks = the operating mode changes).  \u003c\/p\u003e\n\u003cp\u003eA total of 18 different picture stickers are supplied with the switch panel which can be used to mark different functions on the switches. With the help of stickers, the switches can be clearly marked, and the user does not have to memorize which button controls which lamp or function. The symbol on the switch panel shines clearly thanks to the backlight, so the panel is easy to use even in the dark. The switch amperage is 240W @12V and 480W @24V. The power on electrical devices that are on at the same time can therefore be a total of 240W (or 480W).\u003c\/p\u003e\n\u003cp\u003eThe Mini Dashboard Controller comes with a highly durable 3M adhesive, allowing the switch panel to be attached to virtually any surface. In addition to the decal mount, the Dashboard Controller can also be installed in the vehicle using a separate stand, thus obtaining a permanent installation by screwing the mount directly to the vehicle. By using both mounting methods, the switch becomes a neat part of the vehicle's interior, and the driver never has to look for the panel.\u003c\/p\u003e\n\u003cp\u003eContent\u003cbr\u003eSwitch panel\u003cbr\u003e3M self-adhesive mount\u003cbr\u003eDecal sheet for switch\u003cbr\u003eStand with screw mount\u003cbr\u003e3 x screws\u003cbr\u003eInstallation and connection instructions\u003cbr\u003eTechnical specification\u003c\/p\u003e\n\u003cp\u003eMake and model: Switch panel Purelux Mini Dashboard Controller\u003cbr\u003eArea of use: Operation and control of 4 electrical units from the same switch panel\u003cbr\u003eOperating voltage: 10-30V\u003cbr\u003ePower class: 240W @ 12V, 480W @ 24V\u003cbr\u003eMax current: 20A\u003cbr\u003eDimensions: 62 x 62 x 25 mm\u003cbr\u003eWeight: 110 g\u003cbr\u003eCable length: approx. 30 cm\u003cbr\u003eIncludes 18 marking decals\u003cbr\u003eApprovals: EMC: ECE: R10\u003cbr\u003eWarranty: 24 months\u003cbr\u003eQuick guide\u003cbr\u003eCoupling\u003c\/p\u003e\n\u003cp\u003eRed: Power (+)\u003cbr\u003eBlack: Ground (-)\u003cbr\u003eBlue: Output P1 (upper left corner)\u003cbr\u003eRed: Output P2 (upper right corner)\u003cbr\u003eGreen: Output P3 (lower left corner)\u003cbr\u003eWhite: Output P4 (lower right corner)\u003cbr\u003eSelection of button function\u003c\/p\u003e\n\u003cp\u003ePress On \/ Off\u003cbr\u003eHold \/ Release\u003cbr\u003eTo change the operating mode, turn off the power switch and press and hold the power button together with the desired button until you hear a clicking sound.\u003c\/p\u003e","brand":"Purelux","offers":[{"title":"Default Title","offer_id":50653474128210,"sku":"","price":69.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/2833\/9608\/files\/IMG_3961.jpg?v=1745709093"},{"product_id":"switch-panel-with-fuse-relay-box-4-gang-rgb-multi-colour-backlight-12v-24v","title":"Switch Panel with Fuse \u0026 Relay Box - 4 Gang - RGB Multi Colour Backlight - 12v\/24v","description":"\u003cp\u003eA very versatile, RGB-backlit switch panel for controlling 4 different devices from the same place. Excellent e.g. for controlling the lights of a work machine, truck or SUV.\u003c\/p\u003e\n\u003cp\u003eThe Purelux Multi-Switch Dashboard Controller is a very versatile and convenient switch panel for controlling four different electrical devices (lights, beacons, engine fan or even a seat heater). With the help of the switch panel, you can e.g. in the work machine, you can control the front, rear and side work lights as well as the beacon separately, and the switches for all lights are conveniently in the same place. The lights can be turned on and off individually, and with the switch in the middle, all devices installed behind the panel can be turned off at the same time. All lights connected to the switch panel (and other devices as well) can be turned on either steadily (i.e. turn the button on and off with another click), momentarily (the light turns on when the button is held down) or flashing.\u003c\/p\u003e\n\u003cp\u003eThe switch panel has an RGB backlight that automatically adjusts to the brightness of the environment, which can also be turned off by pressing the \"Mode\" switch once. A total of 45 different picture stickers and five black, self-cutting stickers for marking the switches are included. In this way, the switch intended for each different device or light can be marked to prevent confusion. Thanks to the backlight, the symbol on the switch shines clearly even in the dark.\u003c\/p\u003e\n\u003cp\u003eFrom the switch panel, all the lights connected behind it can be made to light up either steadily, momentarily (by pressing the button at the bottom) or flashing. The function can be changed by quickly pressing the Mode button in the middle of the panel twice, after which the led indicators above the switch start flashing. After that, press the switch whose function you want to change. This way, for example, a separate flasher relay is not needed to make the lights flash! In addition, the panel is equipped with a convenient memory function, i.e. it turns on the lights in the same mode that was used before turning off the power.\u003c\/p\u003e\n\u003cp\u003eNOTE! The current rating of the switch panel is 480W @12V and 960W @24V. The power of electrical devices that are on at the same time may therefore be a total of 480W (or 960W). Circuit 1 can withstand a maximum current of 30A, circuit 2 a maximum current of 20A, circuit 3 a maximum current of 10A and circuit 4 a maximum current of 5A. Each circuit has its own fuse in the control box.\u003c\/p\u003e\n\u003cp\u003eDelivery content\u003cbr\u003eSwitch panel (4 switches)\u003cbr\u003eFuse box\u003cbr\u003eResidual current protection (40A)\u003cbr\u003e4-pole cable\u003cbr\u003e2-pole cable\u003cbr\u003ePower cable\u003cbr\u003e2 different fixing irons for the switch panel\u003cbr\u003eFuse box fixing iron\u003cbr\u003e50 labeling stickers for labeling buttons\u003cbr\u003eScrew set\u003cbr\u003eTies\u003cbr\u003eInstructions for use\u003cbr\u003eSpecifications\u003cbr\u003eProduct: Switch panel Purelux Multi-Switch Dashboard Controller, 10-30V\u003cbr\u003ePurpose: Using 4 electrical devices from the same switch panel\u003cbr\u003eEnables e.g. using additional lights, side and rear work lights and the beacon panel separately\u003cbr\u003eOperating voltage: 10-30 V\u003cbr\u003ePower rating: 480W @ 12V, 960W @ 24V\u003cbr\u003eMaximum current: 40 A\u003cbr\u003eIncludes 50 marking stickers\u003cbr\u003eIP rating: IP65\u003cbr\u003eOperating temperature: -40 to +105°C\u003cbr\u003eApprovals: CE marked\u003cbr\u003eChange: Memory function in the panel\u003cbr\u003eWarranty: 12 months\u003cbr\u003eConnection instructions\u003cbr\u003ePower: Connect the main power cable (Red) from the vehicle's battery or other fixed power point to the residual current device, and from the residual current device to the fuse box to the attachment point marked in red. Connect the other end of the grounding cable (Black) e.g. to the vehicle frame or other fixed grounding point, and the other end to the grounding point marked in black in the fuse box.\u003c\/p\u003e\n\u003cp\u003eConnecting the switch panel: Connect one end of the supplied 4-pin cable to the switch panel and the other end to the marked plug in the fuse box.\u003c\/p\u003e\n\u003cp\u003eExcitation current: The fuse box can be supplied with excitation current according to the desired use: if you do not want the devices installed behind the switch to work without the vehicle running, it is recommended to connect the excitation current cable to, for example, a cigarette lighter or the bottom of the ignition switch. If again\u003cbr\u003eif you want the devices connected to the panel (lights, etc.) to be able to be used even when the vehicle is turned off, you should connect the excitation current directly to, for example, the positive terminal of the car's battery or another fixed power point. Connect the 2-pole plug of the excitation power cable to the fuse box.\u003c\/p\u003e\n\u003cp\u003eNote! The red LED indicator next to the fuse indicates if the fuse has blown.\u003c\/p\u003e\n\u003cp\u003eConnecting lights (or other electrical devices): Connect the desired lights to outputs 1-4 found in the fuse box. Note the maximum possible current of each circuit, and connect the device to be connected to a suitably powerful current output.\u003c\/p\u003e\n\u003cp\u003eValostore's tip: If the power of the lights\/devices exceeds the maximum power of the controller (480W @12V, 960W @24V), the controller can also be used to control the relay, in which case the current needed by the lights (or part of the lights) passes through the relay\/relay wiring harness, and only the excitation current comes from the controller. In this case, instead of the power cable of the light, only the excitation cable of the relay\/relay wiring harness is connected to the output (1-4) from the controller.\u003c\/p\u003e\n\u003cp\u003eIn this way, part of the lights can be connected behind your own relay wiring harness. In this case, the current of the lights passes through the relay, and these do not require power from the controller, and the controller only controls the excitation of the relay.\u003c\/p\u003e\n\u003cp\u003eAdditional features of the switch panel - in addition to continuous power, the switches can be programmed to work as a one-time flash button or a continuous flashing strobe function: To change the operating mode, follow these instructions: Step 1: Turn on the switch panel. Step 2: Press the “Mode” button twice quickly and the LED indicators above the switches will start flashing. Step 3: Press the switch whose function you want to change. Step 4: Test the operation. If the operating mode did not change, restart the switch panel and repeat steps 1-3.\u003c\/p\u003e","brand":"Purelux","offers":[{"title":"Default Title","offer_id":50653487989074,"sku":"19495","price":124.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/2833\/9608\/files\/IMG_40532.jpg?v=1745710342"},{"product_id":"purelux-panther-9-12-314lm-driving-light-amber-or-white-drl-amber-strobe","title":"Purelux Panther 9 Driving Light - 12,314Lm - Amber or White DRL - Amber Strobe","description":"\u003cp\u003eExceptionally stylish, powerful auxiliary light equipped with a wonderful combination beam and an R65-approved warning light. It also has two different power modes and a two-color parking light. The perfect lamp to tame the darkness! Measured light output 12314 lm, range 709 m @ 1 lux.\u003c\/p\u003e\n\u003cp\u003ePowerBoost® technology\u003cbr\u003eLong throwing yet wide light beam\u003cbr\u003eWarning light approved for road traffic\u003cbr\u003e12314 lumens, 709 meters (@ 1 lux)\u003cbr\u003eOptimal 5000K color temperature\u003cbr\u003eStylish two-color parking light\u003cbr\u003eFrameless Lexa polycarbonate lens\u003cbr\u003ePurelux Panther 9 is a shockingly powerful auxiliary light that shakes up the market of round driving lights with a fierce performance, one of the best combination light beams on the market, an R65-approved warning light function and a unique appearance. The light has two different power modes, i.e. it can be switched on either the more moderate power mode approved for road traffic or the PowerBoost® mode that releases unlimited light output. The innovative user interface switch integrated into the light allows you to change the power modes easily and quickly, even directly while driving, so there is no need to make any additional connections!\u003c\/p\u003e\n\u003cp\u003eIn PowerBoost® mode, the measured (in LightLab) light output of just one light is 12314 lumens, with a range of up to 709 meters (1 lux), and when two or more lights are installed side by side, in the darkness of the night the unnoticeable row of black panthers turns into a light phenomenon that signs the way ahead in an unprecedented way. The attention-grabbing design, stylish details and the orange or white parking light at the bottom of the light make the Panther 9 an eye-catching revelation, and thanks to the black color it fits neatly into any vehicle.\u003c\/p\u003e\n\u003cp\u003eTechnical specification\u003cbr\u003eBrand and model: Purelux Panther 9\u003cbr\u003ePurpose: As an additional light in cars \/ work machines\u003cbr\u003eOperating voltage: 9-36 V (DC)\u003cbr\u003eReference number: 25\u003cbr\u003eCalculated power: 210 W\u003cbr\u003ePower consumption measured by Valostore\u003cbr\u003ePurelux PowerBoost®: 8.125A @ 24V\u003cbr\u003eRoad mode: 1.79A @ 24V\u003cbr\u003eWarning light: 0.61A @ 24V\u003cbr\u003ePower measured by Valostore\u003cbr\u003ePurelux PowerBoost®: 195 W\u003cbr\u003eRoad traffic mode: 43 W\u003cbr\u003eWarning light: 14.7 W\u003cbr\u003eParking lights: 4.1 W\u003cbr\u003eLight output measured by Valostore: 12314 lm (Purelux PowerBoost®) \/ 3872 lm (Road traffic mode)\u003cbr\u003eRange measured by Valostore: 709 m @ 1 lux \/ 1418 m @ 0.25 lux (Purelux PowerBoost®)\u003cbr\u003eRange measured by Valostore: 387 m @ 1 lux \/ 774 m @ 0.25 lux (Traffic mode)\u003cbr\u003eRange with more light, measured (PowerBoost® \/ E-approved, @ 1 lux):\u003cbr\u003eWith two: 1003 m \/ 547 m (@ 1 lux)\u003cbr\u003eWith three: 1228 m \/ 670 m (@ 1 lux)\u003cbr\u003eWith four: 1418 m \/ 774 m (@ 1 lux)\u003cbr\u003eColor temperature stated by the manufacturer: 5000 K\u003cbr\u003eMeasured by Valostore: 5019 K\u003cbr\u003eMounting: Mounting leg\u003cbr\u003eConnector: DTP-2\u003cbr\u003eSeparate parking lights and warning light + wires\u003cbr\u003eCable length: approx. 100 cm\u003cbr\u003eDimensions: 225 x 200 x 77 mm (Width x Height x Depth)\u003cbr\u003eHeight with mounting foot: 214 mm\u003cbr\u003eWeight: 2470 g\u003cbr\u003eIP rating: IP69K\u003cbr\u003eApprovals: ECE R10, R148, R149, R65, CE, RoHS\u003cbr\u003eRoad traffic approval does not apply to the Purelux PowerBoost® mode\u003cbr\u003eOther: The light has a ready-made place for stabilizer\u003cbr\u003eWarranty: 36 months\u003cbr\u003eImporter: Handshake.fi\u003cbr\u003eInstallation guide\u003cbr\u003eCoupling\u003c\/p\u003e\n\u003cp\u003eDTP connector: Additional light\u003cbr\u003eYellow: Orange parking light\u003cbr\u003eWhite: White parking light\u003cbr\u003eGreen: Warning light (R65)\u003cbr\u003eGrey: Synchronizing the warning light \/ changing the operating mode of the warning light\u003cbr\u003eChanging the power mode with UI technology: The first time the lamp is used, it lights up in PowerBoost mode. To change the power mode, turn the light off, then turn the light on for two seconds, and turn the light off and on 2 times in 1.5 seconds to change the power mode. Repeat to change the power mode again.\u003c\/p\u003e\n\u003cp\u003eSynchronization and warning light functions:\u003c\/p\u003e\n\u003cp\u003eWarning light: Connect green wire to power (+)\u003cbr\u003eSynchronization: Synchronize multiple warning lights by connecting the gray wires together\u003cbr\u003eWarning light pattern: Connect the gray wire to power (+) for less than 1 second, the pattern will change\u003cbr\u003eReset: Connect the gray wire to power (+) for at least 3 seconds to return directly to the first pattern of the warning light\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\"Notorious Panther performance\"\u003cbr\u003eUnlike usual, there is no need to connect or disconnect any extra wire to activate the lamp's different power modes, instead switching between PowerBoost® and road traffic mode is possible using a unique switch integrated into the user interface. The power mode can therefore be changed easily and quickly, even while driving. See more below!\u003c\/p\u003e\n\u003cp\u003eNote! You can clearly see the difference between Purelux PowerBoost® and road traffic mode - PowerBoost® mode is significantly more efficient and should not be used when driving in normal road traffic, only off-road.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe light beam of the Panther 9 consists of a rectangular wide main beam, which is a perfect combination of both range and width. The light beam opens right away and illuminates the whole road from side to side, while the brighter main spot in the middle of the beam directs the light far ahead. In the vertical direction, the light beam is softly delimited, as usual from other lights of the Panther series, thanks to which the light is not lost in the sky and a ball of light does not form in front of the car. However, the height of the beam is optimized to be sufficient for hilly terrain and roof installations of heavy equipment.\u003c\/p\u003e\n\u003cp\u003eUnlike many other auxiliary lights on the market, the Panther 9 is equipped with an R65-approved orange warning light, which can be used e.g. in special transports, when the vehicle moves from the highway to a construction site or, for example, in traffic control. A bright, brilliant warning light will not go unnoticed by anyone, so the safety of those working on the vehicle can be guaranteed without separate warning lights. The warning light can be installed, for example, behind a separate switch, so that it can be used whenever necessary. The warning light has five different flashing functions, and in addition, the lights can be synchronized with each other, so that they flash at the same time and the overall appearance of the vehicle is uniform.\u003c\/p\u003e\n\u003cp\u003eIn addition to the precisely finished light beam, a feature that significantly improves the driving experience is the light's neutral color temperature of 5000 Kelvin. Neutral color temperature is optimal for road traffic, as it facilitates the observation of terrain shapes and obstacles and does not distort the color of the object. In addition, it dazzles less cool tones from e.g. snow cover or in fog and rain, and reduces the strain on the eyes. The 5000K color temperature also suits newer cars with LED or Xenon lights as standard, and brings the desired brightness and sharpness even alongside traditional halogen lights.\u003c\/p\u003e\n\u003cp\u003eThe appearance of Panther 9 differs from the usual, and its unique design, the orange or white parking light running spectacularly at the bottom of the lens, and the dark optics give the lamp a unique and street-credible overall look. The brazenly non-standard appearance, combined with the 9\" size and ferocious performance, make the Panther 9 an excellent addition to the equipment of heavy equipment and construction site vehicles as well as vans and SUVs. The lamp's exceptionally low reference number (25) allows several lamps to be installed in the same vehicle without affecting the car's own high beams need to be cut out of use, so this light cannon can also be installed in passenger cars!\u003c\/p\u003e\n\u003cp\u003e\"Purelux Panther series is made with uncompromising quality and top of the line performance. Every feature is finely tuned to fit any type of situation and vehicle. Don't hesitate, ride with the Panther!” - Purelux\u003c\/p\u003e\n\u003cp\u003eThe light is supplied with a mounting foot, and the installation is facilitated by the 2-pole DTP connector already in place in the lamp's power cord, as well as separate wires from the power cord for the parking lights, warning light, and warning light synchronization. Unlike many other additional lights of the same size, the Panther 9 also has a ready-made mounting hole for the upper support bar, which enables a sturdy installation. The wide operating voltage range (9-36V) enables installation in both 12V and 24V systems. The lamp is protected against radio interference in accordance with the ECE R10 standard.\u003c\/p\u003e","brand":"Purelux","offers":[{"title":"Default Title","offer_id":50657068253522,"sku":"","price":249.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/2833\/9608\/files\/IMG_3996.jpg?v=1745792868"},{"product_id":"purelux-panther-7-driving-light-7783lm-amber-or-white-drl","title":"Purelux Panther 7 Driving Light - 7783Lm - Amber or White DRL","description":"\u003cp\u003eExceptionally stylish, 7\" additional light with a wonderful combination light beam and two different power modes, which also includes a two-color parking light. The perfect light to tame the half-yearly darkness! Measured light output 7783 lm, range 648 m @ 1 lux.\u003c\/p\u003e\n\u003cp\u003ePowerBoost® technology\u003cbr\u003eA great, wide combination beam\u003cbr\u003eFirst choice for bow installations\u003cbr\u003e7783 lumens, 648 meters (@ 1 lux)\u003cbr\u003eOptimal 5000K color temperature\u003cbr\u003eStylish two-color parking light\u003cbr\u003eFrameless Lexa polycarbonate lens\u003cbr\u003eThe Purelux Panther 7 is a shockingly powerful and spectacular auxiliary light that shakes up the market of round auxiliary lights with a fierce performance, one of the best combination light beams on the market and a unique appearance. The light has two different power modes, i.e. it can be switched on either the more moderate power mode approved for road traffic or the PowerBoost® mode that releases unlimited light output. The innovative user interface integrated into the light allows you to change the power modes easily and quickly while driving, so there is no need to make any additional connections!\u003c\/p\u003e\n\u003cp\u003eIn PowerBoost® mode, the measured light output of just one light is 7,783 lumens and the range reaches up to 648 meters (1 lux), and when two or more lights are installed side by side, in the darkness of the night, the unnoticeable row of black panthers turns into a light phenomenon that signals the way ahead in an unprecedented way. The attention-grabbing design, stylish details and the orange or white parking light at the bottom of the light make the Panther 7 an eye-catching revelation, and thanks to the stylish black color, it fits neatly into any vehicle.\u003c\/p\u003e\n\u003cp\u003eSpecifications\u003cbr\u003eBrand and model: Purelux Panther 7\u003cbr\u003ePurpose: As an additional light in cars \/ work machines\u003cbr\u003eOperating voltage: 9-36 V (DC)\u003cbr\u003eReference number: 20\u003cbr\u003eCalculated power: 128 W\u003cbr\u003ePower consumption measured by Valostore\u003cbr\u003ePurelux PowerBoost®: 5.09A @ 24V\u003cbr\u003eRoad traffic mode: @ 24V\u003cbr\u003eWarning light: @ 24V\u003cbr\u003ePower measured by Valostore\u003cbr\u003ePurelux PowerBoost®: 122.1 W @ 24V\u003cbr\u003eRoad traffic mode: @ 24V\u003cbr\u003eParking lights: @ 24V\u003cbr\u003eLight output measured by Valostore: 7783 lm (Purelux PowerBoost®) \/ lm (Road traffic mode)\u003cbr\u003eRange measured by Valostore: 648 m @ 1 lux \/ 1296 m @ 0.25 lux (Purelux PowerBoost®)\u003cbr\u003eRange measured by Valostore: m @ 1 lux \/ m @ 0.25 lux (Traffic mode)\u003cbr\u003eRange with more light, measured (PowerBoost® \/ E-approved, @ 1 lux):\u003cbr\u003eWith two: 916 m \/ m (@ 1 lux)\u003cbr\u003eWith three: 1122 m \/ m (@ 1 lux)\u003cbr\u003eWith four: 1296 m \/ m (@ 1 lux)\u003cbr\u003eColor temperature stated by the manufacturer: 5000 K\u003cbr\u003eMeasured by Valostore: 4993 K\u003cbr\u003eMounting: Mounting leg\u003cbr\u003eConnector: DT-2\u003cbr\u003eThe parking lights + wires are separate\u003cbr\u003eCable length: approx. 100 cm\u003cbr\u003eDimensions: 178 x 158 x 61 mm (Width x Height x Depth)\u003cbr\u003eHeight with mounting leg: 169 mm\u003cbr\u003eWeight: 1160 g\u003cbr\u003eIP rating: IP69K\u003cbr\u003eApprovals: ECE R10, R148, R149, CE, RoHS\u003cbr\u003eRoad traffic approval does not apply to the Purelux PowerBoost® mode\u003cbr\u003eOther: The light has a ready place for the support iron\u003cbr\u003eWarranty: 36 months\u003cbr\u003eImporter: Handshake.fi\u003cbr\u003eInstallation guide\u003cbr\u003eCoupling\u003c\/p\u003e\n\u003cp\u003eDT2 connector: Additional light\u003cbr\u003eYellow: Orange parking light\u003cbr\u003eWhite: White parking light\u003c\/p\u003e\n\u003cp\u003e\"Notorious Panther performance\"\u003cbr\u003eUnlike usual, there is no need to connect or disconnect any extra wire to activate the lamp's different power modes, instead switching between PowerBoost® and road traffic mode is possible using a unique selection integrated into the user interface. The power mode can therefore be changed easily and quickly, even while driving.\u003c\/p\u003e\n\u003cp\u003eNote! You can clearly see the difference between Purelux PowerBoost® and road traffic mode - PowerBoost® mode is significantly more efficient and should not be used when driving in normal road traffic, only off-road.\u003c\/p\u003e\n\u003cp\u003eThe Panther 7's light beam consists of a rectangular wide main beam, which is a perfect combination of both range and width. The light beam opens right from the bow and illuminates the whole way from side to side, while the brighter main spot in the middle of the beam directs the light far ahead. In the vertical direction, the light beam is softly delimited, as usual from other lights of the Panther series, thanks to which the light is not lost in the sky and a ball of light does not form in front of the bow. However, the height of the cone is optimized to be sufficient for hilly terrain and roof installations of heavy equipment.\u003c\/p\u003e\n\u003cp\u003eIn addition to the precisely finished light beam, a feature that significantly improves the driving experience is the light's neutral color temperature of 5000 Kelvin. Neutral color temperature is optimal for road traffic, as it facilitates the observation of terrain shapes and obstacles and does not distort the color of the object. In addition, it dazzles, e.g. less cool tones from snow cover or in fog and rain, and reduces the strain on the eyes. The 5000K color temperature also suits newer cars with LED or Xenon lights as standard, and brings the desired brightness and sharpness even alongside traditional halogen lights.\u003c\/p\u003e\n\u003cp\u003eThe appearance of Panther 7 differs from the usual, and its unique design, the orange or white parking light running spectacularly at the bottom of the lens, and the dark optics give the lamp a unique look. The brazenly non-standard appearance combined with the 7\" size and ferocious performance make the Panther 7 an excellent choice for the front of ordinary cars, SUVs and vans. The light's low reference number (20) makes it possible to install several lights in the same vehicle without having to remove the car's own main lights.\u003c\/p\u003e\n\u003cp\u003e\"Purelux Panther series is made with uncompromising quality and top of the line performance. Every feature is finely tuned to fit any type of situation and vehicle. Don't hesitate, ride with the Panther!” - Purelux\u003c\/p\u003e\n\u003cp\u003eThe light is supplied with a mounting foot, and installation is facilitated by the 2-pole DT connector already in place in the light's power cord and the separate wires from the power cord to the parking lights. Unlike many other additional lights of the same size, the Panther 7 also has a ready-made mounting hole for the upper support bar, which enables a sturdy installation. The wide operating voltage range (9-36V) enables installation in both 12V and 24V systems. The lamp is protected against radio interference in accordance with the ECE R10 standard\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Purelux","offers":[{"title":"Default Title","offer_id":50657344749906,"sku":"","price":199.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/2833\/9608\/files\/IMG_4002.jpg?v=1745794901"},{"product_id":"purelux-panther-5-driving-light-6560lm-amber-or-white-drl","title":"Purelux Panther 5 Driving Light - 6560Lm - Amber or White DRL","description":"\u003cp\u003eA powerful additional light with a unique design, a compact 5\" body and a wide combination light beam, which also has two different power modes and a two-color parking light. The low reference number (12.5) makes it possible to install several lights in the same vehicle! Measured light output 6560 lm, range 472 m @ 1 lux.\u003c\/p\u003e\n\u003cp\u003eSpecifications\u003cbr\u003eBrand and model: Purelux Panther 5\u003cbr\u003ePurpose: As an additional light in cars \/ work machines\u003cbr\u003eOperating voltage: 9-36 V (DC)\u003cbr\u003eReference number: 12.5\u003cbr\u003eCalculated power: 90 W\u003cbr\u003ePower consumption measured by Valostore\u003cbr\u003ePurelux PowerBoost®: 3.18A @ 24V\u003cbr\u003eRoad mode: 1.125A @ 24V\u003cbr\u003eParking lights: 0.26A @ 24V\u003cbr\u003ePower measured by Valostore\u003cbr\u003ePurelux PowerBoost®: 76.4 W @ 24V\u003cbr\u003eRoad mode: 27W @ 24V\u003cbr\u003eParking lights: 6.2 W @ 24V\u003cbr\u003eLight output measured by Valostore: 6560 lm (Purelux PowerBoost®) \/ 2830 lm (Road traffic mode)\u003cbr\u003eRange measured by Valostore: 472 m @ 1 lux \/ 944 m @ 0.25 lux (Purelux PowerBoost®)\u003cbr\u003eRange measured by Valostore: 311 m @ 1 lux \/ 622 m @ 0.25 lux (Traffic mode)\u003cbr\u003eRange with more lights, measured (PowerBoost® \/ E-approved, @ 1 lux):\u003cbr\u003eWith two: 668 m \/ 440 m (@ 1 lux)\u003cbr\u003eWith three: 818 m \/ 539 m (@ 1 lux)\u003cbr\u003eWith four: 944 m \/ 622 m (@ 1 lux)\u003cbr\u003eWith six: 1156 m \/ 762 m (@ 1 lux)\u003cbr\u003eColor temperature stated by the manufacturer: 5000 K\u003cbr\u003eMeasured by Valostore: 4985 K\u003cbr\u003eMounting: Mounting leg\u003cbr\u003eConnector: DT2-2\u003cbr\u003eThe parking lights + wires are separate\u003cbr\u003eCable length: approx. 50 cm\u003cbr\u003eDimensions: 147 x 104 x 97 mm (Width x Height x Depth)\u003cbr\u003eHeight with mounting foot: 121 mm\u003cbr\u003eWeight: 1222 g\u003cbr\u003eIP rating: IP69K\u003cbr\u003eApprovals: ECE R10, R148, R149*, CISPR25 Class 3\u003cbr\u003e*Road traffic approval does not apply to the Purelux PowerBoost® mode\u003cbr\u003eOther: The light has a ready place for the support iron\u003cbr\u003eWarranty: 36 months\u003cbr\u003eImporter: Handshake.fi\u003cbr\u003eInstallation guide\u003cbr\u003eCoupling\u003c\/p\u003e\n\u003cp\u003eDT2 connector: Additional light connection (PowerBoost®)\u003cbr\u003eDT2 connector + Green: Power mode approved for road traffic\u003cbr\u003eYellow: Orange parking light\u003cbr\u003eWhite: White parking light\u003cbr\u003eWhen the additional light is connected using the DT-2 connector, it lights up in PowerBoost® mode. Power mode approved for road traffic can be switched on by connecting the black wire to ground and the green wire to power.\u003c\/p\u003e\n\u003cp\u003e\"Notorious Panther performance\"\u003cbr\u003e\"Purelux Panther series is made with uncompromising quality and top of the line performance. Every feature is finely tuned to fit any type of situation and vehicle. Don't hesitate, ride with the Panther!” - Purelux\u003c\/p\u003e\n\u003cp\u003eThe light is supplied with a mounting foot, and installation is facilitated by the 2-pole DT connector already in place in the light's power cord and the separate wires from the power cord to the parking lights. The complete sets come with ready-made support brackets that can be attached to the fixing bolt of the light mounting foot (the use of support brackets is not necessary, if the installation can otherwise be carried out securely), so they remain hidden and the end result is neat. The wide operating voltage range (9-36V) enables installation in both 12V and 24V systems. The lamp is protected against radio interference in accordance with the ECE R10 standard.\u003c\/p\u003e\n\u003cp\u003eThe light beam of the Panther 5 consists of a rectangular wide main beam, where the wide spot in the middle directs the light far ahead, up to almost half a kilometer. In the vertical direction, the light beam is softly delimited, as usual from other lights of the Panther series, thanks to which the light is not drowned in the sky and a dazzling ball of light does not form in front of the bow. However, the height of the light beam is optimized to be sufficient even for hilly terrain and ceiling installations.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eIn addition to the precisely finished light beam, a feature that significantly improves the driving experience is the light's neutral color temperature of 5000 Kelvin. Neutral color temperature is optimal for road traffic, as it facilitates the observation of terrain shapes and obstacles and does not distort the color of the object. In addition, it dazzles less cool tones from e.g. snow cover or in fog and rain, and reduces the strain on the eyes. The boldly non-standard appearance combined with the 5\" size and ferocious performance make the Panther 5 an excellent choice for ATVs, regular cars, SUVs and vans. The light's low reference number (12.5) allows several lights to be installed in the same vehicle without having to remove the car's own high beams.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Purelux","offers":[{"title":"Default Title","offer_id":50657766146386,"sku":"","price":129.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/2833\/9608\/files\/IMG_40072.jpg?v=1745796860"},{"product_id":"12-purelux-panther-led-light-bar-aero-s300-gen2-amber-or-white-drl","title":"12\" Purelux Panther LED Light Bar Aero S300 Gen2 - Amber or White DRL","description":"\u003cp\u003eSuper slim and aerodynamic led bar, equipped with e.g. with PowerBoost® technology and a wonderful combinated light pattern, which tame the darkness. There is also a dual-colored parking light! Measured light output 3930 lm, measured range 352 m @ 1 lux.\u003c\/p\u003e\n\u003cp\u003eTwo power modes (Purelux PowerBoost®)\u003cbr\u003e3930 lumens, 352 meters (@ 1 lux)\u003cbr\u003eA long-range combination beam\u003cbr\u003ePleasant 5000K color temperature\u003cbr\u003eAerodynamic and low structure\u003cbr\u003eStylish two-color parking light\u003cbr\u003eUnprecedented size-performance ratio\u003cbr\u003eFrameless Lexa polycarbonate lens\u003cbr\u003eEasy attachment with end or bottom brackets\u003cbr\u003ePurelux Panther Aero S300 Gen2 is a very compact and aerodynamically shaped additional light panel, which, in addition to a modern appearance, combines both a great size-power ratio and top features that improve the driving experience! The low body, finished with dark optics and frameless lens, Panther Aero S300 Gen2 is also equipped with a two-color parking light and two different power modes. The light can therefore be selected for use in either the limited power mode approved for road traffic or the Purelux PowerBoost® mode that releases full power, where the lamp offers a measured light output of up to 3930 lumens and a measured range of 352 meters @ 1 lux!\u003c\/p\u003e\n\u003cp\u003eFor a little light, the Purelux Panther Aero S300 Gen2 is quite capable, and due to its size, it can be installed discreetly, e.g. for grilles or to complete an already existing lighting system, for example in a truck. In addition, the light is perfect for ATVs, side-by-side racing games and even motorcycles as an additional light. Whether the installation target is a car or a van, a recreational vehicle or a truck, the Purelux Panther Aero S300 Gen2 will make your driving experience significantly better. A great choice for both professional and private driving!\u003c\/p\u003e\n\u003cp\u003eSpecifications\u003cbr\u003eBrand and model: Purelux Panther Aero S300 Gen2\u003cbr\u003ePurpose: As an additional light in cars \/ Off-Road vehicles \/ work machines\u003cbr\u003eLED: 9 x 6W\u003cbr\u003eOperating voltage: 9-36 V (DC)\u003cbr\u003eReference number: 17.5\u003cbr\u003eCalculated power: 54 W\u003cbr\u003ePower consumption measured by Valostore\u003cbr\u003ePurelux PowerBoost®: 4.5A @ 12V \/ 2A @ 24V\u003cbr\u003eRoad mode: 1.91A @ 12V \/ 0.91A @ 24V\u003cbr\u003ePower measured by Valostore\u003cbr\u003ePurelux PowerBoost®: 54W @ 12V \/ 48W @ 24V\u003cbr\u003eRoad mode: 23W @ 12V \/ 22W @ 24V\u003cbr\u003eLight output declared by the manufacturer: 3800 lm (Purelux PowerBoost®)\u003cbr\u003eMeasured 3930 lm (Purelux PowerBoost®)\u003cbr\u003eRange declared by the manufacturer: 366 m @ 1 lux (Purelux PowerBoost®) \/ 272 m @ 1 lux (Road traffic mode)\u003cbr\u003eMeasured 352 m @ 1 lux \/ 703 m @ 0.25 lux \/ (Purelux PowerBoost®)\u003cbr\u003eColor temperature stated by the manufacturer: 5000 K\u003cbr\u003eFastening: End legs, width-adjustable lower legs\u003cbr\u003eConnector: Deutsch DT-2\u003cbr\u003eThe parking lights + wires are separate\u003cbr\u003eCable length: 50 cm\u003cbr\u003eDimensions: 296 x 42 x 62.5 mm (Width x Height x Depth)\u003cbr\u003eHeight with end legs: 57 mm\u003cbr\u003eHeight with lower legs: 62 mm\u003cbr\u003eWeight: 900 g\u003cbr\u003eIP rating: IP68\/IP69K\u003cbr\u003eApprovals: CE, ECE R10, R7, R112*\u003cbr\u003e*Road traffic approval does not apply to PowerBoost® mode\u003c\/p\u003e","brand":"Purelux","offers":[{"title":"Default Title","offer_id":50657830699346,"sku":"","price":119.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/2833\/9608\/files\/IMG_40202.jpg?v=1745797641"},{"product_id":"purelux-panther-alpha-30-work-light-red-or-amber-parking-light","title":"Purelux Panther Alpha 30 Work Light - Red or Amber Parking Light","description":"\u003cp\u003eA series of work lights for challenging conditions, which includes e.g. combination beam inspired by auxiliary lights, two-color parking\/position light and two different color temperature options (4000K\/5000K). Exceptionally stylish design! Declared light output 2800 lm, IP69K rating.\u003c\/p\u003e\n\u003cp\u003eTechnical information\u003cbr\u003eBrand and model: Purelux Panther Alpha 30\u003cbr\u003ePurpose: As a work light in work machines, heavy equipment and cars\u003cbr\u003eOperating voltage: 9-36V\u003cbr\u003ePower consumption measured by Valostore\u003cbr\u003eWork light: 1.33A @ 24V\u003cbr\u003eParking light: 0.2A @ 24V\u003cbr\u003eTheoretical power declared by the manufacturer: 30 W\u003cbr\u003ePower measured by Valostore\u003cbr\u003eWork light: 32 W\u003cbr\u003eParking light: 5 W\u003cbr\u003eLight output stated by the manufacturer: 2800 lm\u003cbr\u003eMeasured by Valostore: 2586 lm\u003cbr\u003eRange measured by Valostore: 88 m @ 1 lux \/ 176 m @ 0.25 lux\u003cbr\u003eColor temperature stated by the manufacturer: 4000K \/ 5000K\u003cbr\u003eMeasured by Valostore: - \/ 5066 K\u003cbr\u003eMounting: Mounting base\u003cbr\u003eConnector: DT-4\u003cbr\u003eCable length: 50 cm\u003cbr\u003eDimensions: 153 x 45 x 69 mm (Width x Height x Depth)\u003cbr\u003eHeight with foot: 49 mm\u003cbr\u003eWeight: 454 g\u003cbr\u003eIP rating: IP69K\u003cbr\u003eOperating temperature: -40°C to +60°C\u003cbr\u003eApprovals: EMC: ECE: R10, R23, CISPR25 Class 3, CE, RoHS\u003c\/p\u003e\n\u003cp\u003ePurelux Panther Alpha is a spectacular new generation work light series designed for challenging conditions. Alpha lamps bring something completely new to the work light market with a unique design, a wide light pattern inspired by additional lights and a two-color parking\/position light. In addition, the lights are available in two different color temperatures, which enables the creation of individual lighting solutions. The low-profile Panther Alpha 30 produces a light output of 2,800 lm, and thanks to advanced reflector technology, its light pattern is horizontally wide, but vertically softly delimited, so that the light is directed maximally to the working area, but the glare of the surrounding area of the illuminated area has been significantly reduced. Because of its size, the Panther Alpha 30 is an excellent choice for e.g. trucks and lorries as a chassis and rear work light, as a skirt light for work machines and for inconspicuous installations in vans and SUVs. Panther Alpha 30 is equipped with R23, i.e. reversing light approval.\u003c\/p\u003e\n\u003cp\u003eThe Panther Alpha series lights are available in both 4000K and 5000K color temperature versions, which enables the creation of optimal lighting: the neutral 5000 kelvin color temperature is the best choice for general machine lighting, but the slightly warmer 4000K color temperature works better, e.g. in snowy or dusty conditions, because the warmer color tone reduces glare in e.g. snow or dust. Glare is also prevented by the light beam used in the Alpha series: the light pattern limited at the top and bottom ensures that the light is not directed at unnecessary snowfall or dust or fog floating in the air, but that the light is directed only at the work object. The lights can also be easily directed so that the glare of others working in the vicinity can be minimized.\u003c\/p\u003e\n\u003cp\u003eIn addition to excellent lighting properties, Panther Alpha lights are also extremely stylish, and their unique design language is completely different from other work lights on the market. The great design combined with the dark profile and the orange or red parking light at the bottom of the frameless lens make the Alpha lights a unique addition to any vehicle. In addition, these lamps have been created to withstand challenging conditions, as evidenced by e.g. their highest possible tightness rating (IP69K), a frame made of durable aluminum and a lens made of practically unbreakable polycarbonate. The lights also have an intelligent temperature regulation system, which prevents overheating even during long working days and guarantees safe and worry-free working even during seasonal work. Wide operating voltage (9-36V) enables installation in both 12V and 24V systems.\u003c\/p\u003e\n\u003cp\u003eThe lights of the Panther Alpha series have a DT-4 connector already integrated into the power cord, which makes installation easier. The counterpart of the connector is also supplied. Panther Alpha 30 is protected against radio interference according to R10 and CISPR25 Class 3 classifications.\u003c\/p\u003e","brand":"Purelux","offers":[{"title":"Default Title","offer_id":50657862582610,"sku":"","price":64.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/2833\/9608\/files\/IMG_40382.jpg?v=1745798519"},{"product_id":"purelux-panther-alpha-20-work-light-red-or-amber-parking-light","title":"Purelux Panther Alpha 20 Work Light - Red or Amber Parking Light","description":"\u003cp\u003eA series of work lights for challenging conditions, which includes e.g. a combination light beam inspired by auxiliary lights, a two-color parking\/marker light and a neutral 5000K color temperature. Exceptionally stylish design! Declared light output 1500 lm, IP69K rating.\u003c\/p\u003e\n\u003cp\u003eSpecifications\u003cbr\u003eBrand and model: Purelux Panther Alpha 20\u003cbr\u003ePurpose: As a work light in work machines, heavy equipment and cars\u003cbr\u003eOperating voltage: 9-36V\u003cbr\u003eWork light: 0.80A @ 24V\u003cbr\u003eParking light: 0.225A @ 24V\u003cbr\u003eTheoretical power declared by the manufacturer: 20 W\u003cbr\u003eWork light: 19.3 W\u003cbr\u003eParking light: 5.4 W\u003cbr\u003eLight output stated by the manufacturer: 1500 lm\u003cbr\u003eRange measured by Valostore: 56 m @ 1 lux \/ 112 m @ 0.25 lux\u003cbr\u003eManufacturer's stated color temperature: 5000K\u003cbr\u003eMeasured 5049K\u003cbr\u003eMounting: Mounting base\u003cbr\u003eConnector: DT-4\u003cbr\u003eCable length: 50 cm\u003cbr\u003eDimensions: 96 x 45 x 50 mm (Width x Height x Depth)\u003cbr\u003eHeight with foot: 71 mm\u003cbr\u003eWeight: 320 g\u003cbr\u003eIP rating: IP69K\u003cbr\u003eOperating temperature: -40°C to +60°C\u003cbr\u003eApprovals: EMC: ECE: R10, R23, R149, CE, RoHS\u003c\/p\u003e\n\u003cp\u003ePurelux Panther Alpha is a spectacular new generation work light series designed for challenging conditions. Alpha lamps bring something completely new to the work light market with a unique design, a wide light pattern inspired by auxiliary lights and a two-color parking\/extreme light. The very compact and low body Panther Alpha 20 produces a light output of 1500 lumens, and thanks to the advanced reflector technology, its light pattern is horizontally wide, but vertically softly delimited, so that the light is directed maximally to the working area, but the glare of the lighting area's surroundings has been significantly reduced. Because of its size, the Panther Alpha 20 is an excellent choice for e.g. trucks and lorries as a chassis and rear work light, as a skirt light for work machines and for inconspicuous installations in vans and SUVs. Panther Alpha 20 is equipped with R23, i.e. reversing light approval.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePanther Alpha 20 is equipped with a neutral 5000K color temperature, which is the optimal choice for general lighting. The neutral color temperature reproduces the colors and shapes of the environment in a natural way and works better than cold tones in bad weather conditions, such as fog and rain. When the above features are combined with the light pattern limited by the upper and lower edges of the Alpha series, the glare caused by bad conditions can also be significantly reduced, because the light is not directed at unnecessary snowfall or fog floating in the air, but the light is directed only at the working object. The lights can also be easily directed in such a way that the glare of others working in the vicinity can be minimized. Clever mounting stand can be attacled also on top of the light, which allows light to be installed \"hanging\".\u003c\/p\u003e\n\u003cp\u003eIn addition to excellent lighting properties, Panther Alpha lights are also extremely stylish, and their unique design language is completely different from other work lights on the market. The great design combined with the dark profile and the orange or red parking light at the bottom of the frameless lens make the Alpha lights a unique addition to any vehicle. In addition, these lamps have been created to withstand challenging conditions, as evidenced by e.g. their highest possible tightness rating (IP69K), a frame made of durable aluminum and a lens made of practically unbreakable polycarbonate. The lights also have an intelligent temperature regulation system, which prevents overheating even during long working days and guarantees safe and worry-free working even during seasonal work. Wide operating voltage (9-36V) enables installation in both 12V and 24V systems.\u003c\/p\u003e\n\u003cp\u003eThe lights of the Panther Alpha series have a DT-4 connector already integrated into the power cord, which makes installation easier. The counterpart of the connector is also supplied. Panther Alpha 20 is protected against radio interference according to R10 classifications.\u003c\/p\u003e","brand":"Purelux","offers":[{"title":"Default Title","offer_id":50657865236818,"sku":null,"price":59.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/2833\/9608\/files\/IMG_4028_3.jpg?v=1745799367"},{"product_id":"wire-hider-rubber-conduit-with-3m-tape","title":"Wire Hider \/ Rubber Conduit with 3m tape","description":"\u003cp\u003eHandy rubber conduit for e.g. the tidy transportation of additional and work light cables, for example from the roof of the vehicle to the engine room. Attaches to the mounting surface with sturdy 3M tape. Several gutters can be installed in a row and they can be shortened by cutting. The length of the channel is 150 cm, the max. of the installed cable. diameter 12 mm.\u003c\/p\u003e\n\u003cp\u003eTechnical information\u003cbr\u003eProduct: Purelux Wire Hider\u003cbr\u003ePurpose: Neat installation of cables\u003cbr\u003eLength: 150 cm\u003cbr\u003eMaterial: Rubber\u003cbr\u003eCord max. diameter: 12 mm\u003cbr\u003e3M adhesive tape on the back\u003c\/p\u003e","brand":"Purelux","offers":[{"title":"Default Title","offer_id":50675090784594,"sku":"","price":14.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/2833\/9608\/files\/IMG_40403.jpg?v=1745962672"},{"product_id":"one-light-three-colours-white-red-amber-functions-purelux-spectre-12x-led-marker-bar-or-surface-mount","title":"One Light, Three Colours - White, Red \u0026 Amber Functions - Purelux Spectre 12X LED Marker - Bar or Surface Mount","description":"\u003cp\u003eVery stylish and low (only 12 mm deep) position light for marking the outermost points of the vehicle. Choose between white, red or orange light color, so you can install the same light in the front, back or side! Operating voltage 10-30V.\u003c\/p\u003e\n\u003cp\u003eThe Purelux Spectre 12X is a light that fits perfectly as a position light \/ side marker. Thanks to the fact that it can be used with white, red or orange light, it is very versatile and suitable for a variety of applications. The simple connection via a separate cable means that the same lamp is suitable for mounting virtually anywhere on your vehicle because you can easily choose which color you want the Spectre 12X to shine in. The Purelux Spectre 12X is especially suitable for heavy vehicles, work machines, trucks and vans, or other vehicles where lighting is the focus! The black circuit board that can be glimpsed through the clear lens makes it blend in nicely even when it's not lit. The modern look and elegant design as well as the good distribution of the light make the Purelux Spectre 12X perfect for those who want to draw attention to you on the roads!\u003c\/p\u003e\n\u003cp\u003ePurelux Spectre 12X is E-approved according to the ECE R148 standard, which includes approval for, for example, flashing lights, brake lights, turn signals, side markers and position lights.\u003c\/p\u003e\n\u003cp\u003eThe Spectre 12X is dust and waterproof according to protection class IP67, so no weather and traffic conditions limit the use of this extreme light. It is not only completely dustproof, but also resistant to temporary immersion, which means that it can easily withstand heavy rain or a vehicle wash. The lens is made of very durable polycarbonate.\u003c\/p\u003e\n\u003cp\u003eThe low and compact design enables spectacular surface installation in virtually any vehicle, and the wide operating voltage range (10-30 V) enables installation in both 12V and 24V systems. The lamp comes with an installation background and two screws for attachment.\u003c\/p\u003e\n\u003cp\u003eContent\u003cbr\u003ePurelux Spectre 12X\u003cbr\u003eSealing plate\u003cbr\u003eMounting screws\u003cbr\u003eTechnical specification\u003c\/p\u003e\n\u003cp\u003eBrand and model: Purelux Spectre 12X\u003cbr\u003eArea of use: As side markers\/position lights in vehicles or work machines\u003cbr\u003eOperating voltage: 10-30 V (DC)\u003cbr\u003eLED: 12 x 0.5W\u003cbr\u003eLight color: White, orange or red\u003cbr\u003ePower: 6 W\u003cbr\u003eDimensions: 102 x 25 x 12 mm (W x H x D)\u003cbr\u003eCC dimensions: 85 mm (measurement between attachment points)\u003cbr\u003ePower cable length: 500 mm\u003cbr\u003eWeight: 40 g\u003cbr\u003eProtection class: IP67\u003cbr\u003eApprovals: SAE, ECE R148\u003cbr\u003eWarranty: 24 months\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCoupling\u003cbr\u003eRed: Red Light (+)\u003cbr\u003eYellow: Orange light (+)\u003cbr\u003eWhite: White light (+)\u003cbr\u003eBlack: Ground (-)\u003c\/p\u003e","brand":"Purelux","offers":[{"title":"Default Title","offer_id":50743684464978,"sku":"","price":24.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/2833\/9608\/files\/14CB8D7A-E9D0-454D-BA7A-5458EA10F5CB.jpg?v=1746830874"},{"product_id":"purelux-7200-round-7-driving-light-8800lm-amber-or-white-drl","title":"Purelux 7200 Round 7\" Driving Light - 8800Lm - Amber or White DRL","description":"\u003cp\u003eA very high-performance round auxiliary light which top features include e.g. Purelux PowerBoost® technology, exceptionally good combination beam and two-color (orange and white) parking light! Measured light output 6562 lm, measured range 468 m @ 1 lux.\u003c\/p\u003e\n\u003cp\u003eNew, better version:\u003cbr\u003eImproved powder coating\u003cbr\u003eTwo power modes (Purelux PowerBoost®)\u003cbr\u003eA long-range combination beam\u003cbr\u003e6562 lumens, 468 meters (@ 1 lux)\u003cbr\u003ePleasant 5000K color temperature\u003cbr\u003eStylish two-color parking light\u003cbr\u003eFrameless Lexa polycarbonate lens\u003cbr\u003eThin and graceful structure\u003cbr\u003ePurelux 7200 is a high-performance round 7\" auxiliary light, which is at the top of its size class both with its light output and other top features. This light is equipped with, for example, a two-color parking light (white and orange), a neutral 5000K color temperature, and two different power modes, which can be switched between by just pressing a button! The light can be switched to a more moderate power mode approved for road traffic or PowerBoost® mode, which removes the limiters and releases the full measured light output of 6562 lumens. Powerful LEDs combined with advanced lens and reflector technology create a high-quality combination light beam, thanks to which the 7200's light power is enough to illuminate the road section ahead measured up to 468 meters (1 @ lux) while the reflectors also direct the light evenly from side to side.\u003c\/p\u003e\n\u003cp\u003eUnlike usual, no extra cord needs to be connected or disconnected to activate the lamp's different power modes, but switching between PowerBoost® and road mode is unprecedentedly easy by pressing the button at the end of the lamp. The power mode that was last used remains in the lamp's \"memory\", and thus you don't have to worry, e.g. when driving on the road, that the lamp always turns on at maximum power when the power is turned off in between and the car starts moving again.\u003c\/p\u003e\n\u003cp\u003eNote! You can clearly see the difference between Purelux PowerBoost™ and road traffic mode - PowerBoost® mode is significantly more efficient and should not be used when driving in normal road traffic, only off-road.\u003c\/p\u003e\n\u003cp\u003eUnlike many other round auxiliary lights, the light beam of the 7200 is more plump than usual, and the light is spread evenly from the bright, laterally wide main beam across the entire width of the road. In the height direction, the beam is softly delineated, so that stray light does not escape unnecessarily towards the sky or focus disturbingly on the road in front of the vehicle. Therefore the 7200 does not create a bright ball of light in front of the bow that disturbs the driver's perception. Thanks to its excellent beam, the 7200 doesn't need additional lights with a wider or narrower light pattern to support it, and with the power of two (or even more if wanted) 7200s, even the widest road section can be illuminated in such a way that forest animals pushing out of the ditch onto the roadway and cyclists pedaling towards the distance on a small hill can be spotted in good time. With two or more lights, the beams can also be directed either parallel or on top of each other, so the light can be directed exactly where it is most needed.\u003c\/p\u003e\n\u003cp\u003eDue to its size, the 7200 fits perfectly in passenger cars and vans, but thanks to its tremendous light output and PowerBoost® feature, it is also well suited for Off-Road vehicles, which are used to drive on the unlit off-road trails of the North, where the darkness that swallows all the light around it is disciplined. The button for changing the power mode is placed within easy reach at the back of the lamp, and it works as a mechanical switch, meaning that the last used setting always remains in the lamp's memory.\u003c\/p\u003e\n\u003cp\u003eTo maximize visibility, the 7200 is equipped with a neutral color temperature of 5000 Kelvin, which is optimized specifically for road traffic. The neutral color temperature facilitates e.g. the observation of terrain shapes and possible obstacles, animals and traffic signs, and it does not reflect light back into the driver's eyes from nature's white snow cover or false colors of the environment. In addition, the neutral color temperature works better than cool shades in bad weather conditions, and it helps to keep your eyes sharp in the seemingly endless darkness. The 5000K color temperature fits nicely with newer cars with standard LED or Xenon lights, and brings the desired brightness and sharpness even alongside the own lights of older vehicles equipped with halogen lights.\u003c\/p\u003e\n\u003cp\u003eThe appearance of the 7200 is modern, and its contemporary dark optics and black profile allow for a stylish and impressive installation. The orange or white parking light running through the center of the light and the frameless lens that prevents the accumulation of snow and ice give the light a wonderful look whether it is on or off. In addition to the stylish appearance, the 7200 is also very durable, which is confirmed by e.g. with a practically unbreakable polycarbonate lens, a body made of powder-coated and UV-protected aluminum, and the highest possible tightness rating (IP68\/IP69K), the lamp is excellently resistant to year-round conditions and corrosion, and the UV protection does not allow the body to fade.\u003c\/p\u003e\n\u003cp\u003eUnlike several other round additional lights, the body of the 7200 is considerably thinner in the depth direction, so the light is easy to install e.g. for hard-to-shape bumpers. In addition, the light installation leg is placed directly under the light, i.e. it does not increase the installation width, which enables the lights to be installed completely side by side if necessary. The installation is facilitated by the sturdy mounting leg supplied with the light, the DTP connector already in place in the power cord, and the ready-made plus wires from the power cord to the parking lights. The wide operating voltage range (9-36 V) enables installation in both 12V and 24V systems. The lamp is protected against radio interference in accordance with the ECE R10 standard. Two-year (24 months) warranty!\u003c\/p\u003e\n\u003cp\u003eTechnical information\u003c\/p\u003e\n\u003cp\u003eBrand and model: Purelux 7200\u003cbr\u003ePurpose: As an additional light in cars \/ work machines\u003cbr\u003eLED: 6 x 10W + 8 x 6W\u003cbr\u003eOperating voltage: 9-36 V (DC)\u003cbr\u003eReference number: 25\u003cbr\u003eCalculated power: 108 W\u003cbr\u003ePower consumption measured by Valostore\u003cbr\u003ePurelux PowerBoost®: 4.35A @ 24V\u003cbr\u003eRoad mode: 2.30A @ 24V\u003cbr\u003ePower measured by Valostore\u003cbr\u003ePurelux PowerBoost®: 104.6 W\u003cbr\u003eRoad mode: 55.4 W\u003cbr\u003eLight output declared by the manufacturer: 8800 lm (Purelux PowerBoost®)\u003cbr\u003eRange declared by the manufacturer: 465 m @ 1 lux (Purelux PowerBoost®) \/ 327 m @ 1 lux (Road traffic mode)\u003cbr\u003eMeasured distances for multiple lights (powerboost \/ traffic, 1 lux):\u003cbr\u003e2 lights: 662 m \/ 526 m\u003cbr\u003e3 lights: 811 m \/ 644 m\u003cbr\u003e4 lights: 936 m \/ 744 m\u003cbr\u003eColor temperature stated by the manufacturer: 5000 K\u003cbr\u003eMounting: Mounting leg\u003cbr\u003eConnector: DTP-2\u003cbr\u003eThe parking lights + wires are separate\u003cbr\u003eCable length: approx. 50 cm\u003cbr\u003eDimensions: 185 x 180 x 64.5 mm (Width x Height x Depth)\u003cbr\u003eHeight with mounting leg: 185 mm\u003cbr\u003eWeight: 1400 g\u003cbr\u003eIP rating: IP68\/IP69K\u003cbr\u003eApprovals: ECE R7, R10, R112*\u003cbr\u003e*Road traffic approval does not apply to the Purelux PowerBoost® mode\u003cbr\u003eOther: The light has a ready-made place for stabilizer\u003c\/p\u003e\n\u003cp\u003eBasic delivery content (1 pc)\u003cbr\u003ePurelux 7200\u003cbr\u003eMounting leg\u003cbr\u003ePower cord with DTP-2 connector\u003cbr\u003eConnection and installation instructions (EN\/FI\/SE\/NO\/DK)\u003c\/p\u003e","brand":"Purelux","offers":[{"title":"Default Title","offer_id":50866988876114,"sku":"","price":120.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/2833\/9608\/files\/IMG_4645.jpg?v=1748644336"},{"product_id":"pureluk-scene-light-2400lumen","title":"Purelux Compact Scene Light - 2400Lumen","description":"\u003cp\u003eWork lighting for side mounting, equipped with an extremely wide and evenly luminous light pattern. Provides a pleasant even light to the surrounding environment and the immediate vicinity of the vehicle, starting from its side line. Declared luminous flux 2400 lumens.\u003c\/p\u003e\n\u003cp\u003ePurelux Scene 19W is a work light for mounting on the sides of the vehicle. Scene has a very wide light pattern, and is very well suited for mounting on the side of, for example, caravans, cars, vans, trucks and work vehicles. The work lighting is indispensable in situations where light is needed next to or on the side of the vehicle. Unlike traditional wide beam work lights, Scene is designed to more efficiently illuminate the immediate vicinity of the vehicle, as its lens is mounted at a 45 degree angle to the frame. While a traditional work light directs the light straight ahead and leaves the side of the vehicle in darkness, the Scene 2400 lumens diffuses light flux evenly and widely into the surrounding environment starting from the side line of the vehicle. This makes Scene an exceptionally good choice for providing light for work that takes place close to the vehicle.\u003c\/p\u003e\n\u003cp\u003eThanks to the wide light pattern, only one lamp per side can be enough for smaller vehicles. With the help of several lamps, however, the width and strength of the light can be further increased, so that the surroundings around a large vehicle can be illuminated for tasks that require great precision and care. Scene's dark profile allows for a neat installation, and its compact and elegant fixture means it blends well with any vehicle's appearance.\u003c\/p\u003e\n\u003cp\u003eStage can be permanently mounted in virtually any vehicle using the mounting screws on both sides of the lamp. The mounts are made of stainless steel, the lens is made of durable polycarbonate, and the frame is made of an aluminum alloy that is highly resistant to corrosion, wear and the changing weather conditions in the Nordics. The stage is also completely protected against dust, water and even hot steam according to the highest protection class (IP68\/IP69K). Thus, it easily copes with all the challenges that come its way, regardless of whether it concerns heat and humidity, freezing water rain or extremely biting frost. Thanks to the wide operating voltage (10-30V), Scene can be installed in both 12V and 24V systems. Two year (24 month) warranty!\u003c\/p\u003e\n\u003cp\u003eContent\u003cbr\u003ePurelux Scene 19W\u003cbr\u003eMounting screws\u003cbr\u003eInstallation seals\u003cbr\u003eConnection and installation instructions (EN, FI, SE, NO)\u003cbr\u003eTechnical specification\u003c\/p\u003e\n\u003cp\u003eBrand and model: Work lighting Purelux Scene 19W\u003cbr\u003eArea of use: As work lighting in cars\/work machines\u003cbr\u003eLED: 52 x 1W Cree LED\u003cbr\u003eOperating voltage: 10-30V\u003cbr\u003eManufacturer's reported current consumption: 1.54A @ 12V \/ 0.8A @ 24V\u003cbr\u003eManufacturer's reported power: 19W\u003cbr\u003eManufacturer's reported luminous flux: 2400 lm\u003cbr\u003eManufacturer's reported color temperature: 6000K\u003cbr\u003eContact: No contact, straight wires\u003cbr\u003eCable length: approx. 50 cm\u003cbr\u003eDimensions: 150 x 47 x 39.5 mm\u003cbr\u003eProtection class: IP68\/IP69K\u003cbr\u003eApprovals: CE, ROHS\u003cbr\u003eWarranty: 24 months\u003c\/p\u003e","brand":"Purelux","offers":[{"title":"Default Title","offer_id":50866994479442,"sku":"","price":34.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/2833\/9608\/files\/IMG_4647.jpg?v=1748646255"},{"product_id":"pureluk-terrain-black-slim-flood-lightbar-2880lumen","title":"Purelux Terrain Black Slim Flood Lightbar - 2880Lumen","description":"\u003cp\u003eVery stylish and compact (height 44 mm), 30W LED work light with dark optics. Wide light pattern and 2880 lm light output. Comfortable 5700K color temperature. 9-32V\u003c\/p\u003e\n\u003cp\u003ePurelux Terrain Black Slim Flood 30W is a top-class LED work light designed for challenging conditions. The model with a wide beam is at its best in situations where you want to illuminate the areas around a work machine or, for example, an SUV as widely and evenly as possible. Despite its small size, the Terrain Black Slim Flood offers an impressive 2880 lm light output and a wide illuminated range of 73 m (@ 1lux), which are the absolute top of its size class. Due to its slender and particularly low (only 44 mm high) body, the Terrain Black Slim works brilliantly even in tight installation spaces, and the modern, dark reflector optics ensure that the lamp's appearance matches even the most modern vehicles. The high-quality, impact- and weather-resistant aluminum body combined with a practically unbreakable polycarbonate lens ensure that the lamp is at home in tough work conditions despite its small size.\u003c\/p\u003e\n\u003cp\u003eUnlike traditional work lights, the Terrain Black Slim series has a lens that is adapted to the frame in such a way that it practically comes to the level of the frame in the front, and there is no longer a \"threshold\" on the edges of the lens that collects snow, sleet, sand and dust. In addition, a new type of reflector technology has reduced the glare of the work light, as the LEDs are directed from the top of the lamp to the reflector. The lamp is suitable for both 12V and 24V systems. The pleasant, neutral 5700K color temperature ensures that the level of alertness remains good and the lighting does not strain the eyes even during extended periods of work. Mounting accessories are included in the package.\u003c\/p\u003e\n\u003cp\u003eDelivery content\u003cbr\u003ePurelux Terrain Black Slim Flood 30W, Wide\u003cbr\u003eMounting foot with accessories\u003cbr\u003ePower cord with DT-2 connector\u003cbr\u003eSpecifications\u003cbr\u003eBrand and model: Purelux Terrain Black Slim Flood\u003cbr\u003eIntended use: As a work light in cars \/ work machines\u003cbr\u003eLED: 6 x 5W OSRAM\u003cbr\u003eOperating voltage: 9-32 V\u003cbr\u003eCurrent consumption measured by Valostore: 1.3A @ 24V\u003cbr\u003eRated power: 30 W\u003cbr\u003eMeasured by the light bulb: 31.3 W\u003cbr\u003eTheoretical light output: 2880 lm\u003cbr\u003eManufacturer's stated range: 73 m @ 1 lux\u003cbr\u003eLight tower measured: 129 m @ 0.25 lux \/ 64 m @ 1 lux\u003cbr\u003eManufacturer's stated color temperature: 5700 K\u003cbr\u003eMounting: Mounting foot\u003cbr\u003eConnector: Deutsch DT2\u003cbr\u003eCable length: approx. 50 cm\u003cbr\u003eDimensions: 157 x 44 x 60 mm (Width\/Height\/Depth)\u003cbr\u003eWeight: 492g\u003cbr\u003eIP rating: IP68\u003cbr\u003eApprovals: CE, RoHS, R10\u003cbr\u003eWarranty: 24 months\u003c\/p\u003e","brand":"Purelux","offers":[{"title":"Default Title","offer_id":50866997494098,"sku":"8717","price":34.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/2833\/9608\/files\/IMG_4650.jpg?v=1748646605"},{"product_id":"21-purelux-panther-led-light-bar-aero-s540-gen2-amber-or-white-drl","title":"21\" Purelux Panther LED Light Bar Aero S540 Gen2 - Amber or White DRL","description":"\u003cp\u003eSuper slim and aerodynamic led bar, equipped with e.g. with two power modes and a wonderful combinated light pattern. There is also a dual-color parking light! Measured light output 8151 lm, measured range 479 m @ 1 lux.\u003c\/p\u003e\n\u003cp\u003eTwo power modes (Purelux PowerBoost®)\u003cbr\u003eLong-lasting combination wedge\u003cbr\u003e8151 lumens, 479 meters (@ 1 lux)\u003cbr\u003ePleasant 5000K colour temperature\u003cbr\u003eAerodynamic and low-profile design\u003cbr\u003eStylish bi-colour parking light\u003cbr\u003eFrameless Lexan polycarbonate lens\u003cbr\u003eEasy attachment with head or foot mounts\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe Purelux Panther Aero S540 Gen2 is an aerodynamically designed auxiliary light that represents the most popular size of auxiliary light panels in a stylish way. This light combines a modern look with an excellent power-to-size ratio, which together make it one of the best single-row auxiliary lights available. Externally, the panel is understatedly stylish with its dark optics, low-profile design, frameless lens and two-colour parking light (orange and white), but internally it hides an impressive performance for its size. Aero S540:offers two different power modes, meaning it can be set to either a road-legal limited power mode or a full power mode.or the Purelux PowerBoost® mode, which unlocks the power and boosts the light output to 8151 lumens with a measured range of 479 metres @ 1 lux.\u003c\/p\u003e\n\u003cp\u003e\"Notorious Panther performance\"\u003cbr\u003eUnlike usual, there is no need to connect or disconnect any extra wires to activate the different power modes of the luminaire, but switching to PowerBoost®- and road mode with unprecedented ease at the touch of a button on the top of the luminaire. The last active power mode is stored in the \"memory\" of the lamp, so you don't need to change the power mode, e.g. for a road test. In road use, you don't have to worry about the lamp always switching on at maximum power when you switch off the power in between and start the car again.\u003c\/p\u003e\n\u003cp\u003eNote! The difference between Purelux PowerBoost® and road mode is clearly visible in use - PowerBoost® mode is much more powerful and should not be used in normal road driving, only off-road.\u003c\/p\u003e\n\u003cp\u003eThe Panther Aero S540 headlamp consists of a rectangular wide main beam, which is the perfect combination of range and width. Thanks to its curved design, the panel spreads light laterally over a very wide area, effectively illuminating roadsides, ditches and wooded areas from the front. In the vertical direction, the beam is softly delimited, making it optimal for bow installations in particular. However, despite the vertically limited beam, there is still enough light for driving on hilly terrain and for roof-mounted applications.\u003c\/p\u003e\n\u003cp\u003eThe difference between the curved and the straight Panther Aero is the beam: both models have a sufficient beam to illuminate the entire road from side to side, but the curved panel has a 50% wider main beam, which means that the area effectively illuminated is wider in the curved model. Unlike the other panels in the Panther series, the 54 cm wide lights have a slightly wider total beam in the straight model than in the curved model, purely because there is more lateral diffuse light in the straight panel. So if you are looking for a light that maximizes the effective illuminated area, the curved panel is the better choice, and if you want to maximize the beam spread, the straight panel is better. The curved model also has a straighter beam from the top and bottom, making it a slightly better choice for really low installations.\u003c\/p\u003e\n\u003cp\u003eApart from the carefully finished beam, another feature that significantly improves the driving experience is the lamp's neutral 5000 kelvin colour temperature. This neutral colour temperature is optimal for road traffic, as it facilitates the perception of terrain and obstacles, for example, and does not reflect the blinding brightness of natural white snow cover into the driver's eyes or distort the colours of the object being pointed at. In addition, the neutral colour temperature works better than cooler shades in poor weather conditions and helps to keep the eye sharp in the seemingly endless darkness. The 5000K colour temperature also works well with newer cars with LED or Xenon lights as standard.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThe Panther Aero S540's aerodynamic design, sleek black profile, dark optics and a stunning orange or white parking light at the bottom of the light make it a sophisticated and modern addition to any vehicle. In addition to its spectacular appearance and stunning lighting characteristics, the luminaire is also extremely durable, as demonstrated by its highest possible IP69K waterproof rating. The body is made of powder-coated aluminium, which is treated with a special coating that provides excellent protection against oxidation, the sun's harmful UV rays, varying weather conditions and dirt. The lens of the lamp is made of impact-resistant, high quality Lexan polycarbonate, which resists the inevitable stone chips and branch scratches of driving. The front of the light is perfectly flat, meaning there is no frame around the lens to collect snow, ice or dirt.\u003c\/p\u003e\n\u003cp\u003e\"The Purelux Panther series is made with uncompromised quality and top of the line performance. Every feature is finely tuned to fit any type of situation and vehicle. Don't hesitate, ride with the Panther!\" - Purelux\u003c\/p\u003e\n\u003cp\u003eThe light is supplied with both traditional headrests and width-adjustable rail brackets underneath the light, making it easy to mount the light in different locations. Connection is made easy by the 2-pole DT connector included in the power cable and the separate positive wires for parking lights. The wide operating voltage range (9-36V) allows connection to both 12V and 24V systems, and the light's very moderate reference value (25) allows for easy installation.virtually any standard light without disabling the original lights! In addition, the lamp is radio interference immunity according to ECE R10 standard. Two-year (24 months) warranty!\u003c\/p\u003e\n\u003cp\u003eTechnical specifications\u003cbr\u003eMake and model: Purelux Panther Aero S540\u003cbr\u003ePurpose: As an auxiliary light in cars \/ Off-Road vehicles \/ Work vehicles\u003cbr\u003eLED: 18 x 6W\u003cbr\u003eOperating voltage: 9-36 V (DC)\u003cbr\u003eReference number: 25\u003cbr\u003eRated power: 108 W\u003cbr\u003ePower consumption measured by the luminaire\u003cbr\u003ePurelux PowerBoost®: 10.41A @ 12V \/ 4.12A @ 24V\u003cbr\u003eRoad mode: 2.91A @ 12V \/ 1.29A @ 24V\u003cbr\u003ePower measured by the photometer\u003cbr\u003ePurelux PowerBoost®: 125 W @ 12V \/ 99 W @ 24V\u003cbr\u003eRoad mode: 35 W @ 12V \/ 31 W @ 24V\u003cbr\u003eManufacturer's declared light output: 7500 lm (Purelux PowerBoost®)\u003cbr\u003eMeasured by photometer: 8151 lm (Purelux PowerBoost®)\u003cbr\u003eLamp measured: 3241 lm (Road mode)\u003cbr\u003eRange measured by the luminaire: 479 m @ 1 lux \/ 958 m @ 0.25 lux \/ (Purelux PowerBoost®)\u003cbr\u003eRange measured by the photocell: 303 m @ 1 lux \/ 606 m @ 0.25 lux (Road mode)\u003cbr\u003eManufacturer's stated colour temperature: 5000 K\u003cbr\u003eMeasured by the photometer: 5050 K\u003cbr\u003eMounting: end feet, width adjustable lower feet\u003cbr\u003eConnector: Deutsch DT-2\u003cbr\u003eParking light + wires separately\u003cbr\u003eCable length: 50 cm\u003cbr\u003eDimensions: 540 x 42 x 62.5 mm (Width x Height x Depth)\u003cbr\u003eHeight with end legs: 57 mm\u003cbr\u003eHeight with lower legs: 62 mm\u003cbr\u003eWeight: 1500 g\u003cbr\u003eIP rating: IP68\/IP69K\u003cbr\u003eApprovals: CE, ECE R10, R148, R149*\u003cbr\u003e* Roadworthiness approval does not apply to PowerBoost® mode\u003cbr\u003eWarranty: 24 months\u003c\/p\u003e","brand":"Purelux","offers":[{"title":"Default Title","offer_id":50867017187666,"sku":"","price":159.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/2833\/9608\/files\/IMG_4664.jpg?v=1748647641"},{"product_id":"30-purelux-panther-led-light-bar-aero-s800-gen2-amber-or-white-drl","title":"30\" Purelux Panther LED Light Bar Aero S800 Gen2 - Amber or White DRL","description":"\u003cp\u003eSuper low and aerodynamic led bar, equipped with e.g. With PowerBoost® technology and a wonderful combinated light pattern which tame the endless darkness. There is also a dual-color parking light! Measured light output 12361 lm, measured range 550 m @ 1 lux.\u003c\/p\u003e\n\u003cp\u003eTwo power modes (Purelux PowerBoost®)\u003cbr\u003eA long-range combination beam\u003cbr\u003ePleasant 5000K color temperature\u003cbr\u003eAerodynamic and low structure\u003c\/p\u003e\n\u003cp\u003eStylish dual-color parking light\u003cbr\u003eUnprecedented size-performance ratio\u003cbr\u003eEdgeless Lexa polycarbonate lens\u003cbr\u003eEasy installation with side- or rail brackets\u003cbr\u003ePurelux Panther Aero S800 is an led bar with a low and aerodynamic design that, in addition to its modern appearance, combines optimal size-to-power ratio and top-notch performance, enhancing the driving experience! Panther Aero S800 boasts a sleek profile, and its contemporary look is realized thanks to its frameless frame and dark aesthetics. All the Panther series light bars come equipped with dual-color parking lights and, most importantly, Purelux PowerBoost® technology. This means the led bar can be activated in either the restricted E-marked power mode or the PowerBoost mode. The unrestricted PowerBoost® mode surpasses the E-mark standard, delivering a measured light output of 12,361 lumens with a measured range of 550 meters at 1 lux.\u003c\/p\u003e\n\u003cp\u003ePanther Aero S800 provides an ideal light pattern for navigating the challenging dark roads of the Nordic region, offering both long-range illumination and broad coverage for lighting up the road edges. The light pattern is softly delineated vertically, ensuring light is directed precisely where needed. This also allows for installation closer to the road surface. Despite the vertical limitation, the light pattern maintains adequate height to illuminate uneven terrain and avoid sharp shadows. Panther's balanced and combined light pattern enhances driving safety by extending the driver's reaction time to detect obstacles through larger illuminated areas.\u003c\/p\u003e\n\u003cp\u003ePurelux PowerBoost® - Most auxiliary lights sold today come with what is known as an E-marking. This signifies that the auxiliary lights must be power-limited to meet the traffic approval requirements in certain European countries. These regulations may not apply to every country; some countries might have special exceptions. To comply with these regulations, manufacturers produce auxiliary lights with E-markings, enabling them to be sold throughout the entire European market. Consequently, the output is limited in nearly all additional lights. However, by activating the PowerBoost® mode, you can bypass the E-marking and unleash the full potential of the auxiliary lights when the approval is not needed, in for example offroad or rally uses.\u003c\/p\u003e\n\u003cp\u003ePurelux Panther Aero S800 is an led bar designed to excel in the most demanding conditions of the northern regions, ready to tackle extreme situations as routine. Its size allows for discreet and stylish installation both under the license plate and on the roof, suitable for passenger cars and heavy equipment. With its PowerBoost mode, the led bar is also suitable for larger off-road vehicles and work machinery that require extra power. Regardless of the vehicle type, Panther Aero S800 enhances the driving experience and boosts road safety, making it an excellent choice for both professional and private driving.\u003c\/p\u003e\n\u003cp\u003eThe 5000K color temperature has been optimized for the challenging Nordic conditions, ensuring a comfortable driving experience even in situations like night driving or snowy landscapes. The balanced color temperature makes it easier to observe terrain shapes and contours without straining the eyes during long drives. Additionally, a 5000 Kelvin color temperature is better suited than cooler color temperatures for adverse weather conditions like fog and rain. The 5000K color temperature also complements newer vehicles equipped with LED or Xenon headlights\u003c\/p\u003e\n\u003cp\u003eUnlike usual, no extra cord needs to be connected or disconnected to activate the lamp's different power modes, but switching between PowerBoost® and road mode is unprecedentedly easy by pressing the button at the end of the lamp. The last used power mode remains in the lamp's \"memory\", and thus there is no need, for example, in road traffic use, to ensure that the lamp always turns on at maximum power, when the power is turned off in between and the car starts moving again.\u003c\/p\u003e\n\u003cp\u003eNOTE! The difference between PowerBoost® and road traffic mode is clearly noticeable in use - PowerBoost® is significantly more efficient. PowerBoost® is designed for off-road use.\u003c\/p\u003e\n\u003cp\u003e\"Notorious Panther performance\"\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\"Purelux Panther series is made with uncompromising quality and top of the line performance. Every feature is finely tuned to fit any type of situation and vehicle. Don't hesitate, ride with the Panther!” - Purelux\u003c\/p\u003e\n\u003cp\u003eThe bar's edgeless lens is crafted from UV-protective and virtually unbreakable polycarbonate, making it resistant to both stone chips and scratches from branches. This edgeless design also prevents the accumulation of snow, ice, or dirt, ensuring that the lens remains clean even when driving in adverse weather conditions.\u003c\/p\u003e\n\u003cp\u003eFurthermore, the fixture itself is optimized for rugged use, thanks to its powder-coated and UV-protected aluminum construction. This helps it withstand scratches, fading, and other harsh conditions, while also providing excellent resistance to corrosion. The led bar boasts an IP68\/IP69K protection rating, showcasing its durability and compact structure. With its sleek appearance and parking lights that can shine in either white or orange, the led bar is truly irresistible, a visual delight! Perhaps even the market's most attractive LED light bar?\u003c\/p\u003e\n\u003cp\u003eThe led bar comes with both traditional side mounts and width-adjustable beam mounts underneath the light, offering numerous installation possibilities. Installation is made easy with the 2-pole DTP connector already pre-installed on the led bar's power cable, and its wide operating voltage range (9-32 V) allows for installation in both 12V and 24V systems. The bar's reference number (17.5) permits installation alongside nearly all standard headlights without rendering the original ones unusable. Additionally, the led bar is protected against radio interference as per the ECE R10 standard. It comes with a two-year (24 months) warranty!\u003c\/p\u003e\n\u003cp\u003eTechnical specification\u003c\/p\u003e\n\u003cp\u003eBrand and model: Purelux Panther Aero S800\u003cbr\u003eArea of use: As an additional light in cars \/ Off-Road vehicles \/ work machines\u003cbr\u003eLED: 27 x 6W\u003cbr\u003eOperating voltage: 9-36 V (DC)\u003cbr\u003eReference number: 50\u003cbr\u003eEstimated power: 162 W\u003cbr\u003ePower consumption measured by Valostore\u003cbr\u003ePurelux PowerBoost®: 15.9A @ 12V \/ 6.20A @ 24V\u003cbr\u003eStandard: 6.16A @ 12V \/ 2.75A @ 24V\u003cbr\u003ePower measured by Valostore\u003cbr\u003ePurelux PowerBoost®: 191 W @ 12V \/ 149 W @ 24V\u003cbr\u003eStandard: 74W @ 12V \/ 66W @ 24V\u003cbr\u003eLight output stated by the manufacturer: 11000 lm (Purelux PowerBoost®)\u003cbr\u003eRange stated by the manufacturer: 598 m @ 1 lux (Purelux PowerBoost®) \/ 468 m @ 1 lux (Standard)\u003cbr\u003eColor temperature stated by the manufacturer: 5000 K\u003cbr\u003eMounting: Via side bracket or rail brackets - included\u003cbr\u003eConnector: Deutsch DTP-2\u003cbr\u003eSeparate wires for parking lights, no connector\u003cbr\u003eCable length: 50 cm\u003cbr\u003eDimensions: 783 x 42 x 62.5 mm (Width x Height x Depth)\u003cbr\u003eHeight with end legs: 57 mm\u003cbr\u003eHeight with lower legs: 62 mm\u003cbr\u003eWeight: 2250 g\u003cbr\u003eIP-rating: IP68\/IP69K\u003cbr\u003eApprovals: CE, ECE R10, R7, R112*\u003cbr\u003e*Road traffic approval does not apply to PowerBoost® mode\u003cbr\u003eWarranty: 24 months\u003c\/p\u003e\n\u003cp\u003eBasic delivery content\u003cbr\u003ePurelux Panther Aero S800\u003cbr\u003e2 x Width-adjustable rail mounts\u003cbr\u003e2 x Traditional side mounts\u003cbr\u003ePower cable with connector\u003cbr\u003eConnection and installation instructions (FI\/SE\/NO\/DK)\u003c\/p\u003e","brand":"Purelux","offers":[{"title":"Default Title","offer_id":50867018170706,"sku":null,"price":239.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/2833\/9608\/files\/IMG_4664.jpg?v=1748647641"},{"product_id":"22-purelux-flash-s560-white-or-amber-drl-strobe-function","title":"22\" Purelux Flash S560 - White or Amber DRL - Strobe Function","description":"\u003cp\u003eCombined led bar and flash light with dark optics and position light in two colors. Luminous flux 5000 lumens, range 400 m (@ 1 lux)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThe Purelux Flash S560 is an extremely stylish addition to the Purelux popular Flash series, now as a traditional led bar but also as a flash light bar. The extra light's 40 high-quality Osram 5W LEDs provide a pleasant amount of light - as extra light, the Purelux Flash S560 delivers a luminous flux of 5,000 lumens. The high-performance light flux combined with the carefully implemented and state-of-the-art reflector technology provides excellent visibility both at the edges of the road and with a fine range. The measured range of the Purelux Flash S560 is 400 meters (@ 1 lux). In addition, a set of 10 LEDs is integrated into the Flash S560 which can be set to function as either position light or flash light. The position light can shine either in an elegant yellow-orange or ECE R7-approved white glow. The ECE R65-approved flash light can be switched on, for example, when working on the road. The flash light's most important function is to alert those moving nearby to ensure the safety of both workers, road users and other people moving in the area. The Purelux Flash S560 offers a multitude of functions that ensure both driving and work safety!\u003c\/p\u003e\n\u003cp\u003ePurelux Flash S560 dark optics in two rows, the elegant design and a frameless \"no edge\" lens form a very elegant and stylish option that ensures a spectacular installation on any vehicle. Thanks to a frameless lens, the additional light remains high performing even in poor weather conditions and difficult terrain. Like many other led bars, there is also no \"threshold\" where dirt can collect. In addition, the lens is made of UV-protected and basically unbreakable polycarbonate. The color temperature of 5700K is pleasant to the eyes even in, for example, snow-covered landscapes.\u003c\/p\u003e\n\u003cp\u003eAs a result of the slim construction, the reflectors have also been completely redesigned. Unlike traditional led bars, the LEDs are directed towards the reflectors at the front of the luminaire, from where the curved reflector technology directs the light exactly where it is needed most. This solution reduces unnecessary stray light and thus also disturbances and glare caused by the additional lights, since the diodes themselves are not directly visible. In addition, the reflectors create an optimal beam for traffic use: the reflectors in the center direct the light far ahead with a focused beam, while the diffuse reflectors on both sides form an even and wide beam that illuminates the edges of the road.\u003c\/p\u003e\n\u003cp\u003eDespite double rows of diodes, the construction is low and slim, which enables discreet mounting. The compact design combined with the stylish design means that the led bar fits in nicely regardless of which car you mount it on. Likewise, there are suitable mounts regardless of car model. The Purelux Flash series is IP68 \/ IP69 rated and thus dust and waterproof. so you don't have to worry about the durability of the led bar while using it.\u003c\/p\u003e\n\u003cp\u003eNote! The auxiliary light's power cable comes without a connector. In the complete package (1 pc - complete package \/ 1 pc - complete package with recessed mounting) a suitable relay kit with DT2 contact is included which facilitates the installation of the additional light. Connection to parking lights and indicators is done manually.\u003c\/p\u003e\n\u003cp\u003eTechnical specification\u003c\/p\u003e\n\u003cp\u003eBrand and model: Purelux Flash S560\u003cbr\u003eArea of use: Additional light, flash light or parking\/position light for cars\/work machines\u003cbr\u003eLED: 40 x 5W Osram\u003cbr\u003eOperating voltage: 10-30 V\u003cbr\u003eManufacturer's reported current consumption: 6.86A @ 12V \/ 3.46A @ 24V\u003cbr\u003eEstimated power: 200 W\u003cbr\u003eManufacturer's reported power: 83.04 W\u003cbr\u003eManufacturer's reported luminous flux:\u003cbr\u003eTheoretical: 16800 lm\u003cbr\u003ePerformance: 4617 lm\u003cbr\u003eManufacturer's reported range:\u003cbr\u003e400 m @ 1 lux\u003cbr\u003e800 m @ 0.25 lux\u003cbr\u003eManufacturer's reported color temperature: 5700 K\u003cbr\u003eMounting: End leg, adjustable mounting rail\u003cbr\u003eConnector: Cable only, no connector\u003cbr\u003eCable length: approx. 50 cm\u003cbr\u003eDimensions: 561 x 70 x 67 mm (Width x Height x Depth)\u003cbr\u003eWeight: 2500 g\u003cbr\u003eProtection class: IP68\u003cbr\u003eCertifications: CE, RoHS, ECE R10, R7 (Parking lights), R112, R65 (Flash lights)\u003cbr\u003eWarranty: 24 months\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCoupling\u003cbr\u003eRed: Extra light (+)\u003cbr\u003eBlack: (-)\u003cbr\u003eGreen: Flash light (+)\u003cbr\u003eYellow: Yellow-orange parking light (+)\u003cbr\u003eGrey: White parking light (+)\u003c\/p\u003e","brand":"Purelux","offers":[{"title":"Default Title","offer_id":50867081871698,"sku":"","price":199.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/2833\/9608\/files\/IMG_4669.jpg?v=1748649946"},{"product_id":"20-purelux-black-x-slim-led-light-bar-s520-gen3-amber-or-white-drl","title":"20\" Purelux Black X-Slim LED Light Bar S520 Gen3 - Amber or White DRL","description":"\u003cp\u003eA stylish auxiliary light panel with a slim and low body (height 40 mm), two-color dynamic parking light and two different power modes. Measured light output 7075 lm, measured range 545 m @ 1 lux.\u003c\/p\u003e\n\u003cp\u003ePurelux Black X-Slim S520 Gen3 is part of its manufacturer's updated Black X-Slim auxiliary light series, which brings top quality to an affordable price range. The S520 Gen3 has the familiar two different power modes from the previous version, a wide combination beam and, of course, a stylish appearance and  slim body. As a novelty, the light's two-color (orange or white) parking light has been updated to be dynamic, and switching between power modes has been made even easier. Black X-Slim S520 is now even more stylish and at the same time more user-friendly! Thanks to two different power modes, the panel can be used with a unique selection integrated into the user interface (see more below) to switch on either the more moderate power mode approved for road traffic, or the more powerful PowerBoost® mode designed for off-road use. Already in the power mode approved for road traffic, the S520 Gen3 offers measured light output almost twice as much as the previous model (4079 lm), and when the PowerBoost® mode is switched on, the light output measured from the panel rises to up to 7075 lumens, with a measured range of 545 meters @ 1 lux.\u003c\/p\u003e\n\u003cp\u003eNote! You can clearly see the difference between Purelux PowerBoost® and road traffic mode - PowerBoost® mode is significantly more efficient and should not be used when driving in normal road traffic, only off-road.\u003c\/p\u003e\n\u003cp\u003eThe beam of the S520 Gen3 combines elements optimized for road traffic: in the middle of the light pattern there is a clear, long-range so-called main spot, i.e. a bright, far-reaching main beam, and in addition, a wide beam expands laterally from both sides to illuminate the road from the side to the side right from the bow. The light beam is shaped flat with renewed reflectors, so that the light is not wasted in front of the bow or on the tops of the trees. The biggest difference between the curved and straight body models is the width of the light beam: the curved body spreads the light beam horizontally wide, and the central main beam is twice as wide as the straight model. Correspondingly, in the direct version, the entire light output of the main spotlight is directed straight ahead, so that the range of the light can be maximized. When comparing cones, it is therefore recommended to choose a curved version when looking for a wide cone and improving overall visibility. If the car's own lights illuminate the first approx. 50-100 meters well and you want to invest more in range, the correct choice is the direct model. The color temperature of the panel is 5700 Kelvin. Due to its size, the S520 Gen3 is an excellent choice, e.g. for the front of a passenger car, for a traditional shield holder installation or, for example, embedded in the air intake.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe light has a black frame and dark optics, which are already evident in the name, which give the panel an elegant and modern look. Dark optics have also been introduced to the parking light, thanks to which the parking light bar running along the lower edge of the lens stands out from the light only when it is on, so the light is stylish both when switched on and off. The frames of the panels of the Black X-Slim series are made of powder-coated and durable aluminum alloy and the lenses of virtually unbreakable polycarbonate, and the lights are completely protected against water and dust according to the IP69K classification. The frameless front part of the lights prevents the accumulation of snow, ice and dirt in front of the lens, thanks to which the light beam is not obscured as easily as with additional lights equipped with a frame.\u003c\/p\u003e\n\u003cp\u003eInstallation is easy by using the DT-2 connector on the power cord of the light, and the width-adjustable lower legs and end legs that come with the package provide plenty of mounting options. Wide operating voltage (9-32V) enables installation in both 12V and 24V systems. The lamp is protected against radio interference according to the ECE R10 standard. Two-year (24 months) warranty!\u003c\/p\u003e\n\u003cp\u003eBasic delivery content\u003cbr\u003ePurelux Black X-Slim S520 Gen3\u003cbr\u003e2 x Width-adjustable lower legs\u003cbr\u003e2 x End feet\u003cbr\u003ePower cable counterpart\u003cbr\u003eConnection and installation instructions (FI\/SE\/NO\/DK\/EN)\u003c\/p\u003e\n\u003cp\u003eSpecifications\u003cbr\u003eBrand and model: Purelux Black X-Slim S520 Gen3\u003cbr\u003ePurpose: As an additional light in cars \/ Off-Road vehicles \/ work machines\u003cbr\u003eLED: Osram\u003cbr\u003eOperating voltage: 9-32 V\u003cbr\u003eReference number: 50\u003cbr\u003eCalculated power: 105 W\u003cbr\u003ePurelux PowerBoost®: 7.36A @ 12V \/ 3.68A @ 24V\u003cbr\u003eRoad mode: 4.24A @ 12V \/ 2.12A @ 24V\u003cbr\u003ePurelux PowerBoost®: 88.3 W @ 24V\u003cbr\u003eRoad mode: 50.9 W @ 24V\u003cbr\u003eLight output declared by the manufacturer: 8820 lm (Purelux PowerBoost®)\u003cbr\u003ePurelux PowerBoost®: 545 m @ 1 lux \/ 1090 m @ 0.25 lux\u003cbr\u003eRoad traffic mode: 410 m @ 1 lux \/ 820 m @ 0.25 lux\u003cbr\u003eColor temperature stated by the manufacturer: 5700 K\u003cbr\u003eFastening: End legs, width-adjustable lower legs\u003cbr\u003eConnector: Deutch DT-2\u003cbr\u003eThe parking lights + wires are separate\u003cbr\u003eCable length: 50 cm\u003cbr\u003eDimensions: 522 x 40 x 54 mm (Width x Height x Depth)\u003cbr\u003eHeight with end legs: 49 mm\u003cbr\u003eHeight with lower legs: 51 mm\u003cbr\u003eWeight: 1360 g\u003cbr\u003eIP rating: IP69K\u003cbr\u003eApprovals: ECE: R10, R148, R149*\u003cbr\u003e*Road traffic approval does not apply to PowerBoost® mode\u003cbr\u003eWarranty: 24 months\u003c\/p\u003e","brand":"Purelux","offers":[{"title":"Default Title","offer_id":50871804756306,"sku":"","price":129.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/2833\/9608\/files\/IMG_4675.jpg?v=1748736043"},{"product_id":"31-purelux-black-x-slim-led-light-bar-s800-gen3-amber-or-white-drl","title":"31\" Purelux Black X-Slim LED Light Bar S800 Gen3 - Amber or White DRL","description":"\u003cp\u003eA stylish auxiliary light panel with a slim and low body (height 40 mm), two-color dynamic parking light and two different power modes. Measured light output 10707 lm, measured range 564 m @ 1 lux.\u003c\/p\u003e\n\u003cp\u003ePurelux Black X-Slim S800 Gen3 is part of its manufacturer's updated Black X-Slim auxiliary light series, which brings top quality to an affordable price range. The S800 Gen3 has the familiar two different power modes from the previous version, a wide combination beam and, of course, a stylish appearance and a really graceful body. As a novelty, the light's two-color (orange or white) parking light has been updated to be dynamic, and switching between power modes has been made even easier. Black X-Slim S800 is now even more stylish and at the same time more user-friendly! Thanks to two different power modes, the panel can be used with a unique selection integrated into the user interface (see more below) to switch on either the more moderate power mode approved for road traffic, or the more powerful PowerBoost® mode designed for off-road use. Already in the power mode approved for road traffic, the S800 Gen3 offers significantly more light output than the previous model, and when the PowerBoost® mode is activated, the light output measured from the panel increases to up to 10707 lumens, with a measured range of an impressive 564 meters @ 1 lux.\u003c\/p\u003e\n\u003cp\u003eNote! You can clearly see the difference between Purelux PowerBoost® and road traffic mode - PowerBoost® mode is significantly more efficient and should not be used when driving in normal road traffic, only off-road.\u003c\/p\u003e\n\u003cp\u003eThe beam of the S800 Gen3 combines elements optimized for road traffic: in the middle of the light pattern there is a clear, long-range so-called main spot, i.e. a bright, far-reaching main beam, in addition to which a wide beam expands laterally from both sides to illuminate the road from side to side right from the bow. The light beam is shaped flat with renewed reflectors, so that the light is not wasted in front of the bow or on the tops of the trees. The biggest difference between the curved and straight body models is the width of the light beam: the curved body spreads the light beam horizontally wide, and the central main beam is twice as wide as the straight model. Correspondingly, in the direct version, the entire light output of the main spot is directed straight ahead, so that the range of the light can be maximized. When comparing cones, it is therefore recommended to choose a curved version when looking for a wide cone and improving overall visibility. If the car's own lights illuminate the first approx. 50-100 meters well and you want to invest more in the range, the straight model is the right choice. The color temperature of the panel is 5700 Kelvin. Due to its size, the S800 Gen3 is the best choice for the front of larger vehicles, either in a traditional shield rack installation or embedded in the air intake.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe light has a black frame and dark optics, which is already evident in the name, which give the panel an elegant and modern look. Dark optics have also been introduced to the parking light, thanks to which the parking light beam running along the lower edge of the lens stands out from the light only when it is on, so the light is stylish both when switched on and off. The frames of the Black X-Slim series panels are made of powder-coated and durable aluminum alloy and the lenses of virtually unbreakable polycarbonate, and the lights are also completely protected against water and dust according to the IP69K classification. The frameless front part of the lights prevents the accumulation of snow, ice and dirt in front of the lens, thanks to which the light beam is not obscured as easily as with additional lights equipped with a frame.\u003c\/p\u003e\n\u003cp\u003eInstallation is easy by using the DTP-2 connector on the power cord of the light, and the width-adjustable lower legs and end legs that come with the package provide plenty of mounting options. Wide operating voltage (9-32V) enables installation in both 12V and 24V systems. The lamp is protected against radio interference according to the ECE R10 standard. Two-year (24 months) warranty!\u003c\/p\u003e\n\u003cp\u003eBasic delivery content\u003cbr\u003ePurelux Black X-Slim S800 Gen3\u003cbr\u003e2 x Width-adjustable lower legs\u003cbr\u003e2 x End feet\u003cbr\u003ePower cable counterpart\u003cbr\u003eConnection and installation instructions (FI\/SE\/NO\/DK\/EN)\u003c\/p\u003e\n\u003cp\u003eSpecifications\u003cbr\u003eBrand and model: Purelux Black X-Slim S800 Gen3\u003cbr\u003ePurpose: As an additional light in cars \/ Off-Road vehicles \/ work machines\u003cbr\u003eLED: Osram\u003cbr\u003eOperating voltage: 9-32 V\u003cbr\u003eReference number: 50\u003cbr\u003eCalculated power: 165 W\u003cbr\u003ePower consumption measured by Valostore\u003cbr\u003ePurelux PowerBoost®: 11.75A @ 12V \/ 5.875A @ 24V\u003cbr\u003eRoad mode: 6.8A @ 12V \/ 3.4A @ 24V\u003cbr\u003ePurelux PowerBoost®: 141 W @ 24V\u003cbr\u003eRoad mode: 81.6 W @ 24V\u003cbr\u003eLight output declared by the manufacturer: 13860 lm (Purelux PowerBoost®)\u003cbr\u003ePurelux PowerBoost®: 564 m @ 1 lux \/ 1128 lm @ 0.25 lux\u003cbr\u003eRoad traffic condition: 428 m @ 1 lux \/ 856 m @ 0.25 lux\u003cbr\u003eColor temperature stated by the manufacturer: 5700 K\u003cbr\u003eFastening: End legs, width-adjustable lower legs\u003cbr\u003eConnector: DTP-2\u003cbr\u003eThe parking lights + wires are separate\u003cbr\u003eCable length: 50 cm\u003cbr\u003eDimensions: 798 x 40 x 54 mm (Width x Height x Depth)\u003cbr\u003eHeight with end legs: 49 mm\u003cbr\u003eHeight with lower legs: 51 mm\u003cbr\u003eWeight: 2100 g\u003cbr\u003eIP rating: IP69K\u003cbr\u003eApprovals: ECE: R10, R148, R149*\u003cbr\u003e*Road traffic approval does not apply to PowerBoost® mode\u003cbr\u003eWarranty: 24 months\u003c\/p\u003e","brand":"Purelux","offers":[{"title":"Default Title","offer_id":50871822451026,"sku":null,"price":199.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/2833\/9608\/files\/IMG_4675.jpg?v=1748736043"},{"product_id":"2ft-purelux-flash-600-gen2-roof-warning-beacon-bar-with-controller","title":"2ft Purelux Flash 600 Gen2 Roof Warning Beacon Bar with Controller","description":"\u003cp\u003eA modern beacon panel designed for demanding professional use, equipped with, among other things, 12 flashing functions, a warning light approved for road use, a shock-, water- and dust-resistant construction, and the best possible radio interference protection. Suitable for both 12V and 24V systems.\u003c\/p\u003e\n\u003cp\u003eR65 approved warning light\u003cbr\u003eSeparate day and night modes (R65 Class 2)\u003cbr\u003e12 different flashing functions\u003cbr\u003eSeparate Cruise mode\u003cbr\u003e360° lighting\u003cbr\u003eHighest possible IP rating\u003cbr\u003eThe best radio interference protection on the market\u003cbr\u003eStylish dark profile\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe Purelux Flash 600 Gen2 is a new generation warning light panel with an ultra-low and aerodynamic profile that meets the quality standards of demanding work environments in every aspect. The panel is equipped with 12 different flashing functions, a warning light approved for road use according to the R65 standard, an impact, water and dust resistant construction, the best possible radio interference protection (CISPR25 Class 5) and a modern dark appearance. In addition, the panel also features the much-needed Cruise mode, which allows the light to burn steadily without flashing, for example in mines. The panel spreads the light 360° around the vehicle, increasing the safety of everyone around the vehicle. In addition, it has both day and night modes (brighter in daytime and dimmer at night), in accordance with ECE R65 Class 2, so that the light does not dazzle at night, but still attracts attention in bright light.\u003c\/p\u003e\n\u003cp\u003eIn terms of size, power and functionality, the Flash 600 Gen2 is an excellent warning light for cars, vans and SUVs, as well as part of a lighting solution for smaller machinery. In addition, multiple Flash Gen2 beacon panels can also be synchronised to work together to provide uniform lighting even in larger vehicles where multiple lights are required.\u003c\/p\u003e\n\u003cp\u003eThe panel's significantly lower profile than a normal beacon and short skids ensure an aerodynamic and stylish installation that can withstand both speed and gaze. The panel's thin structure reduces air resistance and reduces wind noise, and the mounting skids allow the panel to be slightly raised from the installation surface, allowing airflow to pass under the panel. The smoke-gray and impact-resistant polycarbonate lens wraps around the sides of the beacon as well as the top, giving the light a stunning visual appearance even when turned off. Two-year (24 months) warranty!\u003c\/p\u003e\n\u003cp\u003eDelivery content\u003cbr\u003eBeacon panel Purelux Flash 600 Gen2 \u0026amp; Controller\u003cbr\u003eMounting rails\u003cbr\u003eMounting bolts\u003cbr\u003ePower cord, 5000 mm\u003cbr\u003eInstallation instructions (FI\/EN\/SE\/NO\/DK)\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eSpecifications\u003cbr\u003eBrand and model: Purelux Flash 600 Gen2\u003cbr\u003eIntended use: As a warning and safety light in cars \/ work machines, etc.\u003cbr\u003eOperating voltage: 10-36V\u003cbr\u003eManufacturer's stated current consumption: 7A @ 12V \/ 3.22A @ 24V\u003cbr\u003eManufacturer's declared power: 84 W\u003cbr\u003eMounting: Mounting foot set, mounting bolts\u003cbr\u003eConnector: No connector, straight wires\u003cbr\u003eCable length: 500 cm\u003cbr\u003eDimensions: 584 x 35 x 240 mm (Width\/Height\/Depth)\u003cbr\u003eHeight with skids: 77 mm\u003cbr\u003eWeight (with legs): 4500 g\u003cbr\u003eIP rating: IP69K\u003cbr\u003eApprovals: EMC: ECE R10, R65 Class 2, CISPR25 Class 5, CE, RoHS\u003cbr\u003eOperating temperature: -40°C - +50°C\u003cbr\u003eWarranty: 24 months\u003cbr\u003eOther: 12 different operating modes, orange light, Ultra low profile, 360° illumination\u003cbr\u003eImporter: Handshake.fi\u003cbr\u003eOperating modes\u003cbr\u003eSingle flash (R65 Class 2 )\u003cbr\u003eFast double flash (R65 Class 2)\u003cbr\u003eSlow double flash\u003cbr\u003eMulti-flash\u003cbr\u003eCombo single\/double flash output\u003cbr\u003eCombo single\/multiple flash\u003cbr\u003eBreathe\u003cbr\u003eLeft arrow\u003cbr\u003eRight arrow\u003cbr\u003eArrow from the middle\u003cbr\u003eCruise (connected with a separate wire, check quick guide)\u003cbr\u003eR65 Night mode (connected with a separate wire, check quick guide)\u003cbr\u003eQuick guide\u003cbr\u003eCoupling\u003c\/p\u003e\n\u003cp\u003eRed: Power (+)\u003cbr\u003eBlack: Ground (-)\u003cbr\u003eYellow: Warning light functions and synchronization\u003cbr\u003eBlue: Warning light #1 (R65 Night Mode)\u003cbr\u003eWhite: Cruise light\u003cbr\u003eBrown: Traffic control, left\/right\u003cbr\u003eHazard light functions: Touch the red wire with the yellow wire for less than 1 second to switch the flashing functions.\u003c\/p\u003e\n\u003cp\u003eSynchronization: Connect the yellow wire of each luminaire to be synchronized.\u003c\/p\u003e\n\u003cp\u003eFlashing function #1 (R65): Touch the red wire with the blue wire for less than 1 second.\u003c\/p\u003e\n\u003cp\u003eNight mode: Touch the red wire with the blue wire for 5 seconds. The light brightness will decrease by 50% in all flashing modes (does not apply to steady light). To disable night mode, disconnect the wire.\u003c\/p\u003e\n\u003cp\u003eSteady light: Connect the white wire to the red wire. To disable steady light, disconnect the wire. The warning panel will return to the last flashing function used.\u003c\/p\u003e\n\u003cp\u003eTraffic control: Touch the red wire with the brown wire for 1 second. The light activates the left turn signal. Touch the red wire with the brown wire for 5 seconds to activate the right turn signal.\u003c\/p\u003e","brand":"Purelux","offers":[{"title":"Default Title","offer_id":50871883628882,"sku":"","price":269.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/2833\/9608\/files\/IMG_46912.jpg?v=1748737133"},{"product_id":"3ft-purelux-flash-800-gen2-roof-warning-beacon-bar-with-controller","title":"3ft Purelux Flash 800 Gen2 Roof Warning Beacon Bar with Controller","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eA modern beacon panel designed for demanding professional use, equipped with, among other things, 12 flashing functions, a warning light approved for road use, a shock-, water- and dust-resistant construction, and the best possible radio interference protection. Suitable for both 12V and 24V systems.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eR65 approved warning light\u003cbr\u003eSeparate day and night modes (R65 Class 2)\u003cbr\u003e12 different flashing functions\u003cbr\u003eSeparate Cruise mode\u003cbr\u003e360° lighting\u003cbr\u003eHighest possible IP rating\u003cbr\u003eThe best radio interference protection on the market\u003cbr\u003eStylish dark profile\u003cbr\u003eThe Purelux Flash 800 Gen2 is a new generation warning light panel with an ultra-low and aerodynamic profile that meets the quality standards of demanding work environments in every aspect. The panel is equipped with 12 different flashing functions, a warning light approved for road use according to the R65 standard, an impact, water and dust resistant construction, the best possible radio interference protection (CISPR25 Class 5) and a modern dark appearance. In addition, the panel also features the much-needed Cruise mode, which allows the light to burn steadily without flashing, for example in mines. The panel spreads the light 360° around the vehicle, increasing the safety of everyone around the vehicle. In addition, it has both day and night modes (brighter in daytime and dimmer at night), in accordance with ECE R65 Class 2, so that the light does not dazzle at night, but still attracts attention in bright light.\u003c\/p\u003e\n\u003cp\u003eIn terms of size, power and functions, the Flash 800 Gen2 is an excellent warning light for cars, vans and SUVs, as well as part of a heavy vehicle lighting solution, especially if two panels are installed side by side. Multiple Flash Gen2 beacon panels can also be synchronized to work with each other if desired, providing uniform lighting even on larger vehicles that require more lights.\u003c\/p\u003e\n\u003cp\u003eThe panel's significantly lower profile than a normal beacon and short skids ensure an aerodynamic and stylish installation that can withstand both speed and gaze. The panel's thin structure reduces air resistance and reduces wind noise, and the mounting skids allow the panel to be slightly raised from the installation surface, allowing airflow to pass under the panel. The smoke-gray and impact-resistant polycarbonate lens wraps around the sides of the beacon as well as the top, giving the light a stunning visual appearance even when turned off. Two-year (24 months) warranty!\u003c\/p\u003e\n\u003cp\u003eDelivery content\u003cbr\u003eBeacon panel Purelux Flash 800 Gen2 \u0026amp; controller\u003cbr\u003eMounting rails\u003cbr\u003eMounting bolts\u003cbr\u003ePower cord without connector, 5000 mm\u003cbr\u003eInstallation instructions (FI\/EN\/SE\/NO\/DK)\u003cbr\u003eSpecifications\u003cbr\u003eBrand and model: Purelux Flash 800 Gen2\u003cbr\u003eIntended use: As a warning and safety light in cars \/ work machines, etc.\u003cbr\u003eOperating voltage: 10-36V\u003cbr\u003eManufacturer's stated current consumption: 8.45A @ 12V \/ 3.9A @ 24V\u003cbr\u003eManufacturer's declared power: 102 W\u003cbr\u003eMounting: Mounting foot set, mounting bolts\u003cbr\u003eConnector: No connector, straight wires\u003cbr\u003eCable length: 500 cm\u003cbr\u003eDimensions: 784 x 35 x 240 mm (Width\/Height\/Depth)\u003cbr\u003eHeight with skids: 77 mm\u003cbr\u003eWeight (with legs): 5900 g\u003cbr\u003eIP rating: IP69K\u003cbr\u003eApprovals: EMC: ECE R10, R65 Class 2, CISPR25 Class 5, CE, RoHS\u003cbr\u003eOperating temperature: -40°C - +50°C\u003cbr\u003eWarranty: 24 months\u003cbr\u003eOther: 12 different operating modes, orange light, Ultra low profile, 360° illumination\u003cbr\u003eImporter: Handshake.fi\u003cbr\u003eOperating modes\u003cbr\u003eSingle flash (R65 Class 2 )\u003cbr\u003eFast double flash (R65 Class 2)\u003cbr\u003eSlow double flash\u003cbr\u003eMulti-flash\u003cbr\u003eCombo single\/double flash output\u003cbr\u003eCombo single\/multiple flash\u003cbr\u003eBreathe\u003cbr\u003eLeft arrow\u003cbr\u003eRight arrow\u003cbr\u003eArrow from the middle\u003cbr\u003eCruise (connected with a separate wire, check quick guide)\u003cbr\u003eR65 Night mode (connected with a separate wire, check quick guide)\u003cbr\u003eQuick guide\u003cbr\u003eCoupling\u003c\/p\u003e\n\u003cp\u003eRed: Power (+)\u003cbr\u003eBlack: Ground (-)\u003cbr\u003eYellow: Warning light functions and synchronization\u003cbr\u003eBlue: Warning light #1 (R65 Night Mode)\u003cbr\u003eWhite: Cruise light\u003cbr\u003eBrown: Traffic control, left\/right\u003cbr\u003eHazard light functions: Touch the red wire with the yellow wire for less than 1 second to switch the flashing functions.\u003c\/p\u003e\n\u003cp\u003eSynchronization: Connect the yellow wire of each luminaire to be synchronized.\u003c\/p\u003e\n\u003cp\u003eFlashing function #1 (R65): Touch the red wire with the blue wire for less than 1 second.\u003c\/p\u003e\n\u003cp\u003eNight mode: Touch the red wire with the blue wire for 5 seconds. The light brightness will decrease by 50% in all flashing modes (does not apply to steady light). To disable night mode, disconnect the wire.\u003c\/p\u003e\n\u003cp\u003eSteady light: Connect the white wire to the red wire. To disable steady light, disconnect the wire. The warning panel will return to the last flashing function used.\u003c\/p\u003e\n\u003cp\u003eTraffic control: Touch the red wire with the brown wire for 1 second. The light activates the left turn signal. Touch the red wire with the brown wire for 5 seconds to activate the right turn signal.\u003c\/p\u003e","brand":"Purelux","offers":[{"title":"Default Title","offer_id":50871886250322,"sku":null,"price":299.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/2833\/9608\/files\/IMG_46912.jpg?v=1748737133"},{"product_id":"4ft-purelux-flash-1200-gen2-roof-warning-beacon-bar-with-controller","title":"4ft Purelux Flash 1200 Gen2 Roof Warning Beacon Bar with Controller","description":"\u003cp\u003eA modern beacon panel designed for demanding professional use, equipped with, among other things, 12 flashing functions, a warning light approved for road use, a shock-, water- and dust-resistant construction, and the best possible radio interference protection. Suitable for both 12V and 24V systems.\u003c\/p\u003e\n\u003cp\u003eR65 approved warning light\u003cbr\u003eSeparate day and night modes (R65 Class 2)\u003cbr\u003e12 different flashing functions\u003cbr\u003eSeparate Cruise mode\u003cbr\u003e360° lighting\u003cbr\u003eHighest possible IP rating\u003cbr\u003eThe best radio interference protection on the market\u003cbr\u003eStylish dark profile\u003cbr\u003eThe Purelux Flash 1200 Gen2 is a new generation warning light panel with an ultra-low and aerodynamic profile that meets the quality standards of demanding work environments in every aspect. The panel is equipped with 12 different flashing functions, a warning light approved for road use according to the R65 standard, an impact, water and dust resistant construction, the best possible radio interference protection (CISPR25 Class 5) and a modern dark appearance. In addition, the panel also features the much-needed Cruise mode, which allows the light to burn steadily without flashing, for example in mines. The panel spreads the light 360° around the vehicle, increasing the safety of everyone around the vehicle. In addition, it has both day and night modes (brighter in daytime and dimmer at night), in accordance with ECE R65 Class 2, so that the light does not dazzle at night, but still attracts attention in bright light.\u003c\/p\u003e\n\u003cp\u003eIn terms of size, power and functions, the Flash 1200 Gen2 is an excellent warning light for trucks, trailers and various types of machinery. If desired, several Flash Gen2 beacon panels can also be synchronized to work with each other, which makes the lighting uniform even in larger vehicles that require more lights.\u003c\/p\u003e\n\u003cp\u003eThe panel's significantly lower profile than a normal beacon and the short skids ensure an aerodynamic and stylish installation that can withstand both speed and gaze. The panel's thin structure reduces air resistance and reduces the hiss caused by wind, and thanks to the mounting skids, the panel rises slightly from the installation surface, allowing airflow to pass under the panel. The smoke-gray and impact-resistant polycarbonate lens wraps around the sides of the beacon as well as the top, giving the light a great visual appearance even when turned off. Two-year (24-month) warranty!\u003c\/p\u003e\n\u003cp\u003eDelivery content\u003cbr\u003eBeacon panel Purelux Flash 1200 Gen2 \u0026amp; controller\u003cbr\u003eMounting rails\u003cbr\u003eMounting bolts\u003cbr\u003ePower cord without connector, 5000 mm\u003cbr\u003eInstallation instructions (FI\/EN\/SE\/NO\/DK)\u003cbr\u003eSpecifications\u003cbr\u003eBrand and model: Purelux Flash 1200 Gen2\u003cbr\u003eIntended use: As a warning and safety light in cars \/ work machines, etc.\u003cbr\u003eOperating voltage: 10-36V\u003cbr\u003eManufacturer's stated current consumption: 11.4A @ 12V \/ 5.1A @ 24V\u003cbr\u003eManufacturer's declared power: 137 W\u003cbr\u003eMounting: Mounting foot set, mounting bolts\u003cbr\u003eConnector: No connector, straight wires\u003cbr\u003eCable length: 500 cm\u003cbr\u003eDimensions: 1184 x 35 x 240 mm (Width\/Height\/Depth)\u003cbr\u003eHeight with skids: 77 mm\u003cbr\u003eWeight (with legs): 7700 g\u003cbr\u003eIP rating: IP69K\u003cbr\u003eApprovals: EMC: ECE R10, R65 Class 2, CISPR25 Class 5, CE, RoHS\u003cbr\u003eOperating temperature: -40°C - +50°C\u003cbr\u003eWarranty: 24 months\u003cbr\u003eOther: 12 different operating modes, orange light, Ultra low profile, 360° illumination\u003cbr\u003eImporter: Handshake.fi\u003cbr\u003eOperating modes\u003cbr\u003eSingle flash (R65 Class 2 )\u003cbr\u003eFast double flash (R65 Class 2)\u003cbr\u003eSlow double flash\u003cbr\u003eMulti-flash\u003cbr\u003eCombo single\/double flash output\u003cbr\u003eCombo single\/multiple flash\u003cbr\u003eBreathe\u003cbr\u003eLeft arrow\u003cbr\u003eRight arrow\u003cbr\u003eArrow from the center\u003cbr\u003eCruise (connected with a separate wire, check quick guide)\u003cbr\u003eR65 Night mode (connected with a separate wire, check quick guide)\u003cbr\u003eQuick guide\u003cbr\u003eCoupling\u003c\/p\u003e\n\u003cp\u003eRed: Power (+)\u003cbr\u003eBlack: Ground (-)\u003cbr\u003eYellow: Warning light functions and synchronization\u003cbr\u003eBlue: Warning light #1 (R65 Night Mode)\u003cbr\u003eWhite: Cruise light\u003cbr\u003eBrown: Traffic control, left\/right\u003cbr\u003eHazard light functions: Touch the red wire with the yellow wire for less than 1 second to switch the flashing functions.\u003c\/p\u003e\n\u003cp\u003eSynchronization: Connect the yellow wire of each luminaire to be synchronized.\u003c\/p\u003e\n\u003cp\u003eFlashing function #1 (R65): Touch the red wire with the blue wire for less than 1 second.\u003c\/p\u003e\n\u003cp\u003eNight mode: Touch the red wire with the blue wire for 5 seconds. The light brightness will decrease by 50% in all flashing modes (does not apply to steady light). To disable night mode, disconnect the wire.\u003c\/p\u003e\n\u003cp\u003eSteady light: Connect the white wire to the red wire. To disable steady light, disconnect the wire. The warning panel will return to the last flashing function used.\u003c\/p\u003e\n\u003cp\u003eTraffic control: Touch the red wire with the brown wire for 1 second. The light activates the left turn signal. Touch the red wire with the brown wire for 5 seconds to activate the right turn signal.\u003c\/p\u003e","brand":"Purelux","offers":[{"title":"Default Title","offer_id":50871901552978,"sku":null,"price":399.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/2833\/9608\/files\/IMG_46912.jpg?v=1748737133"},{"product_id":"purelux-square-40-hd-gen2-heavy-duty-led-work-light","title":"Purelux Square 40 HD Gen2 Heavy Duty LED Work Light","description":"\u003cp\u003eA work light intended for heavy professional use, which is equipped with e.g. with a wide light beam, a durable frame, a sturdy mounting leg and an excellent size-to-power ratio. 5000K color temperature, IP69K protection rating. Measured light output 2954 lm, measured range 71 m (@ 1 lux).\u003c\/p\u003e\n\u003cp\u003ePurelux Square 40 HD Gen2 is an updated version of its manufacturer's smallest light in the HD product line intended for heavy professional use. This lamp produces a light output of 2954 lumens and a very wide and even, 85-degree light pattern. High-performance LEDs combined with a high-quality grooved lens maximize the effective lighting of the nearby area and create a beam range of 71 meters @ 1 lux. The wide light pattern, small size and durable construction make the Square 40 HD Gen2 a suitable choice for e.g. for the booms of excavators and as a bucket light, the base of heavy equipment and other applications that require a small size but high light output. The neutral 5000K color temperature, optimized for nighttime use, facilitates discrimination, maximizes sharpness and accuracy, and is gentle on the eyes even during long periods of use .\u003c\/p\u003e\n\u003cp\u003eThe work lights of the Purelux Square HD series are equipped with an exceptionally sturdy, stainless steel leg, which ensures a very stable installation even in the most demanding applications (excavators, tractors, wheel loaders, etc.). The lens of the lamp, on the other hand, is practically unbreakable polycarbonate and the frame is durable aluminum, which is coated with black powder paint that prevents corrosion and the effects of UV radiation. The shock- and vibration-resistant structure combined with an advanced temperature regulation system guarantee operational reliability even in the most demanding applications. All lights of the Square HD series also have the highest possible tightness rating (IP69K), and in addition, they are protected against radio interference according to the CISPR25 Class 4 classification.\u003c\/p\u003e\n\u003cp\u003eDelivery content\u003cbr\u003ePurelux Square 40 HD Gen2\u003cbr\u003eSturdy mounting leg\u003cbr\u003eFixing bolt (M10)\u003cbr\u003eRubber covers\u003cbr\u003ePower cable with DT2 connector, 50 cm\u003cbr\u003eConnector counterpart\u003cbr\u003eConnection and installation instructions (EN, FI, SE, NO, DK)\u003cbr\u003eSpecifications\u003cbr\u003eBrand and model: Purelux Square 40 HD Gen2\u003cbr\u003ePurpose: As a work light in work machines \/ heavy equipment \/ cars\u003cbr\u003eOperating voltage: 9-32 V\u003cbr\u003eTheoretical power declared by the manufacturer: 40 W\u003cbr\u003eMeasured by lighting: 29 W\u003cbr\u003eLight output stated by the manufacturer: 3400 lm\u003cbr\u003eColor temperature stated by the manufacturer: 5000 K\u003cbr\u003eMounting: Mounting base\u003cbr\u003eConnector: DT-2\u003cbr\u003eCable length: 50 cm\u003cbr\u003eDimensions: 120 x 82 x 77 mm (Width x Height x Depth)\u003cbr\u003eHeight with mounting foot: 96 mm\u003cbr\u003eWeight: 1100 g\u003cbr\u003eIP rating: IP69K\u003cbr\u003eOperating temperature: -45°C to +85°C\u003cbr\u003eApprovals: EMC: ECE R10, CISPR25 Class 4\u003cbr\u003eWarranty: 24 months\u003c\/p\u003e","brand":"Purelux","offers":[{"title":"Default Title","offer_id":51219835650386,"sku":null,"price":74.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/2833\/9608\/files\/IMG_54423.jpg?v=1753828219"},{"product_id":"purelux-road-black-mf160-4-function-6-mini-lightbar-tail-brake-indicate-reverse","title":"Purelux Road Black MF160 - 4 Function 6\" Mini Lightbar - Tail, Brake, Indicate \u0026 Reverse","description":"\u003cp\u003eMultifunctional work lighting for mounting on the back of vehicles. Reverse lights, orange warning lights, and red warning and brake lights - All in one!\u003c\/p\u003e\n\u003cp\u003eThe Purelux Road Black MF160 is a compact, multifunctional work light specially designed for installation on the back of the vehicle. In keeping with its Multi-Function name, the MF160 has several different functions, which include a steady orange warning light, a white reverse light, an orange turn signal, as well as red brake lights and parking lights. The various functions can be wired to take the excitation current from the vehicle's own lights, making them work with each of the car's functions (reverse lights, indicators, tail and brake lights) simultaneously, or the functions can be wired behind a separate switch. In the latter case, the driver can choose when which function should be used. Each function has its own cord that comes from the power cord, thanks to which all or only some of the functions can be switched on.\u003c\/p\u003e\n\u003cp\u003eThe MF160 is ideally suited for, for example, trucks, construction vehicles, all-terrain vehicles and as part of the equipment of heavy equipment. Of course, it can also be used in ordinary cars, as it is approved as a reversing light, brake light, parking light and direction of travel light according to standards R6, R7, R23 and R148. Thus, the Road Black MF160 can be used, for example, as an additional brake light or parking light for a truck trailer, as a reversing light for an SUV or, for example, as a turn signal for a construction vehicle.\u003c\/p\u003e\n\u003cp\u003eThe light is easy to attach with the included mounting foot, and the panel's slim fixture allows for discreet mounting even in tight spaces, so mounting options are almost limitless. The fixture is made of durable and UV-protected powder-coated aluminum, which is designed to withstand hard and daily use even under extreme conditions. The elegant dark structure combined with the frameless, virtually unbreakable polycarbonate lens makes the MF160 a modern addition to any vehicle. Installation is facilitated by the direct plus cables that come from the power cord separately for each function, making connection easier. The MF160 can be connected to both 12V and 24V systems.\u003c\/p\u003e\n\u003cp\u003eContent\u003cbr\u003ePurelux Road Black MF160\u003cbr\u003eMounting foot\u003cbr\u003ePower cord\u003cbr\u003eConnection and installation instructions (EN, FI, SE, NO)\u003cbr\u003eTechnical specification\u003c\/p\u003e\n\u003cp\u003eBrand and model: Purelux Road Black MF160\u003cbr\u003ePurpose: As reversing and warning lights in cars\/contract machines\u003cbr\u003eOperating voltage: 12 \/ 24 V\u003cbr\u003eEstimated power: 12W\u003cbr\u003eMounting: Mounting foot\u003cbr\u003eContact: No contact, straight wires\u003cbr\u003eCable length: approx. 50 cm\u003cbr\u003eDimensions: 157 x 60 x 49.7 mm (Width x Length x Depth)\u003cbr\u003eWeight: 450 g\u003cbr\u003eProtection class: IP68\u003cbr\u003eApprovals: EMC: ECE: R6, R7, R23, R148\u003cbr\u003eWarranty: 24 months\u003cbr\u003eQuick guide\u003cbr\u003eCoupling\u003c\/p\u003e\n\u003cp\u003eGrey: White reverse light\u003cbr\u003eRed: Red brake light\u003cbr\u003eYellow: Orange blinkers\u003cbr\u003eGreen: Red parking light\u003cbr\u003eBlack: Earth\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eLight sequence: Reverse light -\u0026gt; Brake light -\u0026gt; Parking light. That is, if the parking and brake lights are on, and the reversing light is on, the work lighting is switched on in reversing light mode.\u003c\/p\u003e","brand":"Purelux","offers":[{"title":"Default Title","offer_id":51219953385810,"sku":null,"price":69.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/2833\/9608\/files\/IMG_5455.jpg?v=1753829357"},{"product_id":"purelux-black-raven-32-60w-wide-beam-led-work-light","title":"Purelux Black Raven 32 - 60W Wide Beam LED Work Light","description":"\u003cp\u003eA wide-beam work light intended for demanding applications and heavy professional use, which offers extreme operational reliability even in challenging conditions. Impact resistant body, sturdy mounting, 5000K color temperature, IP69K rating. Measured light output 3573 lm.\u003c\/p\u003e\n\u003cp\u003e DESIGNED FOR THE NEEDS OF PROFESSIONAL DRIVERS \u003cbr\u003ePurelux Black Raven 32 is an efficient and durable work light with a wide light pattern, which is part of the manufacturer's Black Raven work light series designed for demanding professional use. This product family has been created to withstand the extreme conditions created by the changing seasons, as evidenced by e.g. Jykevä frame, coated with a customized coating, excellently resistant to light corrosion, which passes e.g. 1000 hour NSS (Neutral Salt Spray) test. The entire series is also vibration tested with a force of 15G, which ensures durability even in heavy work use. Vibration resistance is an important feature, especially in the use of heavy vehicles, when the light is constantly subjected to loads and vibrations from the vehicle's frame, the force of which weakens the lights. The Black Raven 32 represents the middle class of its series in terms of its size and power. With a light output of 3573 lumens, the lamp creates a very wide and even light beam, which illuminates the vehicle's immediate areas extensively and efficiently. The frame, which is exceptionally resistant to corrosion-prone conditions, combined with a high-quality spotlight, makes the Black Raven series an excellent choice for, for example, trucks, logging trucks, snowplows, wheel loaders, road construction sites, and practically all such vehicles that work in the middle of traffic, in other words, road salt, mud, small and splashy mud .\u003c\/p\u003e\n\u003cp\u003eAlso worth mentioning is the 5000 kelvin color temperature of the lights, which maximizes sharpness and accuracy, making it much easier to detect terrain shapes and obstacles. The neutral color temperature has also been proven to reduce the strain on the eyes, so that the level of alertness is maintained, and even long-term work does not cause eye fatigue. In addition, the lights of the Black Raven series are completely impact-resistant (tested with up to 60G force), and they are equipped with e.g. with the best possible tightness rating (IP68\/IP69K), a stunning black frame, a sturdy mounting base and the TCS heat regulation system (Automatic Temperature Control System), which takes care of continuous operational reliability. So it is undoubtedly a light series suitable for year-round conditions, which will never leave its user in trouble.\u003c\/p\u003e\n\u003cp\u003eIn terms of appearance, the Black Ravens are completely unique, and the black frame of the lens gives them an eye-catching modern look. The installation of the lights is facilitated by the DT-plug attached to the power cable, as well as the sturdy mounting base, which allows the lights to be mounted practically anywhere. Wide operating voltage (9-36V) enables installation in both 12V and 24V systems. Black Raven is protected against radio interference according to the CISPR25 Class 3 classification.\u003c\/p\u003e\n\u003cp\u003eDelivery content\u003cbr\u003ePurelux Black Raven 32\u003cbr\u003eSturdy mounting leg\u003cbr\u003eFixing bolt (M8)\u003cbr\u003ePower cable with DT-2 connector (50 cm)\u003cbr\u003eConnection and installation instructions (EN, FI, SE, NO, DK)\u003cbr\u003eTechnical information\u003c\/p\u003e\n\u003cp\u003eBrand and model: Purelux Black Raven 32\u003cbr\u003ePurpose: As a work light in work machines, heavy equipment and cars\u003cbr\u003eLED: 12 x 5W\u003cbr\u003eOperating voltage: 9-36V\u003cbr\u003eTheoretical power declared by the manufacturer: 60 W\u003cbr\u003eTheoretical light output: 3580 lm\u003cbr\u003eColor temperature stated by the manufacturer: 5000 K\u003cbr\u003eMounting: Mounting base\u003cbr\u003eConnector: DT-2 plug\u003cbr\u003eCable length: 50 cm\u003cbr\u003eDimensions: 115 x 65 x 45 mm (Width x Height x Depth)\u003cbr\u003eHeight with foot: 97 mm\u003cbr\u003eWeight: 460 g\u003cbr\u003eIP rating: IP68\/IP69K\u003cbr\u003eApprovals: EMC: ECE: R10, CISPR25 Class 3\u003cbr\u003eWarranty: 24 months\u003c\/p\u003e","brand":"Purelux","offers":[{"title":"Default Title","offer_id":51220059160914,"sku":null,"price":54.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/2833\/9608\/files\/IMG_54462.jpg?v=1753830712"},{"product_id":"purelux-black-raven-20-40w-wide-beam-led-work-light","title":"Purelux Black Raven 20 - 40W Wide Beam LED Work Light","description":"\u003cp\u003eA wide-beam work light intended for demanding applications and heavy professional use, which offers extreme operational reliability even in challenging conditions. Impact resistant body, sturdy mounting, 5000K color temperature, IP69K rating, R148 approval. Declared light output 4400 lm.\u003c\/p\u003e\n\u003cp\u003e DESIGNED FOR THE NEEDS OF PROFESSIONAL DRIVERS \u003cbr\u003ePurelux Black Raven 20 is an efficient and durable work light with a wide light pattern, which is part of the manufacturer's Black Raven work light series designed for demanding professional use. This product family has been created to withstand the extreme conditions created by the changing seasons, as evidenced by e.g. Jykevä frame, coated with a customized coating, excellently resistant to light corrosion, which passes e.g. 1000 hour NSS (Neutral Salt Spray) test. The entire series is also vibration tested with a force of 15G, which ensures durability even in heavy work use. Vibration resistance is an important feature, especially in the use of heavy vehicles, when the light is constantly subjected to loads and vibrations from the vehicle's frame, the force of which weakens the lights. The Black Raven 20 is the most compact in its series, and with a light output of 2104 lumens, it forms a very wide and uniform light beam that illuminates the vehicle's immediate areas extensively and efficiently. The body, which is exceptionally resistant to corrosion-prone conditions, combined with a high-quality spotlight, makes Black Raven lights an excellent choice for, for example, trucks, logging trucks, snowplows, wheel loaders, road construction sites and practically all such vehicles that work in the middle of traffic, i.e. road salt, mud, small and splashy mud.\u003c\/p\u003e\n\u003cp\u003eAlso worth mentioning is the 5000 kelvin color temperature of the lights, which maximizes sharpness and accuracy, making it much easier to detect terrain shapes and obstacles. The neutral color temperature has also been proven to reduce the strain on the eyes, so that the level of alertness remains good and even long-term work does not cause eye fatigue. In addition, the lights of the Black Raven series are completely impact-resistant (tested with up to 60G force), and they are equipped with e.g. with the best possible tightness rating (IP68\/IP69K), R148 approval, a stunning black frame, a sturdy mounting base and the TCS heat regulation system (Automatic Temperature Control System), which takes care of continuous operational reliability. So it is undoubtedly a light series suitable for year-round conditions, which will not leave the user in trouble.\u003c\/p\u003e\n\u003cp\u003eIn terms of appearance, the Black Ravens are completely unique, and the black frame of the lens gives them an eye-catching modern look. The installation of the lights is facilitated by the DT cable already attached to the frame, as well as the sturdy mounting base, which allows the lights to be mounted practically anywhere. Wide operating voltage (9-36V) enables installation in both 12V and 24V systems. Black Ravenit is protected against radio interference according to the CISPR25 Class 3 classification, and their R148 approval enables use in road traffic also as reversing lights, so it is a very high-quality and versatile set of work lights.\u003c\/p\u003e\n\u003cp\u003eDelivery content\u003cbr\u003ePurelux Black Raven 20\u003cbr\u003eSturdy mounting leg\u003cbr\u003eFixing bolt (M8)\u003cbr\u003ePower cable with DT-2 connector (50 cm)\u003cbr\u003eConnection and installation instructions (EN, FI, SE, NO, DK)\u003cbr\u003eTechnical information\u003c\/p\u003e\n\u003cp\u003eBrand and model: Purelux Black Raven 20\u003cbr\u003ePurpose: As a work light in work machines, heavy equipment and cars\u003cbr\u003eLED: 8 x 5W\u003cbr\u003eOperating voltage: 9-36V\u003cbr\u003eTheoretical power declared by the manufacturer: 40 W\u003cbr\u003eLight output stated by the manufacturer: 2260 lm\u003cbr\u003eColor temperature stated by the manufacturer: 5000 K\u003cbr\u003eMounting: Mounting base\u003cbr\u003eConnector: Deutch DT-2\u003cbr\u003eCable length: 50 cm\u003cbr\u003eDimensions: 90.9 x 70.1 x 36 mm\u003cbr\u003eHeight with foot: 104 mm\u003cbr\u003eWeight: 330 g\u003cbr\u003eIP rating: IP68\/IP69K\u003cbr\u003eApprovals: EMC: ECE: R10, R148, CISPR25 Class 3\u003cbr\u003eWarranty: 24 months\u003c\/p\u003e","brand":"Purelux","offers":[{"title":"Default Title","offer_id":51220122960210,"sku":null,"price":44.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/2833\/9608\/files\/IMG_54503.jpg?v=1753831364"},{"product_id":"magnetic-bracket-for-lightbars-work-lights-purelux","title":"Magnetic Bracket For Lightbars \/ Work Lights - Purelux","description":"\u003cp\u003eVery easy-to-use magnetic foot for attaching additional and work lights. Really strong double magnets, thanks to which the light can't tilt.\u003c\/p\u003e\n\u003cp\u003ePurelux Pro Magnet Horizontal is a convenient, really easy-to-use magnetic bracket for attaching additional and work lights. With the help of a magnet, attaching and detaching the light is very easy and quick. In addition, the magnetic fastener is suitable for situations where you don't want or can't make holes for fastening. The magnets themselves are very strong, and they also have a rubber coating both to prevent the surface from being scratched and to increase the friction between the magnet and the mounting surface. Exceptionally, the brackets have two magnets\/leg. The purpose of this is both to keep the light more firmly attached to the surface than usual and to prevent the light from tilting, which could detach the magnets from the surface. The Horizontal Mount is intended for mounting e.g. round additional lights and work lights, as well as all lights equipped with their own feet , but of course it can also be used, for example, for more stable mounting of a longer panel by installing the Horizontal Mount, for example, in the middle of the panel. Sold individually. Also available is the Purelux Vertical Mount, which is intended, for example, for the end mounting of panel lights. The bracket is not approved for road use!\u003c\/p\u003e\n\u003cp\u003eNOTE! We do not recommend magnetic attachment in places where the light may come off while driving. Even though it is a very powerful double magnet, in theory it could swing or, at worst, come off in the right air flow and vibration and that's why the bracket is not approved to road traffic.\u003c\/p\u003e\n\u003cp\u003eCharacteristics\u003cbr\u003eProduct: Magnetic stand Purelux Pro Magnet Horizontal\u003cbr\u003ePurpose: Attachment and installation of additional and work lights\u003cbr\u003eVery strong magnets\u003cbr\u003eThe double magnet prevents the light from tilting and coming off\u003cbr\u003eDimensions: 195 x 30 mm (Width x Height)\u003cbr\u003eFixing hole diameter: ⌀ 10 mm\u003cbr\u003eMagnet diameter: ⌀ 88 mm\u003cbr\u003eVertical tension (one magnet): 40 kg\u003c\/p\u003e","brand":"Purelux","offers":[{"title":"Default Title","offer_id":51220161855826,"sku":null,"price":24.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/2833\/9608\/files\/IMG_5458.jpg?v=1753831927"},{"product_id":"purelux-ranger-9-9-auxiliary-light-11-632lumens-amber-or-white-drl-amber-strobe-dual-power-mode","title":"Purelux Ranger 9 - 9\" Auxiliary Light 11,632Lumens - Amber or White DRL - Amber Strobe - Dual Power Mode","description":"\u003cp\u003eA 9\" auxiliary light with a unique combination beam, two different power modes and an R65-approved warning light, especially for higher installation locations. The stunning design and dynamic parking light that creates depth in the lens, which lights up in orange or white, bring a striking appearance to the fierce performance. Declared light output 11632 lumens, range 840 m @ 1 lux.\u003c\/p\u003e\n\u003cp\u003ePowerBoost® technology\u003cbr\u003eUnique combination spotlight\u003cbr\u003e11632 lumens, 840 meters (@ 1 lux)\u003cbr\u003eR65 approved warning light\u003cbr\u003eDynamic parking light\u003cbr\u003eGreat design\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe Purelux Ranger 9 is a striking and powerful 9\" auxiliary light, designed specifically for the needs of SUVs, vans and heavy equipment. The light is equipped with, among other things, very high performance, two different power modes, an R65-approved warning light, a dynamic parking light and a stunning design - in other words, everything that could be needed from an auxiliary light. It lives up to its lofty name by producing a whopping 11632 lumens of light output in unlimited PowerBoost® mode and creating an impressive beam of light that can reach up to 840 meters (@ 1 lux). Although rangers are known to not need backup, the light output and beam can be increased even further by installing two or more officers on the roof or front of the vehicle to patrol side by side.\u003c\/p\u003e\n\u003cp\u003eThe light has two built-in power modes that allow you to fully exploit the light's potential in every situation: the more moderate power mode can be used on the road, while the full-power PowerBoost® can be used anywhere off-road. The high light output combined with the unique and stunning combination light beam makes the Ranger an unbeatable choice for both front and roof installations. The stylish and detailed design and the dynamic parking light that lights up in orange or white at the top and bottom of the light ensure a great overall look for the vehicle whenever the auxiliary light is not in use, and the bright orange warning light ensures that the vehicle is definitely seen in the dark of night as well as in the sunshine.\u003c\/p\u003e\n\u003cp\u003eUnlike usual, there is no need to connect or disconnect any extra cable to activate the different power modes of the light, but switching between PowerBoost® and road mode is done using a unique selector integrated into the user interface. This means that the power mode can be changed easily and quickly directly, even while driving.\u003c\/p\u003e\n\u003cp\u003eNote! The difference between Purelux PowerBoost® and road mode is clearly noticeable in use - PowerBoost® mode is significantly more efficient and should not be used when driving in normal road traffic, only off-road.\u003c\/p\u003e\n\u003cp\u003eThe Ranger's light beam consists of a bright and far-reaching main spot in the middle, surrounded by a wide beam that opens widely to the sides. Unlike many other auxiliary lights, the Ranger's spot is not exactly in the middle of the light beam, but a click higher. This allows the light to be installed on the roof or on the front of larger vehicles so that the spot can be directed far forward and the wider beam that opens to the sides and sides can be directed evenly to the edges of the road and shoulders right from the front. Although the main spot is at the top of the light beam and the rest of the beam is formed to the side and below it, the light beam as a whole is well-defined vertically, so that the light is not unnecessarily lost to the sky, and a dazzling ball of light is not formed immediately in front of the front. Thanks to its distinctive beam, the Ranger 9 is an excellent choice for trucks, construction vehicles and other higher installation locations, but of course it can also be installed on the front of vans or SUVs, for example, and by directing the beam it also fits nicely on passenger cars.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eIn addition to its excellent lighting properties, the Ranger 9 is equipped with an R65-approved orange warning light, which can be used, for example, in special transport, when the vehicle is moving from the road to a construction site, in traffic control or in situations where work is being carried out on the road that disrupts traffic. The bright warning light will not go unnoticed by anyone, so the safety of those working on the vehicle and those passing by it is guaranteed without separate warning lights. The warning light integrated into the auxiliary light can be installed, for example, behind a separate switch, so that it can be used whenever needed. Several lights can also be synchronized with each other, so that they can be flashed at the same time and the overall appearance of the vehicle remains consistent.\u003c\/p\u003e\n\u003cp\u003eIn appearance, the Ranger 9 represents the elite of round auxiliary lights: spectacularly placed LEDs, stylishly visible reflector surfaces through the lens, and dark optics combined with an edgy design and parking lights that create depth in the lens create a whole that improves the appearance of any vehicle. The warning light line running across the lens completes the structure of the front part of the light and makes it stand out from the crowd. The dark-toned profile ensures an inconspicuous installation when the lights are off, but with the dynamically lit and wonderfully designed parking lights, the overall appearance of the light comes to life and speaks to even the most critical onlookers. This auxiliary light therefore allows its user to choose whether the installation is discreet or spectacular. The light comes with a mounting foot, and installation is facilitated by a ready-made place for a support bar in the light, a DTP connector already in place in the power cable, and separate wires from the power cable for the parking lights and warning light. The wide operating voltage range (10-30V) allows installation in both 12V and 24V systems. The lamp is radio interference-protected according to the ECE R10 standard. Two-year (24 months) warranty!\u003c\/p\u003e\n\u003cp\u003eSpecifications\u003cbr\u003eBrand and model: Purelux Ranger 9\u003cbr\u003eIntended use: As an auxiliary light in cars \/ work machines\u003cbr\u003eOperating voltage: 10-30 V (DC)\u003cbr\u003eReference number: 25\u003cbr\u003eRated power: 188 W\u003cbr\u003ePower consumption measured by the light bulb\u003cbr\u003ePurelux PowerBoost®: 5.98A @ 24V\u003cbr\u003eRoad mode: 0.69A @ 24V\u003cbr\u003ePower measured by the light bulb\u003cbr\u003ePurelux PowerBoost®: 143.7 W\u003cbr\u003eRoad mode: 16.6 W\u003cbr\u003eParking lights: 7.3 W\u003cbr\u003eRange measured by the light tower: 840 m @ 1 lux \/ 1680 m @ 0.25 lux (Purelux PowerBoost®)\u003cbr\u003eRange measured by the beacon: 315 m @ 1 lux \/ 630 m @ 0.25 lux (Road mode)\u003cbr\u003eRange with multiple lights, measured (PowerBoost® \/ E-approved, @ 1 lux):\u003cbr\u003eWith two: 1188 m \/ 445 m (@ 1 lux)\u003cbr\u003eWith three: 1455 m \/ 546 m (@ 1 lux)\u003cbr\u003eWith four: 1680 m \/ 630 m (@ 1 lux)\u003cbr\u003eManufacturer's stated color temperature: 5700 K\u003cbr\u003eMeasured by Valostore: 6060 K\u003cbr\u003eMounting: Mounting foot\u003cbr\u003eConnector: DTP-2\u003cbr\u003eParking lights and hazard warning lights + separate wires\u003cbr\u003eCable length: approx. 700 mm\u003cbr\u003eDimensions: 228 x 209 x 92 mm (Width x Height x Depth)\u003cbr\u003eHeight with mounting foot: 237.5 mm\u003cbr\u003eWeight: 3000g\u003cbr\u003eIP rating: IP69K\u003cbr\u003eApprovals: ECE R10, R148, R149, R65, CE, RoHS\u003cbr\u003eRoad traffic approval does not apply to Purelux PowerBoost® mode\u003cbr\u003eWarranty: 24 months\u003cbr\u003eImporter: Handshake.fi\u003cbr\u003eInstallation guide\u003cbr\u003eCoupling\u003c\/p\u003e\n\u003cp\u003eDTP connector: Auxiliary light\u003cbr\u003eYellow: Orange parking light\u003cbr\u003eWhite: White parking light\u003cbr\u003eGreen: Warning light (R65)\u003cbr\u003eGray: Hazard light synchronization (Connects to the gray cable on the second Ranger 9)\u003cbr\u003eChanging the power mode with UI technology: The light will turn on in PowerBoost mode when first used. To change the power mode, turn the light off, then turn it on for two seconds, and turn the light off and on twice within 1.5 seconds to change the power mode. Repeat to change the power mode again.\u003c\/p\u003e\n\u003cp\u003eBasic delivery content (1 pc)\u003cbr\u003ePurelux Ranger 9\u003cbr\u003eMounting foot\u003cbr\u003ePower cord with DTP-2 connector\u003cbr\u003eConnection and installation instructions (FI\/SE\/NO\/DK)\u003c\/p\u003e","brand":"Purelux","offers":[{"title":"Default Title","offer_id":51684985438546,"sku":null,"price":199.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/2833\/9608\/files\/IMG_70773.jpg?v=1759871402"},{"product_id":"purelux-radar-reverse-light-9-cm-32watt-wide-beam","title":"Purelux Radar Reverse Light - 9 cm \/ 32Watt \/ Wide Beam","description":"\u003cp\u003eA small and sleek reversing light with a vertically flattened but wide and even beam that can be opened up to 180° in width. The neutral 5000K color temperature, impact-resistant construction and the highest possible tightness rating (IP69K) make the light the perfect companion for low installation heights and challenging road conditions. Suitable for 12V and 24V systems.\u003c\/p\u003e\n\u003cp\u003ePurelux Radar is a very small and flat reversing light approved for road use, with a carefully defined vertical beam, neutral 5000K color temperature and impact, water and dust resistant construction making it an excellent choice for low installation heights. Radar is only 9 cm wide and less than 2 cm thick, so it can be easily installed even in tight spaces. The light produces an excellent 2232 lumen light output for its size, which illuminates the terrain and obstacles behind it much better than standard vehicle reversing lights. Thanks to the innovative LED and reflector technology, Radar's beam is very flat vertically, but it opens up to 180° in width. The beam is therefore much wider than many other reversing lights of the same size on the market. The range of Radar's flat beam is 47 m @ 1 lux, so it offers the driver excellent visibility both to the sides and directly behind. Thanks to their small size, it is easy to install multiple lamps, e.g. in large vehicles, which means that the light output, beam width and range can be multiplied if necessary!\u003c\/p\u003e\n\u003cp\u003ePurelux Radar is equipped with a color temperature of 5000K that is easy on the eyes, making it the optimal choice for working in both low light and pitch darkness. The neutral color temperature is bright enough to create a clear contrast between the light and possible obstacles, but it is not too bright to dazzle the driver in poor weather conditions, such as rain or snow. This makes it much easier to observe terrain, obstacles behind the vehicle, and people and animals. In addition to its excellent lighting properties, Radar is very easy to install: the light comes with a low and durable mounting base that allows it to be mounted very close to the bottom of the rear bumper, making it easy to aim the light exactly where you need it.\u003c\/p\u003e\n\u003cp\u003ePurelux Radar is protected against water and dust according to the IP69K classification, and its robust body is made of an aluminum alloy that is extremely resistant to vibrations and impacts, and the surface is finished with a black powder coat that protects against corrosion, chemicals and UV radiation. The light can therefore be installed without worry under the rear bumper and near wheel arches and tires. The durable structure, small size and excellent light output for its size enable versatile use in various vehicles, from ATVs and passenger cars to construction machinery and heavy equipment. Radar is radio interference-protected according to the ECE R10 standard and approved as a reversing light according to the ECE R23 standard. The DT-2 connector in the power cord makes installation easy. Two-year (24-month) warranty!\u003c\/p\u003e\n\u003cp\u003eDelivery content\u003cbr\u003ePurelux Radar\u003cbr\u003ePower cord with DT-2 connector, 300 mm\u003cbr\u003eMounting rail\u003cbr\u003eRubber mounting backing\u003cbr\u003eInstallation and connection instructions (EN\/FI\/SE\/NO\/DK)\u003cbr\u003eSpecifications\u003cbr\u003eMake and model: Reverse light Purelux Radar\u003cbr\u003eIntended use: As a reversing light and work light in vehicles\/machinery\u003cbr\u003eOperating voltage: 9-36V\u003cbr\u003eManufacturer's declared power: 32 W\u003cbr\u003eMeasured by the light bulb: 24.2 W\u003cbr\u003eManufacturer's declared luminous efficacy: 2100 lm\u003cbr\u003eMeasured by the light source: 2232 lm\u003cbr\u003eRange measured by the light tower: 47 m @ 1 lux \/ 94 m @ 0.25 lux\u003cbr\u003eManufacturer's stated color temperature: 5000 K\u003cbr\u003eMeasured by Valostore: 5315 K\u003cbr\u003eMounting: Mounting bracket\u003cbr\u003eConnector: DT-2\u003cbr\u003eCable length: approx. 350 mm\u003cbr\u003eDimensions: 86 x 18 x 56 mm (Width x Height x Depth)\u003cbr\u003eHeight with mounting foot: 29 mm\u003cbr\u003eWeight: 120g\u003cbr\u003eIP rating: IP69K\u003cbr\u003eOperating temperature: -40°C - +60°C\u003cbr\u003eApprovals: EMC ECE R10, R23, R148, CE, RoHS\u003cbr\u003eWarranty: 24 months\u003c\/p\u003e","brand":"Purelux","offers":[{"title":"Default Title","offer_id":51685015322962,"sku":"HS20067","price":34.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/2833\/9608\/files\/IMG_70852.jpg?v=1759873155"},{"product_id":"purelux-radar-amber-strobe-r65-12-24v-86mm","title":"Purelux Radar Amber Strobe - R65 - 12\/24V - 86mm","description":"\u003cp\u003eA warning light with a very low and slender body, approved for road use according to the R65 standard, which can be installed, for example, under the rear bumper of a vehicle. The shock-, water- and dust-resistant construction copes with even challenging conditions and the bright flashing orange light attracts attention from afar. Suitable for both 12V and 24V systems.\u003c\/p\u003e\n\u003cp\u003ePurelux Radar R65 is a very small and sleek warning light approved for road use, with up to 6 different flashing functions. Thanks to the innovative lens and LED technology, the light opens up to 180°, sending a bright orange warning both directly behind the light and to both sides. Thanks to the flat and compact design, Radar is easy to install even in tight spaces and, for example, on the lower part of the bumper, making the light practically an inconspicuous part of the vehicle, but when it is switched on, the attention of those around you is guaranteed to be focused on the vehicle.\u003c\/p\u003e\n\u003cp\u003eRadar R65 is a warning light approved for road use according to the R65 Class 1 classification. The high light output combined with the bright orange flashing orange warning color creates a warning light that attracts attention from afar, even in bright daylight. The clearly distinguishable warning light increases the safety of both the driver of the vehicle and other people moving and working in the environment, allowing the driver to concentrate on working without fear of dangerous situations caused by lack of visibility.\u003c\/p\u003e\n\u003cp\u003ePurelux Radar R65 is protected against water and dust according to the IP69K classification, and its durable body is made of an aluminum alloy that is extremely resistant to vibrations and shocks, which is finished with a black powder coat that protects against corrosion, chemicals and UV radiation. The lamp can therefore be installed without worry under the rear bumper and, if necessary, also near the wheel arches and tires. The lamp's durable structure, small size and excellent light output for its size enable it to be used in a variety of vehicles, from ATVs and passenger cars to construction machinery and heavy equipment. The lamp is radio interference-protected according to the ECE R10 standard and approved for road traffic use according to the R65 Class 1 standard. The DT-2 connector on the power cord and the rubber mounting base included with the product make installation easy. Two-year (24-month) warranty!\u003c\/p\u003e\n\u003cp\u003eDelivery content\u003cbr\u003ePurelux Radar R65\u003cbr\u003ePower cord, 350 mm\u003cbr\u003eMounting rail\u003cbr\u003eRubber mounting backing\u003cbr\u003eInstallation and connection instructions (EN\/FI\/SE\/NO\/DK)\u003cbr\u003eSpecifications\u003cbr\u003eBrand and model: Reversing light Purelux Radar R65\u003cbr\u003eIntended use: As a warning and safety light for traffic and construction sites\u003cbr\u003eLight color: Orange\u003cbr\u003eOperating voltage: 9-36V\u003cbr\u003ePower measured by the light bulb: 18 W\u003cbr\u003eOperating modes: 6\u003cbr\u003eDimensions: 86 x 18 x 56 mm (Width x Height x Depth)\u003cbr\u003eHeight with mounting foot: 29 mm\u003cbr\u003eWeight: 120g\u003cbr\u003eCable length: 350 mm\u003cbr\u003eConnector: DT-2\u003cbr\u003eMaterial: Frame made of aluminum and plastic, lens made of polycarbonate\u003cbr\u003eIP rating: IP69K\u003cbr\u003eOperating temperature: -40°C - +60°C\u003cbr\u003eApprovals: EMC: ECE R10, R65 Class 1, CE, RoHS\u003cbr\u003eWarranty: 24 months\u003cbr\u003eQuick guide\u003cbr\u003eCoupling\u003c\/p\u003e\n\u003cp\u003eRed: Power (+)\u003cbr\u003eBlack: Ground (-)\u003cbr\u003eWhite: Synchronization \/ Warning light functions\u003cbr\u003eInstructions\u003c\/p\u003e\n\u003cp\u003eSynchronization: Synchronize multiple warning lights by connecting their white wires together\u003cbr\u003eWarning light pattern: Connect the white wire to power (+) for less than 1 second.\u003cbr\u003eReset: Connect the white wire to power (+) for at least 3 seconds to return directly to warning light pattern #1\u003cbr\u003eAlternating Flash: Reset the light group and connect the white wire to power (+) for 1 second to alternate the flashing of the light groups. Two lights can be set to flash alternately at a time.\u003c\/p\u003e","brand":"Purelux","offers":[{"title":"Default Title","offer_id":51685025022290,"sku":"HS20608","price":34.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/2833\/9608\/files\/IMG_70763.jpg?v=1759873634"},{"product_id":"purelux-heavy-duty-underglow-rgbw-kit-12-24v","title":"Purelux Heavy Duty Underglow RGBW Kit - 12\/24V","description":"\u003cp\u003eA truly stunning RGBW light set that can be controlled via a mobile app on your phone. Up to 16 million colors to choose from, adjustable brightness, multiple light patterns, music function and much more! An excellent product for tuning enthusiasts!\u003c\/p\u003e\n\u003cp\u003eThe Purelux Underglow RGBW Kit Rock Light Kit is a high-quality and truly stunning multi-color light set that can be controlled via a mobile phone application, which can be installed both inside and outside the vehicle, and its wide operating voltage range (9-32 V) allows installation in the most common systems. The set comes with six light units, all of which connect to the same control unit with a waterproof \"Plug \u0026amp; Play\" connection. This means that only one self-made electrical connection is required from the car battery to the lights. The power cable for each light unit is approx. 3 meters long, so they can be easily placed on both sides of the car, front and back. The control unit of the set works via Bluetooth, and requires at least Android 4.3 \/ IOS 7.0 operating system. Bluetooth automatically searches for devices within range (approx. 15 m), which allows multiple light sets to be controlled simultaneously! Rubber mounting bases suitable for both flat and round surfaces are included. These make the installation both neat and durable. Mounting brackets reduce, for example, vibrations generated when driving and transmitted to the lights.\u003c\/p\u003e\n\u003cp\u003eThe Purelux Underglow Kit light series offers a huge range of colours, with over 16 million colours to choose from. The colour tone and brightness can be adjusted to your own preference via the very user-friendly app (HappyLightning) that can be downloaded to your smart device. The app offers several different features for adjusting the lights, and there are, for example, numerous options for selecting a light pattern. The pre-created light patterns in the app include a flashing function that alternates between two colours and a \"Fade\" that elegantly fades between seven colours. The app also features sound, timing and music functions, as well as motion detection. The sound function automatically changes the colour and brightness of the lights based on external sound via the smart device's microphone. The timing function allows the lights to be set to operate on a specific date and time. The motion sensor allows the colour of the lights to be changed by shaking the smart device. The music function automatically changes the colour of the lights to the beat of music played from the smart device's internal memory!\u003c\/p\u003e\n\u003cp\u003eAluminum-framed light units, waterproof Plug \u0026amp; Play connections and IP67 protection rating ensure functionality even in harsh conditions, and a well-installed light set won't be startled by a small thing! An excellent product for tuning enthusiasts! Extremely suitable for, for example, a show car to bring additional visibility.\u003c\/p\u003e\n\u003cp\u003eNote! By law, so-called \"chassis lights\" installed on the chassis of a vehicle are prohibited while driving. The product is not E-approved and should not be used in normal road traffic. To be used outside of road traffic, e.g. in Off-Road vehicles.\u003c\/p\u003e\n\u003cp\u003eExamples of installation sites\u003c\/p\u003e\n\u003cp\u003eVehicle interior and footwells\u003cbr\u003eVehicle chassis and sides\u003cbr\u003eVehicle grille and wheel arches\u003cbr\u003eFor the chassis light of a show car\u003cbr\u003eMopeds, ATVs, other Enduro vehicles\u003cbr\u003eDelivery content\u003cbr\u003e6 x RGBW light unit\u003cbr\u003eControl unit, 6 outputs\u003cbr\u003e12 x mounting backgrounds\u003cbr\u003e6 x Flat\u003cbr\u003e6 x Convex\u003cbr\u003eFastening bolts and nuts\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eInstructions for use (FI, SE, NO)\u003cbr\u003eFeatures\u003cbr\u003eLight pattern and speed adjustment\u003cbr\u003eMultiple light pattern options to choose from, slider to change speed\u003cbr\u003eVoice function\u003cbr\u003eThe color and brightness of the LED lights change based on external sound through the smart device's microphone\u003cbr\u003eTimer function\u003cbr\u003eLights can be scheduled to operate on a specific date and time\u003cbr\u003eMotion detection\u003cbr\u003eSwing the device sideways to change the light colors\u003cbr\u003eMusic function\u003cbr\u003eThe LED lights change color to the beat of the music played from the smart device's internal memory\u003cbr\u003eSpecifications\u003cbr\u003eProduct: Purelux Underglow RGBW Kit\u003cbr\u003eIntended use: as an LED light kit in vehicles, as a chassis light in a show car, etc.\u003cbr\u003eOperating voltage range: 9-32 V (DC)\u003cbr\u003ePower consumption measured by Valostore: 16.7W @ 12V \/ 17.8W @ 24V\u003cbr\u003eColor scheme: RGBW (Red \/ Green \/ Blue \/ White)\u003cbr\u003eMin. smart device operating system: Android 4.3 \/ IOS 7.0\u003cbr\u003eConnection type: Bluetooth 4.0 (BLE)\u003cbr\u003eRange: 15 meters\u003cbr\u003eLamp head dimensions: 72 x 40 x 10 mm (Width\/Height\/Depth)\u003cbr\u003ePower distributor dimensions: 95 x 46 x 20 mm (Width\/Height\/Depth)\u003cbr\u003eLamp head cable length: 3000 mm\u003cbr\u003eCable length from distributor to battery: 550 mm\u003cbr\u003eOutput cable length: 150 mm\u003cbr\u003eIP rating: IP67\u003cbr\u003eApprovals: CE\u003cbr\u003eWarranty: 12 months\u003c\/p\u003e","brand":"Purelux","offers":[{"title":"Default Title","offer_id":51896776032594,"sku":"HS9797-17256","price":124.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/2833\/9608\/files\/IMG_7644.jpg?v=1761868048"},{"product_id":"on-off-hd-rocker-switch-purelux","title":"On\/Off HD Rocker Switch - Purelux","description":"\u003cp\u003eConvenient color-coded push-button switch with LED backlight for controlling auxiliary and work lights. On\/off function. Current rating 30A, can be connected to power or excitation cable.\u003c\/p\u003e\n\u003cp\u003ePurelux On\/Off HD Rocker Switch is a handy on\/off switch with LED light, e.g. for controlling auxiliary and work lights. With the switch, e.g. auxiliary lights can be installed to operate via a switch alone, when the switch is connected to the power or ground wire. The switch can also be connected to a relay wiring harness so that the auxiliary lights can be switched off, even if the vehicle's own high beams remain on. In such a situation, it is worth installing the switch on the wiring harness's excitation wire, so that the auxiliary light can be switched off from the switch and the vehicle's own high beams still remain in use (an excellent feature, e.g. when encountering oncoming traffic: the auxiliary lights can be switched off first and the high beams only a little later). However, with the above connection, the auxiliary lights will not come on if the car's own high beams are not on, i.e. they will operate at the same time as the car's own high beams, unless the auxiliary high beams are switched off separately from the switch.\u003c\/p\u003e\n\u003cp\u003eThe Purelux On\/Off HD Rocker Switch is equipped with a handy LED backlight, making it easy to see even in a dark cockpit (the light is always on when the switch is in the ON position). The switch is available in three different color options: red, orange or white, so you can choose different colored switches to control different functions, for example, or just choose a color according to your preference.\u003c\/p\u003e\n\u003cp\u003eSpecifications\u003cbr\u003eWhat: On\/off switch Purelux HD Rocker Switch\u003cbr\u003eIntended use: Control of auxiliary and work lights\u003cbr\u003eCurrent rating: 30A\u003cbr\u003eColor: White, amber or red\u003cbr\u003eSwitch has LED background light\u003c\/p\u003e","brand":"Purelux","offers":[{"title":"Default Title","offer_id":51896790712658,"sku":null,"price":6.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/2833\/9608\/files\/IMG_7646.jpg?v=1761869026"},{"product_id":"on-off-on-hd-dial-switch-purelux","title":"On\/Off\/On HD Dial Switch - Purelux","description":"\u003cp\u003eOn\/Off\/On switch with LED backlight for switching on additional and work lights, among other things. The switch allows for controlling two or even four different additional lights from the same location. Current rating 3A.\u003c\/p\u003e\n\u003cp\u003eThe Purelux On\/Off\/On HD Dial Switch is a handy on\/off\/on switch for controlling, for example, auxiliary and work lights. By connecting the switch to the excitation wire of the auxiliary light relay harness, the auxiliary light can be operated solely via the switch, so that the auxiliary lights can be turned off from the switch, even if the vehicle's own high beams are still on. This is a useful feature, for example, when meeting oncoming traffic, as the auxiliary lights can be turned off first and the vehicle's own high beams only a little later. With the above connection, however, the auxiliary lights will not turn on if the car's own high beams are not on, i.e. they will operate at the same time as the car's own high beams, unless the auxiliary high beams are separately turned off from the switch.\u003c\/p\u003e\n\u003cp\u003eThanks to the On\/Off\/On functionality, the switch allows, for example, the control of two (or even four) different additional lights via the same switch. The outermost pins are power and ground for the switch's LED light.\u003c\/p\u003e\n\u003cp\u003eThe switch itself is connected as follows: the lowest pins (right and left) are for continuous current (e.g. excitation current). When the switch is turned to the left, it allows current to pass through to the top pins. The right pins are connected, and the left pins are connected. When the switch is turned to the right again, current is passed through to the middle pins (left to left, right to right). This way, for example, the roof and bow lights can be switched on at different times, allowing the lighting to be controlled according to the circumstances.\u003c\/p\u003e\n\u003cp\u003eSpecifications\u003cbr\u003eProduct: On\/Off\/On switch Purelux HD Dial Switch\u003cbr\u003ePurpose: Control of auxiliary and work lights\u003cbr\u003eCurrent rating: 3A\u003cbr\u003eSwitch has LED background light\u003c\/p\u003e","brand":"Purelux","offers":[{"title":"Default Title","offer_id":51896796610898,"sku":null,"price":11.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/2833\/9608\/files\/IMG_7649.jpg?v=1761869193"},{"product_id":"5ft-purelux-flash-1600-gen2-roof-warning-beacon-bar-with-controller","title":"5ft Purelux Flash 1600 Gen2 Roof Warning Beacon Bar with Controller","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eA modern beacon panel designed for demanding professional use, equipped with, among other things, 12 flashing functions, a warning light approved for road use, a shock-, water- and dust-resistant construction, and the best possible radio interference protection. Suitable for both 12V and 24V systems.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eR65 approved warning light\u003cbr\u003eSeparate day and night spaces (R65 Class 2)\u003cbr\u003e12 different flashing functions\u003cbr\u003eSeparate Cruise mode\u003cbr\u003e360° lighting\u003cbr\u003eHighest possible tightness rating\u003cbr\u003eThe best radio interference protection on the market\u003cbr\u003eGorgeous dark profile\u003cbr\u003ePurelux Flash 1600 Gen2 is a new generation warning light panel with an extremely low and aerodynamic profile that meets the quality standards of demanding work in every area. The panel is equipped with, among other things, 12 different flashing functions, a warning light approved for road use according to the R65 standard, an impact, water and dust resistant structure, the best possible radio interference protection (CISPR25 Class 5) and a modern dark appearance. In addition, the panel also has a Cruise mode, which is often needed in mines, for example, where the light can be lit evenly without flashing. The panel spreads the light 360° around it, so it increases the safety of everyone moving around the vehicle. In addition, it has both day and night operating modes in accordance with the ECE R65 Class 2 classification (the light is brighter in day mode and dimmer in night mode), which means that the light does not dazzle anyone at night, but still attracts attention during daylight hours.\u003c\/p\u003e\n\u003cp\u003eIn terms of size, power and functions, the Flash 1600 Gen2 is an excellent warning light for trucks, trailers and larger machinery. If desired, several Flash Gen2 beacon panels can also be synchronized to work with each other, which provides uniform lighting even on larger vehicles where several lights are installed.\u003c\/p\u003e\n\u003cp\u003eThe panel's significantly lower profile than a normal beacon and short skids ensure an aerodynamic and stylish installation that can withstand both speed and gaze. The panel's thin structure reduces air resistance and reduces wind noise, and the mounting skids allow the panel to rise slightly above the installation surface, allowing airflow to pass under the panel. The smoke-gray and impact-resistant polycarbonate lens wraps around the sides of the beacon as well as the top, giving the light a stunning visual appearance even when turned off.\u003c\/p\u003e\n\u003cp\u003eDelivery content\u003cbr\u003eBeacon panel Purelux Flash 1600 Gen2\u003cbr\u003eMounting rails\u003cbr\u003eMounting bolts\u003cbr\u003ePower cable without connector, 5000 mm\u003cbr\u003eInstallation instructions (FI\/EN\/SE\/NO\/DK)\u003cbr\u003eSpecifications\u003cbr\u003eBrand and model: Purelux Flash 1600 Gen2\u003cbr\u003eIntended use: As a warning and safety light in cars \/ work machines, etc.\u003cbr\u003eOperating voltage: 10-36V\u003cbr\u003eManufacturer's stated current consumption: 13.5A @ 12V \/ 6.79A @ 24V\u003cbr\u003eManufacturer's declared power: 163 W\u003cbr\u003eMounting: Mounting foot set, mounting bolts\u003cbr\u003eConnector: No connector, straight wires\u003cbr\u003eCable length: 500 cm\u003cbr\u003eDimensions: 1584 x 35 x 240 mm (Width\/Height\/Depth)\u003cbr\u003eHeight with skids: 77 mm\u003cbr\u003eIP rating: IP69K\u003cbr\u003eApprovals: EMC: ECE R10, R65 Class 2, CISPR25 Class 5, CE, RoHS\u003cbr\u003eOperating temperature: -40°C - +50°C\u003cbr\u003eWarranty: 24 months\u003cbr\u003eOther: 12 different operating modes, orange light, very low profile, 360° illumination\u003cbr\u003eImporter: Handshake.fi\u003cbr\u003eOperating modes\u003cbr\u003eSingle flash (R65 Class 2 )\u003cbr\u003eFast double flash (R65 Class 2)\u003cbr\u003eSlow double flash\u003cbr\u003eMulti-flash\u003cbr\u003eCombo single\/double flash output\u003cbr\u003eCombo single\/multiple flash\u003cbr\u003eBreathe\u003cbr\u003eTurn signal left\u003cbr\u003eRight turn signal\u003cbr\u003eArrow from the center\u003cbr\u003eCruise (connected with a separate wire, see quick guide)\u003cbr\u003eR65 night mode (connected with a separate wire, see quick guide)\u003cbr\u003eQuick guide\u003cbr\u003eCoupling\u003c\/p\u003e\n\u003cp\u003eRed: Power (+)\u003cbr\u003eBlack: Ground (-)\u003cbr\u003eYellow: Warning light functions and synchronization\u003cbr\u003eBlue: Warning light #1 (R65 Night Mode)\u003cbr\u003eWhite: Cruise (Steady light)\u003cbr\u003eBrown: Traffic control, left\/right\u003cbr\u003eHazard light functions: Touch the red wire with the yellow wire for less than 1 second to switch the flashing functions.\u003c\/p\u003e\n\u003cp\u003eSynchronization: Connect the yellow wire of each luminaire to be synchronized.\u003c\/p\u003e\n\u003cp\u003eFlashing function #1 (R65): Touch the red wire with the blue wire for less than 1 second.\u003c\/p\u003e\n\u003cp\u003eNight mode: Touch the red wire with the blue wire for 5 seconds. The light brightness will decrease by 50% in all flashing modes (does not apply to steady light). To disable night mode, disconnect the wire.\u003c\/p\u003e\n\u003cp\u003eSteady light: Connect the white wire to the red wire. To disable steady light, disconnect the wire. The warning panel will return to the last flashing function used.\u003c\/p\u003e\n\u003cp\u003eTraffic control: Touch the red wire with the brown wire for 1 second. The light activates the left turn signal. Touch the red wire with the brown wire for 5 seconds to activate the right turn signal.\u003c\/p\u003e","brand":"Purelux","offers":[{"title":"Default Title","offer_id":51896821350738,"sku":null,"price":529.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/2833\/9608\/files\/IMG_46912.jpg?v=1748737133"},{"product_id":"6ft-purelux-flash-1800-gen2-roof-warning-beacon-bar-with-controller","title":"6ft Purelux Flash 1800 Gen2 Roof Warning Beacon Bar with Controller","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eA modern beacon panel designed for demanding professional use, equipped with, among other things, 12 flashing functions, a warning light approved for road use, a shock-, water- and dust-resistant construction, and the best possible radio interference protection. Suitable for both 12V and 24V systems.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eR65 approved warning light\u003cbr\u003eSeparate day and night modes (R65 Class 2)\u003cbr\u003e12 different flashing functions\u003cbr\u003eSeparate Cruise mode\u003cbr\u003e360° lighting\u003cbr\u003eHighest possible IP rating\u003cbr\u003eThe best radio interference protection on the market\u003cbr\u003eStylish dark profile\u003cbr\u003eThe Purelux Flash 1800 Gen2 is a new generation warning light panel with an ultra-low and aerodynamic profile that meets the quality standards of demanding work environments in every aspect. The panel is equipped with 12 different flashing functions, a warning light approved for road use according to the R65 standard, an impact, water and dust resistant construction, the best possible radio interference protection (CISPR25 Class 5) and a modern dark appearance. In addition, the panel also features the much-needed Cruise mode, which allows the light to burn steadily without flashing, for example in mines. The panel spreads the light 360° around the vehicle, increasing the safety of everyone around the vehicle. In addition, it has both day and night modes (brighter in daytime and dimmer at night), in accordance with ECE R65 Class 2, so that the light does not dazzle at night, but still attracts attention in bright light.\u003c\/p\u003e\n\u003cp\u003eIn terms of size, power and functions, the Flash 1800 Gen2 is an excellent warning light for trucks, trailers and various types of machinery. If desired, several Flash Gen2 beacon panels can also be synchronized to work with each other, which creates a uniform lighting even on larger vehicles that require more lights.\u003c\/p\u003e\n\u003cp\u003eThe panel's significantly lower profile than a normal beacon and short skids ensure an aerodynamic and stylish installation that can withstand both speed and gaze. The panel's thin structure reduces air resistance and reduces wind noise, and thanks to the mounting skids, the panel rises slightly from the installation surface, allowing airflow to pass under the panel. The smoke-gray and impact-resistant polycarbonate lens wraps around the sides of the beacon as well as its top, giving the light a stunning visual appearance even when turned off.\u003c\/p\u003e\n\u003cp\u003eDelivery content\u003cbr\u003eBeacon panel Purelux Flash 1800 Gen2\u003cbr\u003eMounting rails\u003cbr\u003eMounting bolts\u003cbr\u003ePower cord without connector, 5000 mm\u003cbr\u003eInstallation instructions (FI\/EN\/SE\/NO\/DK)\u003cbr\u003eSpecifications\u003cbr\u003eBrand and model: Purelux Flash 1800 Gen2\u003cbr\u003eIntended use: As a warning and safety light in cars \/ work machines, etc.\u003cbr\u003eOperating voltage: 10-36V\u003cbr\u003eManufacturer's stated current consumption: 15.5A @ 12V \/ 6.2A @ 24V\u003cbr\u003eManufacturer's declared power: 186 W\u003cbr\u003eMounting: Mounting foot set, mounting bolts\u003cbr\u003eConnector: No connector, straight wires\u003cbr\u003eCable length: 500 cm\u003cbr\u003eDimensions: 1784 x 35 x 240 mm (Width\/Height\/Depth)\u003cbr\u003eHeight with skids: 77 mm\u003cbr\u003eWeight (with legs): 10,500 g\u003cbr\u003eIP rating: IP69K\u003cbr\u003eApprovals: EMC: ECE R10, R65 Class 2, CISPR25 Class 5, CE, RoHS\u003cbr\u003eOperating temperature: -40°C - +50°C\u003cbr\u003eWarranty: 24 months\u003cbr\u003eOther: 12 different operating modes, orange light, Ultra low profile, 360° illumination\u003cbr\u003eImporter: Handshake.fi\u003cbr\u003eOperating modes\u003cbr\u003eSingle flash (R65 Class 2 )\u003cbr\u003eFast double flash (R65 Class 2)\u003cbr\u003eSlow double flash\u003cbr\u003eMulti-flash\u003cbr\u003eCombo single\/double flash output\u003cbr\u003eCombo single\/multiple flash\u003cbr\u003eBreathe\u003cbr\u003eLeft arrow\u003cbr\u003eRight arrow\u003cbr\u003eArrow from the center\u003cbr\u003eCruise (connected with a separate wire, check quick guide)\u003cbr\u003eR65 Night mode (connected with a separate wire, check quick guide)\u003cbr\u003eQuick guide\u003cbr\u003eCoupling\u003c\/p\u003e\n\u003cp\u003eRed: Power (+)\u003cbr\u003eBlack: Ground (-)\u003cbr\u003eYellow: Warning light functions and synchronization\u003cbr\u003eBlue: Warning light #1 (R65 Night Mode)\u003cbr\u003eWhite: Cruise light\u003cbr\u003eBrown: Traffic control, left\/right\u003cbr\u003eHazard light functions: Touch the red wire with the yellow wire for less than 1 second to switch the flashing functions.\u003c\/p\u003e\n\u003cp\u003eSynchronization: Connect the yellow wire of each luminaire to be synchronized.\u003c\/p\u003e\n\u003cp\u003eFlashing function #1 (R65): Touch the red wire with the blue wire for less than 1 second.\u003c\/p\u003e\n\u003cp\u003eNight mode: Touch the red wire with the blue wire for 5 seconds. The light brightness will decrease by 50% in all flashing modes (does not apply to steady light). To disable night mode, disconnect the wire.\u003c\/p\u003e\n\u003cp\u003eSteady light: Connect the white wire to the red wire. To disable steady light, disconnect the wire. The warning panel will return to the last flashing function used.\u003c\/p\u003e\n\u003cp\u003eTraffic control: Touch the red wire with the brown wire for 1 second. The light activates the left turn signal. Touch the red wire with the brown wire for 5 seconds to activate the right turn signal.\u003c\/p\u003e","brand":"Purelux","offers":[{"title":"Default Title","offer_id":51896828264786,"sku":null,"price":569.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/2833\/9608\/files\/IMG_46912.jpg?v=1748737133"},{"product_id":"15-purelux-flash-400-gen2-roof-warning-beacon-bar","title":"15\" Purelux Flash 400 Gen2 Magnetic Roof Warning Beacon Bar (Lighter Plug)","description":"\u003cp\u003eA modern beacon panel designed for demanding professional use, equipped with, among other things, 9 flashing functions, a warning light approved for road use, a shock-, water- and dust-resistant construction, and the best possible radio interference protection. Works directly from the cigarette lighter socket!\u003c\/p\u003e\n\u003cp\u003eWorks from the cigarette lighter socket\u003cbr\u003eMagnetic mounting\u003cbr\u003eR65 approved warning light\u003cbr\u003e9 different flashing functions\u003cbr\u003e360° lighting\u003cbr\u003eHighest possible IP rating\u003cbr\u003eThe best radio interference protection on the market\u003cbr\u003eStylish dark profile\u003cbr\u003eThe Purelux Flash 400 Gen2 is a new generation warning light panel with a very low and aerodynamic profile that meets the quality standards of demanding work in every area. The panel is equipped with, among other things, 9 different flashing functions, a warning light approved for road use according to the R65 standard, a shock-, water- and dust-resistant structure, the best possible radio interference protection (CISPR25 Class 5) and a modern dark appearance. Unlike many other beacon panels, the Flash 400 Gen2 is also very easy to install, as it is powered directly from the vehicle's cigarette lighter socket and is attached using magnetic feet. This means that the light does not require any connections to be put into operation, and there is no need to drill holes in the vehicle for mounting bolts! The Purelux Flash 400 Gen2 is the perfect choice for, for example, maintenance and control vehicles and all applications where the beacon is not needed constantly, but you want to remove it whenever you are not using it. The Flash 400 Gen2 spreads light 360° around it, increasing the safety of everyone around the vehicle.\u003c\/p\u003e\n\u003cp\u003eThe panel's significantly lower profile than a normal beacon and short skids ensure an aerodynamic and stylish installation that can withstand both speed and gaze. The panel's thin structure reduces air resistance and reduces wind noise, and the mounting skids allow the panel to be slightly raised from the mounting surface, allowing airflow to pass under the panel. The smoke-gray and impact-resistant polycarbonate lens wraps around the sides of the beacon as well as the top, giving the light a stunning visual appearance even when turned off.\u003c\/p\u003e\n\u003cp\u003eDelivery content\u003cbr\u003eBeacon panel Purelux Flash 400 Gen2\u003cbr\u003eMagnetic skates\u003cbr\u003ePower cord with cigarette lighter plug, 4000 mm\u003cbr\u003eInstallation instructions (FI\/EN\/SE\/NO\/DK)\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eSpecifications\u003cbr\u003eBrand and model: Purelux Flash 400 Gen2\u003cbr\u003eIntended use: As a warning and safety light in cars \/ work machines, etc.\u003cbr\u003eOperating voltage: 10-36V\u003cbr\u003eManufacturer's stated current consumption: 6.5A @ 12V \/ 2.85A @ 24V\u003cbr\u003eManufacturer's declared power: 78 W\u003cbr\u003eMounting: Magnetic mounts\u003cbr\u003eConnector: Cigarette lighter plug\u003cbr\u003eCable length: 400 cm\u003cbr\u003eDimensions: 384 x 35 x 240 mm (Width\/Height\/Depth)\u003cbr\u003eHeight with skids: 77 mm\u003cbr\u003eWeight (with legs): 3000 g\u003cbr\u003eIP rating: IP69K\u003cbr\u003eApprovals: EMC: ECE R10, R65 Class 1, CISPR25 Class 5, CE, RoHS\u003cbr\u003eOperating temperature: -40°C - +50°C\u003cbr\u003eWarranty: 24 months\u003cbr\u003eOther: 9 different operating modes, orange light, Ultra low profile, 360° illumination\u003cbr\u003eImporter: Handshake.fi\u003cbr\u003eOperating modes\u003cbr\u003eSingle flash (R65 Class 1)\u003cbr\u003eFast double flash (R65 Class 1)\u003cbr\u003eSlow double flash\u003cbr\u003eMulti-flash\u003cbr\u003eCombo single\/double flash output\u003cbr\u003eCombo single\/multiple flash\u003cbr\u003eBreathe\u003cbr\u003eLeft arrow\u003cbr\u003eRight arrow\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eQuick guide\u003cbr\u003eOperation: The lamp is connected to the vehicle's cigarette lighter socket. The socket has an On\/Off switch and a separate Mode switch for changing operating modes. The operating modes change with each press when the lamp is on.\u003c\/p\u003e","brand":"Purelux","offers":[{"title":"Default Title","offer_id":51896847040850,"sku":null,"price":194.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/2833\/9608\/files\/IMG_46912.jpg?v=1748737133"},{"product_id":"switch-panel-with-fuse-relay-box-8-gang-bluetooth-app-control-remote-control-rgb-multi-colour-backlight-12v-24v","title":"Switch Panel with Fuse \/ Relay Box - 8 Gang - Bluetooth App Control - Remote Control - RGB Multi Colour Backlight - 12v\/24v","description":"\u003cp\u003eSwitch panel Purelux Multi-switch Dashboard Controller Bluetooth\/RF, 10-30V\u003cbr\u003eA very versatile switch panel that allows you to control up to 8 different electrical devices either from the switch panel itself, using the included wireless remote control, or by utilizing a mobile application installed on your smartphone! Excellent for controlling the lights of a construction machine, truck, or SUV, for example.\u003c\/p\u003e\n\u003cp\u003eThe Purelux Multi-Switch Dashboard Controller is a very versatile and convenient switch panel that allows you to control up to eight different electrical devices (lights, beacons, engine fan or even a seat heater) either directly from the switch panel, from the supplied wireless remote control or from a mobile application installed on your smartphone. The switch panel can be installed, for example, in the cabin of a vehicle, so that the lights\/electrical devices installed behind it can be easily operated while working. In addition, the wireless remote control provided by the remote control and mobile application allows adjustment even in situations where the switch panel is not within reach, for example from outside the vehicle. In the phone application, it is also possible to create lighting groups from devices connected to the switch panel, so that the lamps connected behind certain buttons can be programmed to turn on at the same time.\u003c\/p\u003e\n\u003cp\u003eThe switch panel  allows, for example, the front, rear and side work lights and the beacon to be controlled separately on the machine, and the switches for all lights are conveniently located in the same place. The lights can be turned on and off individually, and in addition, the switch in the middle can be used to turn off all devices installed behind the panel at the same time. All lights (and other devices) connected to the switch panel can be turned on either continuously (i.e. on with a button and off with another click), momentarily (the light is on when the button is held down) or flashing.\u003c\/p\u003e\n\u003cp\u003eThe switch panel has an RGB backlight that automatically adjusts to the ambient brightness, and the color of which can be selected to be pleasing to the eye. The backlight can also be turned off by pressing the \"Mode\" switch once. A total of 45 different image stickers and five black, self-cut stickers for marking the switches are included. This way, the switch intended for each different device or light can be marked to prevent confusion. The symbol on the switch shines clearly even in the dark thanks to the backlight.\u003c\/p\u003e\n\u003cp\u003eThe switch panel can be used to turn all lights connected behind it on either steady, momentarily or flashing. The function can be changed by pressing the Mode button in the middle of the panel twice quickly, after which the LED indicators above the switch will start flashing. Then press the switch whose function you want to change. This way, for example, a separate flasher relay is not needed to make the lights flash! In addition, the panel is equipped with a handy memory function, meaning it turns on the lights in the same mode that was in use before the current was turned off. \u003c\/p\u003e\n\u003cp\u003eIn addition to the switch panel, the lights\/devices installed behind it can be controlled with the included wireless remote control. The remote control has its own buttons for all eight outputs, and the operating mode for each button can be defined on the switch panel. The lights can also be controlled remotely via Bluetooth using a mobile application. To use the application, you need to download the SwitchPanel mobile application from either the Google Play store or the Apple App Store. In the mobile application, devices installed behind the switch panel can be controlled in the same way as from the switch panel, but remotely. In addition, it is really easy to form lighting groups from the lights, which allows you to easily control several lights simultaneously.\u003c\/p\u003e\n\u003cp\u003eNote! The switch panel has a power rating of 600W @12V and 1200W @24V. The total power of electrical devices that are switched on at the same time must therefore be 600W (or 1200W). Circuits 1 and 2 can handle a maximum of 30A, circuits 3 and 4 20A, circuits 5 and 6 10A and circuits 7 and 8 5A. Each circuit has its own fuse in the control box.\u003c\/p\u003e\n\u003cp\u003eTip! If you need a spare battery for the remote control, you can find one here: CR2477 battery VARTA .\u003c\/p\u003e\n\u003cp\u003eDelivery content\u003cbr\u003eSwitch panel (8 switches)\u003cbr\u003eFuse box\u003cbr\u003eResidual current device (60A)\u003cbr\u003eRemote control\u003cbr\u003eRemote control battery (CR2477 3V)\u003cbr\u003eAntenna\u003cbr\u003e4-pole cable\u003cbr\u003e2-pole cable\u003cbr\u003ePower cable\u003cbr\u003e2 different mounting brackets for the switch panel\u003cbr\u003eFuse box mounting bracket\u003cbr\u003e50 marking stickers for marking buttons\u003cbr\u003eScrew set\u003cbr\u003eCable ties\u003cbr\u003eUser manual (FI\/SV\/NO\/DK\/EN)\u003cbr\u003eSpecifications\u003cbr\u003eWhat: Switch panel Purelux Multi-Switch Dashboard Controller Bluetooth\/RF, 10-30V\u003cbr\u003eIntended use: operating up to 8 electrical devices from the same switch panel\u003cbr\u003eAllows, for example, the use of additional lights, side and rear work lights and beacon panel separately\u003cbr\u003eOperating voltage: 10-30 V\u003cbr\u003ePower rating: 600W @12V, 1200W @24V\u003cbr\u003eMaximum current: 60 A\u003cbr\u003eIncludes 50 marking stickers\u003cbr\u003eIncludes remote control + battery (CR2477)\u003cbr\u003eBluetooth connection: max 10 m\u003cbr\u003eRadio frequency connection: max 30 m\u003cbr\u003eSwitch panel size: 116 x 66 x 14 mm (W x H x D)\u003cbr\u003eIP rating: IP65\u003cbr\u003eOperating temperature: -40 - +105°C\u003cbr\u003eApprovals: CE marked\u003cbr\u003eOther: The panel has a memory function, can also be controlled with the SwitchPanel mobile app (Bluetooth)\u003cbr\u003eWarranty: 12 months\u003cbr\u003eConnection instructions\u003cbr\u003ePower: Connect the main power cable (Red) from the vehicle battery or other fixed power point to the residual current device, and from the residual current device to the fuse box at the attachment point marked in red. Connect one end of the ground cable (Black) to e.g. the vehicle frame or other fixed ground point, and the other end to the ground point marked in black in the fuse box.\u003c\/p\u003e\n\u003cp\u003eConnecting the switch panel: Connect one end of the supplied 4-pin cable to the switch panel and the other end to the marked plug in the fuse box.\u003c\/p\u003e\n\u003cp\u003eExcitation current: The fuse box can be supplied with excitation current depending on the desired use: if you do not want the devices installed behind the switch to work without the vehicle being running, it is advisable to connect the excitation current cable to, for example, the cigarette lighter or the base of the ignition switch. If you want the devices connected to the panel to be used even when the vehicle is off, it is advisable to connect the excitation current directly to, for example, the positive pole of the car battery or another fixed power point. Connect the 2-pin excitation current cable plug to the fuse box.\u003c\/p\u003e\n\u003cp\u003eNote! The red LED indicator next to the fuse indicates if the fuse has blown.\u003c\/p\u003e\n\u003cp\u003eConnecting lights (or other electrical devices): Connect the desired lights to outlets 1-8 in the fuse box. Note the maximum current rating of each circuit, and connect the device to be connected to an outlet with the appropriate power.\u003c\/p\u003e\n\u003cp\u003eValostore's tip: If the power of the lights\/devices exceeds the maximum power of the controller (600W @12V, 1200W @24V), the controller can also control a relay, in which case the current required by the lights (or some of the lights) goes through the relay\/relay wiring harness, and only the excitation current comes from the controller. In this case, instead of the power wire of the light, only the excitation wire of the relay\/relay wiring harness is connected to the output (1-8) coming from the controller.\u003c\/p\u003e\n\u003cp\u003eThis way, some of the lights can be connected behind their own relay wiring harness . In this case, the current to the lights runs through the relay, and they do not require power from the controller, and the controller only controls the relay's excitation.\u003c\/p\u003e\n\u003cp\u003eAdditional features of the switch panel - in addition to continuous power, the switches can be programmed to operate as a one-time flash button or a continuous flashing strobe function : To change the operating mode, follow these instructions: Step 1: Turn on the switch panel. Step 2: Press the “Mode” button twice quickly and the LED indicators above the switches will start flashing. Step 3: Press the switch whose operation you want to change. Step 4: Test the operation. If the operating mode did not change, turn on the switch panel again and repeat steps 1-3.\u003c\/p\u003e\n\u003cp\u003ePairing and using the remote control: Press the ON\/OFF button and one of the eight operation buttons on the switch panel at the same time, the ON\/OFF button indicator will turn red. Then press the ON\/OFF button on the remote control, the button indicators on the switch panel will flash 3 times, indicating that the pairing is successful. The remote control can control all 8 outputs, the output operating modes must be selected on the switch panel.\u003c\/p\u003e\n\u003cp\u003eInstalling the mobile app : Download the SwitchPanel app from either the Google Play Store, the Apple App Store, or by using the QR code found on the packaging and on the last page of the user manual.\u003c\/p\u003e","brand":"Purelux","offers":[{"title":"Default Title","offer_id":51969125318994,"sku":"HS20221","price":209.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/2833\/9608\/files\/IMG_77742.jpg?v=1762646409"},{"product_id":"number-plate-mounting-bracket-for-2-spot-lights-or-light-bar","title":"Number Plate Mounting Bracket for 2 Spot Lights or Light Bar - Purelux","description":"\u003cp\u003eA sturdy auxiliary light holder for mounting two round auxiliary lights or one led bar behind the Purelux license plate. The bracket is installed discreetly behind the car's license plate, so that nothing is visible from the bracket itself except the mounting brackets to which the auxiliary lights are attached. The bracket can be installed either so that the lights come above the license plate, or alternatively, e.g. when installing a panel light, so that the light comes below the plate. The bracket, which is mounted under the license plate, is designed with the easiest installation possible in mind.\u003c\/p\u003e\n\u003cp\u003eThe holder is made of 2.5 mm thick metal, the surface of which is finished with black powder paint that provides excellent protection against external stresses, such as UV radiation and chemicals. The sturdy stand can easily support the weight of two heavier lights, so it can also be used to mount two large 9\" (up to 240 mm) diameter lights. Of course, the mounting of the stand to the bumper also plays a major role in the stability of the installation, which is worth taking care of properly.\u003c\/p\u003e\n\u003cp\u003eSpecifications\u003c\/p\u003e\n\u003cp\u003eWhat: Auxiliary light holder for EU license plate, Purelux\u003cbr\u003eIntended use: Installing auxiliary lights in a car\u003cbr\u003eSuitable for 2 round or 1 auxiliary light panel\u003cbr\u003eCompatible with EU plate\u003cbr\u003eDimensions:\u003cbr\u003eWidth: 430 mm\u003cbr\u003eHeight: 90mm\u003cbr\u003eDistance between outermost mounting points: 389 mm\u003cbr\u003eAuxiliary light mounting holes size: approx. 12 x 25 mm\u003cbr\u003eBracket depth: 50 mm\u003c\/p\u003e","brand":"Purelux","offers":[{"title":"Default Title","offer_id":52077561577810,"sku":"17305","price":19.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/2833\/9608\/files\/IMG_7930.jpg?v=1763594018"},{"product_id":"number-plate-mounting-bracket-for-3-spot-lights-purelux","title":"Number Plate Mounting Bracket for 3 Spot Lights - Purelux","description":"\u003cp\u003ePurelux's sturdy auxiliary light holder for three round auxiliary lights that can be installed behind the license plate. The holder is installed discreetly behind the car's license plate, so that nothing is visible from the holder itself except the mounting brackets to which the auxiliary lights are attached, and the lights are placed neatly above the license plate. The holder, which is mounted under the license plate, is designed with the easiest installation possible in mind.\u003c\/p\u003e\n\u003cp\u003eThe holder is made of 3 mm thick metal, which is finished with black powder paint that protects against external stresses. The sturdy rack can easily support the weight of three auxiliary lights, but of course the mounting of the rack to the bumper also plays a big role in the stability of the installation, so it is worth taking good care of it. This rack can accommodate 3 lights with a maximum diameter of approx. 190 mm.\u003c\/p\u003e\n\u003cp\u003eSpecifications\u003c\/p\u003e\n\u003cp\u003eWhat: Auxiliary light bracket for EU license plate, Purelux\u003cbr\u003eIntended use: Installing auxiliary lights in a car\u003cbr\u003eSuitable for 3 round additional lights with a maximum width of 190 mm\u003cbr\u003eCompatible with EU plate\u003cbr\u003eDimensions:\u003cbr\u003eWidth: 430mm\u003cbr\u003eHeight: 90mm\u003cbr\u003eDistance between outermost mounting points: 389 mm\u003cbr\u003eDistance between the outermost and middle mounting points: 194 mm\u003cbr\u003eAuxilairy light mounting holes size: approx. 12 x 25 mm\u003cbr\u003eBracket depth: 50 mm\u003c\/p\u003e","brand":"Purelux","offers":[{"title":"Default Title","offer_id":52077612368210,"sku":null,"price":24.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/2833\/9608\/files\/IMG_7934.jpg?v=1763596106"},{"product_id":"number-plate-mounting-bracket-for-4-spot-lights-or-light-bars-purelux","title":"WRC Number Plate Mounting Bracket for 4 Spot Lights or Light Bars - Purelux","description":"\u003cp\u003eRobust, extra thick (3 mm) extra light holder intended for up to 4 extra lights with a diameter of 230 mm. Compatible with EU plates.\u003c\/p\u003e\n\u003cp\u003ePurelux WRC is a series of additional light holders intended for mounting behind the license plate. This additional light holder is intended for mounting up to four round additional lights behind the license plate, on the car's front bumper. The auxiliary light holder has four separate holders for auxiliary lights with a maximum diameter of 230 mm, so this holder is also suitable for larger 9\" round auxiliary lights. The holder mounts discreetly behind the license plate, so the installation is neat and unobtrusive. The WR C holder is thicker than a standard holder (3 mm), and its robust and durable construction ensures that it will not bend or start to sway under the weight of large lamps, as long as the attachment to the bumper is correctly adjusted.\u003c\/p\u003e\n\u003cp\u003eThere are 12.5 x 30 mm grooves on the stand for the additional lights, which enables versatile mounting of different additional lights, as well as their adjustment in depth. The auxiliary light holder also has several mounting holes, which means that it can be easily mounted on the bumper. The extra light holders in the WRC series are compatible with EU license plates. The distance between the mounting holes in the upper row is 245 mm and in the lower row 641 mm. The total width of the holder is 673 mm.\u003c\/p\u003e\n\u003cp\u003eTechnical specification\u003c\/p\u003e\n\u003cp\u003eMake and model: Extra light holder Purelux WRC, 4 extra lights\u003cbr\u003eArea of use: Mount additional lights on vehicles\u003cbr\u003eCompatible with EU license plate\u003cbr\u003eSuitable for 1-4 round extra lights\u003cbr\u003eLight max. diameter: 230 mm\u003cbr\u003eMeasure:\u003cbr\u003eWidth: 673 mm\u003cbr\u003eHeight: 139 mm\u003cbr\u003eDimensions of mounting holes:\u003cbr\u003eDistance between the lower holes: 641 mm\u003cbr\u003eDistance between the upper holes: 245 mm\u003cbr\u003eThickness: 3 mm\u003cbr\u003eWeight: 1600 g\u003c\/p\u003e","brand":"Purelux","offers":[{"title":"Default Title","offer_id":52077664207186,"sku":null,"price":39.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/2833\/9608\/files\/purelux_wrc4_mount_customer_image_1.jpg?v=1763596511"},{"product_id":"purelux-buckler-van-interior-light-reverse-light-scene-light-flat-bar-or-angled-mounts","title":"Purelux Buckler Van Interior Light \/ Reverse Light \/ Scene Light - Flat, Bar or Angled Mounts","description":"\u003cp\u003eCompact and graceful work light for lighting e.g. cargo spaces, stairs and cabins of heavy equipment. Wide and even light beam, neutral 5000K color temperature. Declared light output 945 lm, IP68 classification.\u003c\/p\u003e\n\u003cp\u003eThe Purelux Buckler is a really graceful, compact and versatile work light that illuminates its surroundings widely and evenly, according to the manufacturer, with a light output of up to 945 lumens. It is perfectly suited for e.g. for lighting pallets, cargo spaces, cabins and stairs of heavy equipment, etc., and thanks to the highest possible tightness rating (IP68), it can also be used for lighting areas outside the vehicle, for example in vans, construction site vehicles or small work machines. Thanks to high-performance LEDs and a light beam that opens evenly and widely, even a few lights are easily enough to illuminate, for example, the entire trunk of a van, and by using several lamps, even larger spaces can be illuminated evenly. Buckler is equipped with a neutral color temperature of 5000 Kelvin, which is pleasant to the eyes and well suited for working, so these lights can also be used to illuminate spaces where you work for longer periods at a time.\u003c\/p\u003e\n\u003cp\u003eBuckler comes with three different installation frames, which allow the light to be installed either on the ceiling line (pointing downwards), on curved surfaces (e.g. pipes) or on traditionally flat and straight surfaces. Thanks to its compact size and versatile mounting options, Buckler can be installed practically anywhere, and the frame made of an excellent corrosion-resistant aluminum alloy ensures that fluctuating temperatures or humidity do not limit the use of the light. The lamp is protected against radio interference according to the ECE R10 standard, and thanks to the wide range of operating voltages (9-36V), the light can be installed in both 12V and 24V systems. Two-year (24 months) warranty!\u003c\/p\u003e\n\u003cp\u003eDelivery content\u003cbr\u003ePurelux Buckler\u003cbr\u003eMounting frame for flat surfaces\u003cbr\u003eMounting frame for curved surfaces\u003cbr\u003eInstallation frame for corners\u003cbr\u003eTechnical information\u003c\/p\u003e\n\u003cp\u003eBrand and model: Purelux Buckler\u003cbr\u003ePurpose: As a work light in cars \/ work machines\u003cbr\u003eLED: 6 x 1.5 W\u003cbr\u003eOperating voltage: 9-36V (DC)\u003cbr\u003ePower consumption measured by Valostore:\u003cbr\u003ePower declared by the manufacturer: 7W\u003cbr\u003eLight output declared by the manufacturer: 945 lm\u003cbr\u003eColor temperature stated by the manufacturer: 5000 K\u003cbr\u003eMounting: Surface mounting\u003cbr\u003eConnector: No connector, straight wires\u003cbr\u003eCable length: approx. 500 mm\u003cbr\u003eDimensions (without frame): 72 x 39 x 13 mm\u003cbr\u003eWeight: 75 g\u003cbr\u003eIP rating: IP68\u003cbr\u003eOperating temperature: -40°C to +80°C\u003cbr\u003eApprovals: EMC: ECE: R10\u003cbr\u003eWarranty: 24 months\u003c\/p\u003e","brand":"Purelux","offers":[{"title":"Default Title","offer_id":52077868679506,"sku":"HS16953","price":24.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/2833\/9608\/files\/purelux_buckler_customer_pic.jpg?v=1763596978"},{"product_id":"purelux-blizzard-teleporter-telehandler-led-headlight-pair-horizontal-or-vertical-mount-amber-or-white-parking-light-heated-lens","title":"Purelux Blizzard Teleporter \/ Telehandler LED Headlight Pair - Horizontal or Vertical Mount Amber or White Parking Light (Heated Lens)","description":"\u003cp\u003e2x Headlights, Left \u0026amp; Right\u003c\/p\u003e\n\u003cp\u003eVersatile plough light with dipped and main beam, direction indicator, white parking light and automatically warming lens. Particularly suitable for heavy vehicles such as tractors, loaders and ploughs. Measured light output of high beam 2508 lm, range 271 m @ 1 lux, low beam 963 lm, range 170 m @ 1 lux.\u003c\/p\u003e\n\u003cp\u003ePurelux Blizzard is a versatile plow light approved for road use, equipped with separate high and low beams, direction indicator, parking light function and heated lens. Another exceptional feature is that the direction indicator and parking light module can be mounted either on the right or left side of the light, or alternatively on top of the light. So there is no need to buy a separate left and right-hand version of the Blizzard; the same light can be used on both sides of the vehicle. The wide beam pattern provides a wide and even illumination of the vehicle's immediate surroundings, making it easier to see road edges and ditches, for example, even in challenging conditions. The measured light output for short lights is 963 lumens and a range of 170 meters @ 1 lux, while the measured light output for long lights is 2508 lumens and a range of 271 meters @ 1 lux.\u003c\/p\u003e\n\u003cp\u003eThe Blizzard is an excellent choice for heavier vehicles such as tractors and loaders, but is particularly useful in ploughing equipment where the plough often obscures the vehicle's own lights behind it. The lamp's 4 mm thick tempered glass lens is an effective heat conductor, and the automatically heated lens ensures that the lens stays permanently melted, even in slushing snow or sleet. The heater is always on when the light is on and has its own power cord to connect the heater behind a separate switch. The heating can also be switched on at any time, e.g. when the vehicle is running.\u003c\/p\u003e\n\u003cp\u003eA robust aluminium body, a stainless steel mounting base and the highest possible tightness rating (IP69K) ensure that the luminaire will not give up under heavy use, without being subjected to shocks and bumps or extreme conditions that test its durability. The mounting base supplied with the luminaire can be fixed either to the base or to the rear of the luminaire, depending on the mounting position, so that the luminaire can be adapted to any vehicle. A DT-6 connector is integrated in the rear of the body, and a connector mating part is supplied with the light to facilitate connection.\u003c\/p\u003e\n\u003cp\u003eBasic delivery content\u003cbr\u003ePurelux Blizzard\u003cbr\u003eMounting foot\u003cbr\u003eDT-6 connector mating piece\u003cbr\u003eWiring and installation instructions (EN\/EN\/SE\/NO\/DK)\u003cbr\u003eDelivery content (2 pcs lights + Wiring harness)\u003cbr\u003e2 x basic delivery content\u003cbr\u003eRelay wiring harness Purelux Pro Serie 24V, DT-6\u003cbr\u003eTechnical specifications\u003cbr\u003eMake and model: Purelux Blizzard\u003cbr\u003eIntended use: For use as an aurora for work machines\u003cbr\u003eOperating voltage: 9-32 V\u003cbr\u003eReference number: 17.5\u003cbr\u003ePower measured by the photocell:\u003cbr\u003eLong lights: 41 W\u003cbr\u003eShort lights: 24 W\u003cbr\u003eParking light: 16.5 W\u003cbr\u003eDirection indicator: 6 W\u003cbr\u003eLens heating: 35 W\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eLight output measured by the photocell: 2508 lm (driving beam) \/ 963 lm (passing beam)\u003cbr\u003eRange measured by the photocell:\u003cbr\u003eLong beam: 271 m @ 1 lux \/ 542 m @ 0.25 lux\u003cbr\u003eShort lights: 170 m @ 1 lux \/ 340 m @ 0.25 lux\u003cbr\u003eManufacturer's stated colour temperature: 6000 K\u003cbr\u003eMeasured by the photometer: 5952 K\u003cbr\u003eConnector: DT-6 (integrated in the body)\u003cbr\u003eMaterial: aluminium body, tempered glass lens\u003cbr\u003eDimensions: 228 x 152 x 90.5 mm (L x H x W)\u003cbr\u003eHeight with foot: 197.2 mm\u003cbr\u003eWeight: 2190 g\u003cbr\u003eOperating temperature: -40°C to +60°C\u003cbr\u003eIP rating: IP69K\u003cbr\u003eApprovals: ECE R10, R148, R149\u003cbr\u003eOther: heating resistors in lens, white and orange parking light, orange turn signal light\u003cbr\u003e\u003cbr\u003eInstallation guide\u003c\/p\u003e\n\u003cp\u003eConnection\u003c\/p\u003e\n\u003cp\u003eBlack: Earth (-)\u003cbr\u003eRed: driving lights (+)\u003cbr\u003eYellow: passing lights (+)\u003cbr\u003eGrey: White parking light (+)\u003cbr\u003eGreen: direction indicator (+)\u003cbr\u003eWhite: Lens heating (+)\u003c\/p\u003e","brand":"Purelux","offers":[{"title":"Default Title","offer_id":52432799990098,"sku":null,"price":400.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/2833\/9608\/files\/purelux_blizzard_customer_image_8.jpg?v=1767830233"},{"product_id":"purelux-panther-11-driving-light-10-811lm-amber-or-white-drl-amber-strobe","title":"Purelux Panther 11 Driving Light - 10,811Lm - Amber or White DRL - Amber Strobe","description":"\u003cp\u003eA powerful additional light that shakes up appearance standards, with a stunning combination beam and R65-approved warning light, especially for higher installations and heavy equipment. The lamp has two different power modes and a two-color parking light, measured light output 10811 lm, range 751 m @ 1 lux.\u003c\/p\u003e\n\u003cp\u003ePowerBoost® technology\u003cbr\u003eA beam optimized for heavy equipment\u003cbr\u003eR65 approved warning light\u003cbr\u003e10811 lumens, 751 meters (@ 1 lux)\u003cbr\u003eOptimal 5000K color temperature\u003cbr\u003eStylish two-tone parking light\u003cbr\u003eFrameless Lexan polycarbonate lens\u003cbr\u003eThe Purelux Panther 11 is a \"round\" auxiliary light from its manufacturer's Panther product family, designed specifically for the needs of heavy equipment. Like other lights in the same series, this light cannon is also equipped with top features that will convince even demanding users. Two different power modes, an R65-approved orange warning light, a stunning combination light beam specially designed for high installation locations and an excellent light output of 10811 lumens make the Panther 11 the perfect solution for roof and light rail installations on trucks and vans, as well as vans and SUVs. Thanks to the two different power modes, the same light can be used to its maximum advantage in all situations: the more moderate power mode is approved for road use with a low reference number (20), while the PowerBoost mode, which releases all the power and is intended for off-road use, harnesses the impressive light output and increases the beam range to up to 751 meters (@ 1 lux), saying goodbye to compromises.\u003c\/p\u003e\n\u003cp\u003e\"Notorious Panther performance\"\u003cbr\u003eUnlike usual, there is no need to connect or disconnect any extra cable to activate the different power modes of the light, but switching between PowerBoost® and road mode is done using a unique selector integrated into the user interface. This means that the power mode can be changed easily and quickly directly, even while driving.\u003c\/p\u003e\n\u003cp\u003eNote! The difference between Purelux PowerBoost® and road mode is clearly noticeable in use - PowerBoost® mode is significantly more efficient and should not be used when driving in normal road traffic, only off-road.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThe Panther 11's beam consists of a rectangular, wide main beam, which is a great combination of both range and width. The beam opens up right from the front and illuminates the entire road from side to side, while the brighter main spot in the middle of the beam directs the light far ahead. The beam is very similar in shape to other lights in the Panther series, but compared to the Panther 9, for example, the Panther 11 has a slightly tighter main spot, and its beam is also slightly higher vertically and a little wider in width. The higher beam in the vertical direction makes the Panther 11 an excellent option for higher installation locations, such as upper light bars on trucks and roof installations, while the Panther 9 is a better option for directly in front.\u003c\/p\u003e\n\u003cp\u003eIn addition to its excellent beam, the Panther 11 is also equipped with an R65-approved orange warning light, which can be used, for example, in special transport, when the vehicle is moving from the road to the construction site or for example in traffic control. The bright warning light will not go unnoticed by anyone, so the safety of those working on the vehicle is guaranteed without separate warning lights. The warning light can be installed, for example, behind a separate switch, so that it can be used whenever needed. The warning light has five different flashing functions, and in addition, several lights can be synchronized with each other, so that they can be flashed at the same time and the overall appearance of the vehicle remains consistent.\u003c\/p\u003e\n\u003cp\u003eThe Panther 11's beam is crowned by a neutral 5000 Kelvin color temperature that maximizes the driving experience and visibility. Neutral color temperature is optimal for road traffic, as it makes it easier to observe terrain and obstacles, and it does not impair resolution by distorting the colors of objects visible in front. In addition, neutral color temperature is less dazzling, for example from snow cover or in fog and rain, and reduces eye strain. The 5000K color temperature is also compatible with newer cars that have LED or Xenon lights as standard, and also brings the desired brightness and sharpness alongside traditional halogen lights.\u003c\/p\u003e\n\u003cp\u003eThe Panther 11 looks different from what you are used to, and its unique design, the orange or white parking light that runs spectacularly along the bottom edge of the lens, and the dark optics give it a unique overall look. The brazenly non-standard appearance combined with the 11\" size and fierce performance make the Panther 11 an excellent addition to the equipment of heavy equipment and construction vehicles, as well as vans and SUVs. The exceptionally low reference number of the lamp (20) allows the installation of several lamps on the same vehicle without having to take your own high beams out of use, so the bravest can easily install this light cannon on passenger cars too!\u003c\/p\u003e\n\u003cp\u003e\"Purelux Panther series is made with uncompromising quality and top of the line performance. Every feature is finely tuned to fit any type of situation and vehicle. Don't hesitate, ride with the Panther!\" - Purelux\u003c\/p\u003e\n\u003cp\u003eThe light comes with a mounting foot, and installation is made easier by the 2-pole DTP connector already installed in the light's power cable, as well as separate wires from the power cable for the parking lights, hazard warning light and hazard light synchronization. In addition, the Panther 11 also has a ready-made mounting hole for the top support bar, which enables a sturdy installation. The light comes with a stylish black stone chip guard with the Purelux logo, which reveals the parking light line, allowing the parking lights to be used even in summer, when the rest of the light is protected from flying stones and sand dust. The wide operating voltage range (9-36V) allows installation in both 12V and 24V systems. The light is radio interference-protected in accordance with the ECE R10 standard. Three-year (36-month) warranty!\u003c\/p\u003e\n\u003cp\u003eBasic delivery content (1 pc.)\u003cbr\u003ePurelux Panther 11\u003cbr\u003eMounting foot\u003cbr\u003ePower cord with DTP-2 connector\u003cbr\u003eStone chip protection, black\u003cbr\u003eConnection and installation instructions (FI\/SE\/NO\/DK)\u003c\/p\u003e\n\u003cp\u003eSpecifications\u003cbr\u003eBrand and model: Purelux Panther 11\u003cbr\u003eIntended use: As an additional light in cars \/ work machines\u003cbr\u003eOperating voltage: 9-36 V (DC)\u003cbr\u003eReference number: 20\u003cbr\u003eRated power: 170 W\u003cbr\u003ePower consumption measured by the light bulb\u003cbr\u003ePurelux PowerBoost®: 6.92A @ 24V\u003cbr\u003eRoad mode: 0.99A @ 24V\u003cbr\u003eWarning light: 1.45A @ 24V\u003cbr\u003ePower measured by the light bulb\u003cbr\u003ePurelux PowerBoost®: 166W\u003cbr\u003eRoad mode: 23.7 W\u003cbr\u003eWarning light: 35 W\u003cbr\u003eParking lights: 2 W\u003cbr\u003eLuminous efficacy measured by Valostore: 10811 lm (Purelux PowerBoost®) \/ 2205 lm (Road mode)\u003cbr\u003eRange measured by the light tower: 751 m @ 1 lux \/ 1502 m @ 0.25 lux (Purelux PowerBoost®)\u003cbr\u003eRange measured by the beacon: 340 m @ 1 lux \/ 680 m @ 0.25 lux (Road mode)\u003cbr\u003eRange with multiple lights, measured (PowerBoost® \/ E-approved, @ 1 lux):\u003cbr\u003eWith two: 1062 m \/ 395 m (@ 1 lux)\u003cbr\u003eWith three: 1301 m \/ 483 m (@ 1 lux)\u003cbr\u003eWith four: 1502 m \/ 558 m (@ 1 lux)\u003cbr\u003eManufacturer's stated color temperature: 5000 K\u003cbr\u003eMounting: Mounting foot\u003cbr\u003eConnector: DTP-2\u003cbr\u003eParking lights and hazard warning lights + separate wires\u003cbr\u003eCable length: approx. 100 cm\u003cbr\u003eDimensions: 244 x 132 x 77 mm (Width x Height x Depth)\u003cbr\u003eHeight with mounting foot:\u003cbr\u003eWeight: 1624g\u003cbr\u003eIP rating: IP69K\u003cbr\u003eApprovals: ECE R10, R149, R65, CE, RoHS\u003cbr\u003eRoad traffic approval does not apply to Purelux PowerBoost® mode\u003cbr\u003eChange: There is a ready place for the support rail in the light\u003cbr\u003eWarranty: 36 months\u003cbr\u003eInstallation guide\u003cbr\u003eCoupling\u003c\/p\u003e\n\u003cp\u003eDTP connector: Additional light\u003cbr\u003eYellow: Orange parking light\u003cbr\u003eWhite: White parking light\u003cbr\u003eGreen: Warning light (R65)\u003cbr\u003eGray: Hazard light synchronization \/ hazard light mode switching\u003cbr\u003eChanging the power mode with UI technology: The light will turn on in PowerBoost mode when first used. To change the power mode, turn the light off, then turn it on for two seconds, and turn the light off and on twice within 1.5 seconds to change the power mode. Repeat to change the power mode again.\u003c\/p\u003e\n\u003cp\u003eSynchronization and warning light functions:\u003c\/p\u003e\n\u003cp\u003eWarning light: Connect the green wire to power (+)\u003cbr\u003eSynchronization: Synchronize multiple warning lights by connecting the gray wires together\u003cbr\u003eWarning light pattern: Connect the gray wire to power (+) for less than 1 second, the pattern will change\u003cbr\u003eReset: Connect the gray wire to power (+) for at least 3 seconds to return directly to the first warning light pattern\u003c\/p\u003e","brand":"Purelux","offers":[{"title":"Default Title","offer_id":52753653367122,"sku":null,"price":224.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/2833\/9608\/files\/IMG_01222.jpg?v=1771631368"},{"product_id":"d3s-led-xenon-replacement-bulbs-purelux-blaze-plug-play-12v-24v-pair","title":"D3S LED Xenon Replacement Bulbs - Purelux Blaze Plug \u0026 Play - 12v\/24v - Pair","description":"\u003cp\u003e2x Bulbs\u003c\/p\u003e\n\u003cp\u003eLED bulbs with great performance, which can be easily replaced in a Plug\u0026amp;Play type for the original D3S-based xenon bulbs. Up to 50% better light output compared to original xenons! The package contains 2 bulbs, declared light output 4000 lm per bulb, color temperature 4300K.\u003c\/p\u003e\n\u003cp\u003ePurelux Blaze LED D3S headlight bulbs are LED bulbs with top-class performance, which are Plug\u0026amp;Play-type direct replacements for original D3S-based xenon bulbs. Blaze LED bulbs are optimized to work perfectly with the projector lamps of vehicles equipped with xenon lights, i.e. their use does not require any changes to the bulbs. They offer up to 50% better light output compared to the original xenons, and their driving-optimized light beam, glare-free light pattern and insanely strong 4000 lumen light output (per bulb) increase driving safety and give the driver significantly more reaction time to observe changes on the road.\u003c\/p\u003e\n\u003cp\u003eIn the manufacture of the bulbs, high-quality CSP LEDs and an advanced temperature regulation system have been used, thanks to which their lifespan is up to 50,000 hours, i.e. significantly longer than other LED bulbs on the market! The neutral 4300 kelvin color tone of Blaze LED bulbs facilitates e.g. observation of terrain shapes and obstacles and choosing the right driving line, besides which it maintains a level of alertness. Precisely directed LED chips, combined with tremendous light output and neutral color temperature, create a perfect light beam for road traffic, which makes driving more pleasant and, above all, safer.\u003c\/p\u003e\n\u003cp\u003eBlaze LED bulbs are designed to be as easy to use as possible, and their one-piece construction enables effortless installation. The bulbs take advantage of the vehicle's built-in ballast, so you don't need anything else besides the bulbs. Unlike many other LED bulbs, Purelux Blaze LED bulbs are suitable for both 12V and 24V systems, i.e. they are suitable for most passenger car models as well as heavy equipment vehicles. The bulbs are protected against radio interference according to the ECE R10 standard, but they are not approved for road traffic. Two-year (24 months) warranty!\u003c\/p\u003e\n\u003cp\u003eTechnical information\u003c\/p\u003e\n\u003cp\u003eProduct: Purelux Blaze LED, D3S\u003cbr\u003eOperating voltage: 12V \/ 24V\u003cbr\u003eRated power: 35 W\u003cbr\u003eDeclared light output: 4000 lm \/ bulb\u003cbr\u003eDeclared color temperature: 4300 K\u003cbr\u003eBulb base: D3S\u003cbr\u003eService life: 50,000 h\u003cbr\u003ePackaging: Contains 2 bulbs\u003cbr\u003eUp to 50% brighter (compared to original xenon bulbs)\u003cbr\u003eWorks in a Plug\u0026amp;Play manner\u003cbr\u003eCompatible with projector screens\u003cbr\u003eApprovals: ECE: R10, CE, RoHS, WEEE\u003cbr\u003eNOT E-approved\u003cbr\u003e\u003c\/p\u003e","brand":"Purelux","offers":[{"title":"Default Title","offer_id":52781260538194,"sku":"HS17479","price":109.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/2833\/9608\/files\/IMG_0185_74e30993-b34f-4d47-b59d-a6f181b4cd24.jpg?v=1771885881"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0499\/2833\/9608\/collections\/logo-purelux.png?v=1749080088","url":"https:\/\/autosparky.ie\/collections\/pureluk\/taillight.oembed","provider":"Auto Sparky","version":"1.0","type":"link"}