Cart 0
9" 120Watt LED Driving Light with Dual Colour Position & Amber Warning Strobe
9" 120Watt LED Driving Light with Dual Colour Position & Amber Warning Strobe
9" 120Watt LED Driving Light with Dual Colour Position & Amber Warning Strobe
9" 120Watt LED Driving Light with Dual Colour Position & Amber Warning Strobe
9" 120Watt LED Driving Light with Dual Colour Position & Amber Warning Strobe

9" 120Watt LED Driving Light with Dual Colour Position & Amber Warning Strobe

Tax included. Shipping calculated at checkout.

1x Light per Box

LG877 - 120 Watt 9” LED Driving Light with Dual Colour Position & Amber Warning Strobe

In addition to a wide and long light pattern with the Driving beam from the TIR reflectors with 480 meters at 1 Lux, it also has selectable position light (white or orange), stable attachment, electronic temperature optimization, The built in Warning Strobes also has an ECE R65 approved strobe light. This warning light consists of four powerful LEDs that can be set in five different flash patterns.

Specifications:
Five different warning light patterns, one that is ECE R65 approved
Synchronize with each other
E marked (E8, ref. 37,5), ECE R112 / R10 / R7 (white position light)
EMC secured (does not disturb the radio)
With position light (4 LEDs) yellow-orange or xenon white (connect the colour you want)
Driving beam light pattern with range: 960 m (0.25 lux), 480 m (1 lux)
Spot beam light pattern with range: 1148 m (0,25 lux), 574 m (1 lux)
12000 lumens (theoretical), 9600 lumens (actual)
Cold White Light (6500 K)
TIR optical system (Total Inner Reflection)
Pressure equalization membrane

Technical data:
120 W (12 x 10 W Cree XM-L2 LED)
4 pcs LED for strobe light
Nominal power 92,4 W
IP68 (water/dust proof)
6 pole DT connector (2-pin adapter included)
Electronic heat management
Voltage 9-36 V
Load 7,7 A @ 12 V and 3,6 A @ 24 V


Measurement & weight:
Width: 218 mm
Height: 234,5 mm (incl bracket)
Depth: 68,5 mm
Weight: 1,9 kg
Cable length: 650 mm


Installation instructions for cables (detailed instructions included with the product):
Red: Auxiliary light (+)
Black: Auxiliary light/ Position light (- ground)
Grey: Position light (+) white light
Yellow: Position light (+) orange light
Green: Strobe light (+)
Blue: Strobe light switch of pattern / synchronization
Strobe pattern synchronization: Connect the blue wires of two or more auxiliary lights, then momentarily connect these to the positive terminal for 3 seconds to reset the strobe frequency on all connected lights, then all flash patterns are shifted.